The Electrical Equipment (Safety) Regulations 2016

Regulation 42

SCHEDULE 6 U.K. Compliance, withdrawal and recall notices

Compliance notice U.K.

1.—(1) An enforcing authority may serve a compliance notice on a relevant economic operator in respect of electrical equipment if the authority has reasonable grounds for believing that there is non-compliance with the requirements of these Regulations.

(2) A compliance notice must—

(a) require the relevant economic operator on which it is served to—

(i) end the non-compliance within such period as may be specified in the notice; or

(ii) provide evidence, within such period as may be specified in the notice, demonstrating to the satisfaction of the enforcing authority that the non-compliance has not in fact occurred;

(b) warn the economic operator that, if the non-compliance persists or if satisfactory evidence has not been produced under paragraph (a) within the period specified in the notice, further action may be taken in respect of the electrical equipment or any electrical equipment of the same type made available on the market by that relevant economic operator.

(3) A compliance notice may include directions as to the measures to be taken by the economic operator to secure compliance, including different ways of securing compliance.

(4) Subject to sub-paragraph (5), an enforcing authority may revoke or vary a compliance notice by serving a notification on the economic operator.

(5) An enforcing authority may not vary a compliance notice so as to make it more restrictive for the economic operator or more onerous for the economic operator to comply.

Withdrawal notice U.K.

2.—(1) An enforcing authority may serve a withdrawal notice on a relevant economic operator in respect of electrical equipment if the authority has reasonable grounds for believing that—

(a) the electrical equipment has been made available on the market; and

(b) either of the following conditions are met—

(i) the electrical equipment presents a risk; or

(ii) the electrical equipment is not in conformity with the requirements of these Regulations or RAMS (in its application to electrical equipment).

(2) A withdrawal notice must prohibit the relevant economic operator from making the electrical equipment available on the market without the consent of the enforcing authority.

(3) A withdrawal notice may require the relevant economic operator to take action to alert end-users to any risk presented by the electrical equipment.

(4) A withdrawal notice may require the relevant economic operator to keep the enforcing authority informed of the whereabouts of any electrical equipment referred to in the notice.

(5) A consent given by the enforcing authority pursuant to a withdrawal notice, may impose such conditions on the making available on the market as the enforcing authority considers appropriate.

Recall notice U.K.

3.—(1) The enforcing authority may serve a recall notice on a relevant economic operator in respect of electrical equipment if the authority has reasonable grounds for believing that—

(a) the electrical equipment has been made available to end-users; and

(b) either of the following conditions is met—

(i) the electrical equipment presents a risk;

(ii) the electrical equipment is not in conformity with the requirements of these Regulations or RAMS (in its application to electrical equipment).

(2) A recall notice must require the relevant economic operator to use reasonable endeavours to organise the return of the electrical equipment from end-users to the relevant economic operator or another person specified in the notice.

(3) A recall notice may—

(a) require the recall to be effected in accordance with a code of practice;

(b) require the relevant economic operator to—

(i) contact end-users in order to inform them of the recall, to the extent that it is practicable to do so;

(ii) publish a notice in such form and manner as is likely to bring to the attention of end-users any risk the electrical equipment poses and the fact of the recall;

(iii) make arrangements for the collection or return of the electrical equipment from end-users or its disposal;

(c) impose such additional requirements on the relevant economic operator as are reasonable and practicable with a view to achieving the return of the electrical equipment.

(4) In determining what requirements to include in a recall notice, the enforcing authority must take into consideration the need to encourage distributors and end-users to contribute to its implementation.

(5) A recall notice may only be issued by the enforcing authority where—

(a) other action which it may require under these Regulations would not suffice to address the non-compliance;

(b) the action being undertaken by the relevant economic operator in fulfilment of the requirements of these Regulations is unsatisfactory or insufficient to address the non-compliance;

(c) the enforcing authority has given not less than ten days' notice to the relevant economic operator of its intention to serve such a notice; and

(d) the enforcing authority has taken account of any advice obtained under sub-paragraph (6).

(6) A relevant economic operator which has received notice from the enforcing authority of an intention to serve a recall notice may at any time prior to the service of the recall notice require the authority to seek the advice of such person as the Institute determines on the questions of—

(a) whether there is non-compliance; and

(b) whether the issue of a recall notice would be proportionate.

(7) Sub-paragraph (5)(b), (c) and (d) do not apply in the case of electrical equipment presenting a serious risk requiring, in the view of the enforcing authority, urgent action.

(8) Where a relevant economic operator requires the enforcing authority to seek advice under sub-paragraph (6), that relevant economic operator is to be responsible for the fees, costs and expenses of the Institute and of the person appointed by the Institute to advise the enforcing authority.

(9) In this paragraph, “Institute” means the charitable organisation with registered number 803725 and known as the Chartered Institute of Arbitrators.

(10) A recall notice served by the enforcing authority may require the relevant economic operator to keep the authority informed of the whereabouts of electrical equipment to which the recall notice relates, so far as the relevant economic operator is able to do so.

Interpretation U.K.

4.  In this Schedule, “ non-compliance” means that the electrical equipment—

(a) presents a risk; or

(b) is not in conformity with the requirements of these Regulations or RAMS (in its application to electrical equipment).