Commission Implementing Regulation (EU) 2016/799Dangos y teitl llawn

4.5.4 Workshop card U.K.

4.5.4.1 Tachograph application (accessible to first and second generation vehicle units) U.K.

4.5.4.1.1 Application identification U.K.

(307) The workshop card shall be able to store the following application identification data: U.K.

• tachograph application identification,

• type of tachograph card identification.

4.5.4.1.2 Keys and certificates U.K.

(308) The workshop card shall be able to store a number of cryptographic keys and certificates, as specified in Appendix 11 part A. U.K.

(309) The workshop card shall be able to store a Personal Identification Number (PIN code). U.K.

4.5.4.1.3 Card identification U.K.

(310) The workshop card shall be able to store the following card identification data: U.K.

• card number,

• issuing Member State, issuing authority name, issue date,

• card beginning of validity date, card expiry date.

4.5.4.1.4 Card holder identification U.K.

(311) The workshop card shall be able to store the following card holder identification data: U.K.

• workshop name,

• workshop address,

• surname of the holder,

• first name(s) of the holder,

• preferred language.

4.5.4.1.5 Card download U.K.

(312) The workshop card shall be able to store a card download data record in the same manner as a driver card. U.K.

4.5.4.1.6 Calibration and time adjustment data U.K.

(313) The workshop card shall be able to hold records of calibrations and/or time adjustments performed while the card is inserted in a recording equipment. U.K.

(314) Each calibration record shall be able to hold the following data: U.K.

• Purpose of calibration (activation, first installation, installation, periodic inspection,),

• Vehicle identification,

• Parameters updated or confirmed (w, k, l, tyre size, speed limiting device setting, odometer (new and old values), date and time (new and old values)),

• Recording equipment identification (VU part number, VU serial number, motion sensor serial number).

(315) The workshop card shall be able to store at least 88 such records. U.K.

(316) The workshop card shall hold a counter indicating the total number of calibrations performed with the card. U.K.

(317) The workshop card shall hold a counter indicating the number of calibrations performed since its last download. U.K.

4.5.4.1.7 Events and faults data U.K.

(318) The workshop card shall be able to store events and faults data records in the same manner as a driver card. U.K.

(319) The workshop card shall be able to store data for the three most recent events of each type (i.e. 18 events) and the six most recent faults of each type (i.e. 12 faults). U.K.

4.5.4.1.8 Driver activity data U.K.

(320) The workshop card shall be able to store driver activity data in the same manner as a driver card. U.K.

(321) The workshop card shall be able to hold driver activity data for at least 1 day of average driver activity. U.K.

4.5.4.1.9 Vehicles used data U.K.

(322) The workshop card shall be able to store vehicles used data records in the same manner as a driver card. U.K.

(323) The workshop card shall be able to store at least 4 such records. U.K.

4.5.4.1.10 Daily work periods start and/or end data U.K.

(324) The workshop card shall be able to store daily works period start and/or end data records in the same manner as a driver card. U.K.

(325) The workshop card shall be able to hold at least 3 pairs of such records. U.K.

4.5.4.1.11 Card session data U.K.

(326) The workshop card shall be able to store a card session data record in the same manner as a driver card. U.K.

4.5.4.1.12 Control activity data U.K.

(327) The workshop card shall be able to store a control activity data record in the same manner as a driver card. U.K.

4.5.4.1.13 Specific conditions data U.K.

(328) The workshop card shall be able to store data relevant to specific conditions in the same manner as the driver card. U.K.

(329) The workshop card shall be able to store at least 2 such records. U.K.

4.5.4.2 Tachograph generation 2 application (not accessible to first generation vehicle unit) U.K.

4.5.4.2.1 Application identification U.K.

(330) The workshop card shall be able to store the following application identification data: U.K.

• tachograph application identification,

• type of tachograph card identification.

4.5.4.2.2 Keys and certificates U.K.

(331) The workshop card shall be able to store a number of cryptographic keys and certificates, as specified in Appendix 11 part B. U.K.

(332) The workshop card shall be able to store a Personal Identification Number (PIN code). U.K.

4.5.4.2.3 Card identification U.K.

(333) The workshop card shall be able to store the following card identification data: U.K.

• card number,

• issuing Member State, issuing authority name, issue date,

• card beginning of validity date, card expiry date.

4.5.4.2.4 Card holder identification U.K.

(334) The workshop card shall be able to store the following card holder identification data: U.K.

• workshop name,

• workshop address,

• surname of the holder,

• first name(s) of the holder,

• preferred language.

4.5.4.2.5 Card download U.K.

(335) The workshop card shall be able to store a card download data record in the same manner as a driver card. U.K.

4.5.4.2.6 Calibration and time adjustment data U.K.

(336) The workshop card shall be able to hold records of calibrations and/or time adjustments performed while the card is inserted in a recording equipment. U.K.

(337) Each calibration record shall be able to hold the following data: U.K.

• purpose of calibration (activation, first installation, installation, periodic inspection,),

• vehicle identification,

• parameters updated or confirmed (w, k, l, tyre size, speed limiting device setting, odometer (new and old values), date and time (new and old values),

• recording equipment identification (VU part number, VU serial number, motion sensor serial number, remote communication facility serial number and external GNSS facility serial number, if applicable),

• seal type and identifier of all seals in place,

• ability of the VU to use first generation tachograph cards (enabled or not).

(338) The workshop card shall be able to store at least 88 such records. U.K.

(339) The workshop card shall hold a counter indicating the total number of calibrations performed with the card. U.K.

(340) The workshop card shall hold a counter indicating the number of calibrations performed since its last download. U.K.

4.5.4.2.7 Events and faults data U.K.

(341) The workshop card shall be able to store events and faults data records in the same manner as a driver card. U.K.

(342) The workshop card shall be able to store data for the three most recent events of each type (i.e. 33 events) and the six most recent faults of each type (i.e. 12 faults). U.K.

4.5.4.2.8 Driver activity data U.K.

(343) The workshop card shall be able to store driver activity data in the same manner as a driver card. U.K.

(344) The workshop card shall be able to hold driver activity data for at least 1 day of average driver activity. U.K.

4.5.4.2.9 Vehicles used data U.K.

(345) The workshop card shall be able to store vehicles used data records in the same manner as a driver card. U.K.

(346) The workshop card shall be able to store at least 4 such records. U.K.

4.5.4.2.10 Daily work periods start and/or end data U.K.

(347) The workshop card shall be able to store daily works period start and/or end data records in the same manner as a driver card. U.K.

(348) The workshop card shall be able to hold at least 3 pairs of such records. U.K.

4.5.4.2.11 Card session data U.K.

(349) The workshop card shall be able to store a card session data record in the same manner as a driver card. U.K.

4.5.4.2.12 Control activity data U.K.

(350) The workshop card shall be able to store a control activity data record in the same manner as a driver card. U.K.

4.5.4.2.13 Vehicle units used data U.K.

(351) The workshop card shall be able to store the following data related to the different vehicle units in which the card was used: U.K.

• the date and time of the beginning of the period of use of the vehicle unit (i.e. first card insertion in the vehicle unit for the period),

• the manufacturer of the vehicle unit,

• the vehicle unit type,

• the vehicle unit software version number.

(352) The workshop card shall be able to store at least 4 such records. U.K.

[F1 4.5.4.2.14 Three hours accumulated driving places data U.K.

(353) The workshop card shall be able to store the following data related to the position of the vehicle where the accumulated driving time reaches a multiple of three hours: U.K.

• the date and time when the accumulated driving time reaches a multiple of three hours,

• the position of the vehicle,

• the GNSS accuracy, date and time when the position was determined,

• the vehicle odometer value.

(354) The workshop card shall be able to store at least 18 such records.] U.K.

Textual Amendments

F1 Substituted by Commission Implementing Regulation (EU) 2018/502 of 28 February 2018 amending Implementing Regulation (EU) 2016/799 laying down the requirements for the construction, testing, installation, operation and repair of tachographs and their components (Text with EEA relevance).

4.5.4.2.15 Specific conditions data U.K.

(355) The workshop card shall be able to store data relevant to specific conditions in the same manner as the driver card. U.K.

(356) The workshop card shall be able to store at least 2 such records. U.K.