Search Legislation

The Smoke Control Areas (Authorised Fuels) (England) Regulations 2012

What Version

 Help about what version
  • Latest available (Revised)
  • Original (As made)

Status:

This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Statutory Instruments

2012 No. 814

Clean Air, England

The Smoke Control Areas (Authorised Fuels) (England) Regulations 2012

Made

13th March 2012

Laid before Parliament

16th March 2012

Coming into force

6th April 2012

The Secretary of State makes the following Regulations in exercise of the powers conferred by sections 20(6) and 63(1) of the Clean Air Act 1993(1).

Citation, application and commencement

1.  These Regulations—

(a)may be cited as the Smoke Control Areas (Authorised Fuels) (England) Regulations 2012;

(b)apply in England; and

(c)come into force on 6th April 2012.

Authorised fuels for the purposes of Part III of the Clean Air Act 1993

2.  For the purposes of Part III of the Clean Air Act 1993, the following are authorised fuels—

(a)anthracite;

(b)semi-anthracite;

(c)electricity;

(d)gas;

(e)low volatile steam coals; and

(f)the fuels described in Schedule 1.

Revocations

3.  The regulations listed in Schedule 2 are revoked.

Taylor of Holbeach

Parliamentary Under Secretary of State

Department for Environment, Food and Rural Affairs

13th March 2012

Regulation 2(f)

SCHEDULE 1Authorised fuels

1.  Aimcor Excel briquettes, manufactured by Applied Industrial Materials UK Limited at Newfield, County Durham, or manufactured by Oxbow Carbon & Minerals UK Limited, Windsor House, Cornwall Road, Harrogate, North Yorkshire, which—

(a)comprise petroleum coke (as to 60 to 75% of the total weight), low volatile coal and reactive coke (as to 20 to 25% of the total weight) and cold-setting resin binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing;

(c)are unmarked pillow-shaped briquettes;

(d)have an average weight of 73 grams per briquette; and

(e)have a sulphur content not exceeding 2% of the total weight.

2.  Aimcor Pureheat briquettes, manufactured by Applied Industrial Materials UK Limited at Immingham, North East Lincolnshire, or manufactured by Oxbow Carbon & Minerals UK Limited, Windsor House, Cornwall Road, Harrogate, North Yorkshire, which—

(a)comprise anthracite (as to approximately 60% of the total weight), petroleum coke (as to approximately 25% of the total weight) and binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at about 250°C;

(c)are pillow-shaped briquettes with a single line indentation on one side and a double line indentation on the reverse side;

(d)have an average weight of 75 grams per briquette; and

(e)have a sulphur content not exceeding 2% of the total weight.

3.  Ancit briquettes, manufactured by Coal Products Limited at Immingham Briquetting Works, Immingham, North East Lincolnshire, which—

(a)comprise anthracite (as to approximately 60 to 95% of the total weight), petroleum coke (up to approximately 30% of the total weight), bituminous coal (up to approximately 15% of the total weight) and a molasses and phosphoric acid binder or an organic binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at about 300°C;

(c)are unmarked cushion-shaped briquettes;

(d)have an average weight of 48 grams per briquette; and

(e)have a sulphur content not exceeding 2% of the total weight.

4.  Big K Instant Lighting Fire Logs, manufactured by Allspan BV at Macroweg 4, 5804 CL Venray, the Netherlands, which—

(a)comprise slack wax (as to approximately 58 to 59% of the total weight) and hardwood sawdust (as to approximately 41 to 42% of the total weight);

(b)were manufactured from those constituents by a process of heat treatment and extrusion;

(c)are firelogs approximately 235 millimetres in length and 80 millimetres in depth, with grooves along their faces;

(d)have an average weight of 1.1 kilograms per firelog; and

(e)have a sulphur content not exceeding 0.1% of the total weight.

5.  Big K Restaurant Grade Charcoal, manufactured by Big K Products UK Limited at Parque Industrial Alvear, 2126 Alvear, Provincia de Santa Fe, Argentina which—

(a)comprise pyrolised white quebracho wood;

(b)were manufactured using a kiln pyrolysis process at approximately 450°C;

(c)are unmarked charcoal pieces of between 30mm and 150mm; and

(d)have a sulphur content not exceeding 2 per cent of the total weight.

6.  Black Diamond Gem briquettes, manufactured by Coal Products Limited at Immingham Briquetting Works, Immingham, North East Lincolnshire, which—

(a)comprise anthracite duff (as to 20 to 30% of the total weight), petroleum coke (as to 40 to 45% of the total weight), bituminous coal (as to 12 to 22% of the total weight) and molasses and phosphoric acid binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at about 300°C;

(c)are pillow-shaped briquettes marked with two parallel indented lines running latitudinally around the briquette;

(d)have an average weight of 160 grams per briquette; and

(e)have a sulphur content not exceeding 1.5% of the total weight.

7.  Bord na Móna Firelogs, manufactured by Bord na Móna Fuels Limited, Newbridge, County Kildare, Republic of Ireland, which—

(a)comprise slack wax (as to approximately 55% of the total weight) and hardwood sawdust (as to approximately 45% of the total weight);

(b)were manufactured from those constituents by a process of heat treatment and extrusion;

(c)are firelogs approximately 255 millimetres in length and 75 millimetres in diameter, with grooves along one longitudinal face;

(d)have an average weight of 1.3 kilograms per firelog; and

(e)have a sulphur content not exceeding 0.1% of the total weight.

8.  Bord na Móna Firepak (also marketed as Arigna Special coal briquettes), manufactured by Bord na Móna Fuels Limited, Newbridge, County Kildare, Republic of Ireland, which—

(a)comprise anthracite (as to approximately 50% of the total weight), petroleum coke (as to approximately 20 to 40% of the total weight), bituminous coal (as to approximately 10 to 30% of the total weight) and starch based binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment;

(c)are unmarked pillow-shaped briquettes;

(d)have an average weight of 50 grams per briquette; and

(e)have a sulphur content not exceeding 1.5% of the total weight.

9.  Briteflame briquettes, manufactured by Maxibrite Limited at Mwyndy Industrial Estate, Llantrisant, Mid Glamorgan, which—

(a)comprise 10 to 15% bituminous coal, 10 to 15% petroleum coke, 70 to 80% anthracite duff and starch binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at about 260°C;

(c)are unmarked pillow-shaped briquettes;

(d)have an average weight of 140 grams per briquette; and

(e)have a sulphur content not exceeding 1.9% sulphur on a dry basis.

10.  Briteheat briquettes (also known as Stoveheat Premium briquettes), manufactured by Coal Products Limited at Immingham Briquetting Works, North East Lincolnshire, which—

(a)comprise anthracite (as to approximately 60 to 85% of the total weight), petroleum coke (up to approximately 30% of the total weight), bituminous coal (up to approximately 15% of the total weight) and a molasses and phosphoric acid binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at about 300°C;

(c)are cushion-shaped briquettes with an indented line running longitudinally around the briquette;

(d)have an average weight of 30 grams per briquette; and

(e)have a sulphur content not exceeding 2% of the total weight.

11.  Briteheat Plus briquettes manufactured by Coal Products Limited at Immingham Briquetting works, Immingham, North East Lincolnshire, which—

(a)comprise anthracite duff (as to approximately 75% to 95% of the total weight), petroleum coke (up to approximately 20% of the total weight) and an organic binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll pressing;

(c)are unmarked pillow shaped briquettes;

(d)have an average weight of 80 grams per briquette; and

(e)have a sulphur content not exceeding 2% of the total weight.

12.  Bryant and May Firelogs, manufactured by Swedish Match at Kostenetz, Bulgaria, which—

(a)comprise paraffin wax (as to approximately 50% of the total weight), ground poplar wood (as to approximately 25% of the total weight), wheatflour (as to approximately 15% of the total weight), ignitable solids dispersed in gelled paraffin wax (as to approximately 1% of the total weight) and water, swelling agents and preservative (as to the remaining weight);

(b)were manufactured from those constituents by a process involving extrusion;

(c)have a quadrant shaped cross section with a radius of approximately 80 millimetres, a length of approximately 265 millimetres and an ignition strip along one edge;

(d)have an approximate weight of 1.15 kilograms per firelog; and

(e)have a sulphur content not exceeding 0.1% of the total weight.

13.  Charglow briquettes, manufactured by Polchar Spolka z ograniczona odpowiedzialnoscia, Ulica Kuznicka 1, Police, Zachodniepomorskie, Poland, which—

(a)comprise bituminous coal char (as to approximately 45 to 95% of the total weight), anthracite (as to approximately 0 to 20% of the total weight), petroleum coke (as to approximately 0 to 20% of the total weight), bituminous coal (as to approximately 0 to 10% of the total weight) and an organic binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at about 110°C;

(c)are unmarked pillow-shaped briquettes;

(d)have an average weight of 100 grams per briquette; and

(e)have a sulphur content not exceeding 1.5% of the total weight.

14.  Coalite manufactured by Coalite Products Limited at Bolsover, near Chesterfield, Derbyshire and at Grimethorpe, South Yorkshire using a low temperature carbonisation process.

15.  Coke manufactured by—

(a)Coal Products Limited at Cwm Coking Works, Llantwit Fardre, Pontypridd, Rhondda Cynon Taff, and sold as “Sunbrite”;

(b)Monckton Coke & Chemical Company Limited at Royston, near Barnsley, South Yorkshire, and sold as “Sunbrite” or “Monckton Boiler Beans”;

(c)Corus UK Limited at Teesside Works, Redcar and sold as “Redcar Coke Nuts (Doubles)”; and

(d)Coal Products Limited at Cwm Coking Works, Llantwit Fardre, Pontypridd, Rhondda Cynon Taff and sold as “Cwm Coke Doubles”.

16.  Cosycoke (also marketed as Lionheart Crusader or Sunbrite Plus), manufactured by Monckton Coke & Chemical Company Limited at Royston, near Barnsley, South Yorkshire, and Aimcor Supercoke (also marketed as Supercoke), manufactured by M & G Fuels Limited at Hartlepool Docks, Hartlepool, which in each case—

(a)comprise sized hard coke (as to approximately 45 to 65% of the total weight) and sized petroleum coke (as to the remaining weight);

(b)were manufactured from those constituents by blending;

(c)are unmarked random shapes; and

(d)have a sulphur content not exceeding 2% of the total weight.

17.  Dragonglow briquettes, manufactured by Tower Colliery Limited at Aberdare, Mid Glamorgan, South Wales, which—

(a)comprise tower duff (as to approximately 95% of the total weight) and a resin based binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving cold cure roll pressing;

(c)are unmarked pillow-shape briquettes;

(d)have an average weight of 100 grams per briquette; and

(e)have a sulphur content not exceeding 1% of the total weight.

18.  Dragonbrite briquettes, manufactured by Tower Colliery Limited at Aberdare, Mid Glamorgan, South Wales, which—

(a)comprise tower duff (as to approximately 95% of the total weight) and a resin based binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving cold cure roll pressing;

(c)are pillow-shape briquettes marked with the letter “T” on one side;

(d)have an average weight of 50 grams per briquette; and

(e)have a sulphur content not exceeding 1% of the total weight.

19.  Duraflame Firelogs, manufactured by Paramelt BV, Costerstraat 18, PO Box 86, 1700 AB Heerhugowaard, the Netherlands, which—

(a)comprise mineral-based petroleum wax (as to approximately 55% of the total weight) and ground hardwood fibre (as to approximately 45% of the total weight);

(b)were manufactured from those constituents by a process of heat treatment and extrusion;

(c)are firelogs approximately 320 millimetres in length, 90 millimetres high and 85 millimetres wide;

(d)have an average weight of 1.45 kilograms per firelog; and

(e)have a sulphur content not exceeding 0.1% of the total weight.

20.  Ecoal briquettes (also marketed as Homefire Ecoal briquettes), manufactured by Coal Products Limited at Immingham Briquetting Works, Immingham, North East Lincolnshire, which—

(a)comprise anthracite fines (as to approximately 40 to 65% of the total weight), petroleum coke (as to approximately 20 to 40% of the total weight), char (as to approximately 0 to 10% of the total weight), bituminous coal (as to approximately 0 to 20% of the total weight), biomass (as to approximately 5 to 20% of the total weight) and molasses and phosphoric acid as binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing;

(c)are unmarked hexagonal briquettes;

(d)have an average weight of 125 grams per briquette; and

(e)have a sulphur content not exceeding 2% of the total weight.

21.  Ecobrite briquettes, manufactured by Arigna Fuels Limited at Arigna, Carrick-on-Shannon, County Roscommon, Republic of Ireland, which—

(a)comprise anthracite fines (as to approximately 96% of the total weight) and starch as binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at about 250°C;

(c)are unmarked pillow-shaped briquettes in two sizes;

(d)have an average weight per briquette of 37 grams in the case of the smaller size and 48 grams in the case of the larger size; and

(e)have a sulphur content not exceeding 1.5% of the total weight.

22.  EDF fuel Briquettes manufactured by TheGreenFactory at the Laboratoire de Chimie Agro-industrielle UMR 1010 INRA/INP-ENSIACET AGROMAT, Site de l’ENIT 47, Avenue D’Azereiz, -BP 1629 65016 Tarbes Cedex, France, which—

(a)comprise approximately 100 grams of unprocessed Miscanthus (as to approximately 45% of the total weight), approximately 95 grams of Copra ester (as to approximately 43% of the total weight) and approximately 25 grams of a binder produced from Miscanthus (processed with calcium oxide as to approximately 0.5% of the total weight) as to the remaining weight;

(b)are manufactured from those constituents by a process involving Miscanthus processing, mixing, hot pressing and soaking in an ester bath;

(c)are unmarked cylinder shaped briquettes of 120mm height and 60mm diameter with a star shaped hole running centrally through the longer length of the briquette;

(d)have an average weight of 220 grams per briquette; and

(e)have a sulphur content not exceeding 2% of the total weight.

23.  Excel+ briquettes, manufactured by Oxbow Coal B.V. at Newfield works, Bishop Auckland, County Durham, which—

(a)comprise 65% to 70% petroleum coke and 25% anthracite (both by weight) together with a cold setting resin binder, hardener and low temperature stabiliser as to the remaining weight;

(b)are produced at ambient temperature by a process involving roll-pressing and cold curing;

(c)are unmarked square pillow shaped briquettes;

(d)have an average weight per briquette of 100 grams; and

(e)have a sulphur content not exceeding 1.9% of the total weight.

24.  Extracite briquettes, manufactured by Sophia-Jacoba Handelsgesellschaft mbH at Hückelhoven, Germany, which—

(a)comprise anthracite duff (as to approximately 95.5% of the total weight) and ammonium lignosulphonate lye as binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at about 260°C;

(c)are cushion-shaped briquettes with a silvery appearance and are marked with the letters “S” and “J”;

(d)have an average weight of 40 grams per briquette; and

(e)have a sulphur content of approximately 1.2% of the total weight.

25.  Fireglo briquettes, manufactured by Les Combustibles de Normandie at Caen, France, and by La Société Rouennaise de Defumage at Rouen, France, which—

(a)comprise washed Welsh duffs (as to approximately 92% of the total weight) and coal pitch binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at about 330°C;

(c)are ovoids which have three lines on one side and are smooth on the other side;

(d)have an average weight of 30 grams per briquette; and

(e)have a sulphur content not exceeding 0.8% of the total weight.

26.  Homefire briquettes, manufactured by Coal Products Limited at Immingham Briquetting Works, Immingham, North East Lincolnshire, which—

(a)comprise anthracite fines (as to approximately 40 to 70% of the total weight), petroleum coke (as to approximately 20 to 45% of the total weight), char (as to approximately 0 to 10% of the total weight), bituminous coal (as to approximately 5 to 30% of the total weight) and an organic binder or a molasses and phosphoric acid binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing;

(c)have a volatile matter content in the finished briquette of neither less than 9 nor more than 15% of the total weight on a dry basis;

(d)are unmarked hexagonal briquettes;

(e)have an average weight of 140 grams per briquette; and

(f)have a sulphur content not exceeding 2% of the total weight.

27.  Homefire Fire Logs, manufactured by De Lange BV, Rustenburgerweg 3, 1646 WJ Ursem, the Netherlands, which—

(a)comprise slackwax (as to approximately 50% of the total weight) and sawdust (as to approximately 50% of the total weight);

(b)were manufactured from those constituents by a process of heat treatment and extrusion;

(c)are firelogs approximately 280 millimetres in length and 75 millimetres x 75 millimetres with a single groove running along each of the four 280 millimetre length faces;

(d)have an average weight of 1.1 kilograms per firelog; and

(e)have a sulphur content not exceeding 0.2% of the total weight.

28.  Homefire ovals, manufactured by Coal Products Limited at Immingham Briquetting Works, Immingham, North East Lincolnshire, which—

(a)comprise anthracite duff (as to approximately 57% of the total weight), petroleum coke (as to approximately 17% of the total weight), bituminous coal (as to approximately 13% of the total weight) and molasses and phosphoric acid as binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at about 300°C;

(c)are pillow-shaped briquettes with two parallel indented lines running latitudinally around the briquette;

(d)have an average weight of 135 grams per briquette; and

(e)have a sulphur content not exceeding 2% of the total weight.

29.  Homefire Ovals (R), manufactured by Coal Products Limited at Immingham Briquetting Works, Immingham, North East Lincolnshire, which—

(a)comprise anthracite fines (as to approximately 50 to 75% of the total weight), petroleum coke (as to approximately 20 to 45% of the total weight), bituminous coal (as to approximately 5 to 17% of the total weight) and an organic binder (as to the remaining weight);

(b)were manufactured from those constituents by process involving roll-pressing;

(c)are pillow-shaped briquettes with two parallel indented lines running latitudinally around the briquette;

(d)have an average weight of 130 grams per briquette; and

(e)have a sulphur content not exceeding 2% of the total weight.

30.  Island Lump and Island Nuts, manufactured by Unocal Refinery, California, the United States of America, which—

(a)comprise petroleum coke;

(b)were manufactured from the petroleum coke by a process involving heat treatment and steam injection;

(c)are unmarked random shapes;

(d)have an average weight of 80 grams (per briquette of Island Lump) or 30 grams (per briquette of Island Nuts); and

(e)have a sulphur content not exceeding 2% of the total weight.

31.  Jewel briquettes, manufactured by Eldon Colliery Limited at Newfield Works, Bishop Auckland, County Durham, which—

(a)comprise anthracite (as to approximately 30 to 50% of the total weight), Long Beach petroleum coke (as to approximately 50 to 70% of the total weight) and a carbohydrate binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at about 150°C;

(c)are unmarked pillow-shaped briquettes;

(d)have an average weight of 33 grams per briquette; and

(e)have a sulphur content not exceeding 1.5% of the total weight.

32.  La Hacienda Easy Logs, manufactured by Allspan BV at Macroweg 4, 5804 CL Venray, the Netherlands, which meet the conditions specified for Big K Instant Lighting Fire Logs at paragraph 4.

33.  Long Beach Lump nuts (otherwise known as LBL nuts), manufactured by Aimcor Carbon Corporation at Long Beach, California, the United States of America, or manufactured by Oxbow Carbon & Minerals LLC, 330 Golden Shore, Suite 210, Long Beach, California 90802, the United States of America, which—

(a)comprise petroleum coke (as to approximately 85 to 100% of the total weight), limestone (as to approximately 0 to 10% of the total weight) and coal tar pitch (as to the remaining weight);

(b)were manufactured from those constituents by a process involving heat treatment and steam injection;

(c)are unmarked random shapes; and

(d)have a sulphur content not exceeding 2% of the total weight.

34.  Maxibrite briquettes, manufactured by Maxibrite Limited at Llantrisant, Rhondda Cynon Taff, which—

(a)comprise anthracite fines (as to approximately 84% of the total weight), petroleum coke (as to approximately 12% of the total weight) and starch as binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at 250°C;

(c)are cushion-shaped briquettes marked with the letter “M”;

(d)have an average weight of 35 grams per briquette; and

(e)have a sulphur content not exceeding 2% of the total weight.

35.  Multiheat briquettes, manufactured by Coal Products Limited at Immingham Briquetting Works, Immingham, North East Lincolnshire, which—

(a)comprise anthracite (as to approximately 60 to 80% of the total weight), petroleum coke (as to approximately 10 to 30% of the total weight) and a molasses and phosphoric acid binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at about 300°C;

(c)are unmarked pillow-shaped briquettes;

(d)have average weights per briquette of either 55 or 80 grams; and

(e)have a sulphur content not exceeding 2% of the total weight.

36.  Newflame briquettes, manufactured by Maxibrite Limited at Llantrisant, Rhondda Cynon Taff, which—

(a)comprise anthracite fines (as to approximately 84% of the total weight), petroleum coke (as to approximately 12% of the total weight) and starch as binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at about 260°C;

(c)are unmarked pillow-shaped briquettes;

(d)have an average weight of 78 grams per briquette; and

(e)have a sulphur content not exceeding 2% of the total weight.

37.  Newflame Plus briquettes, manufactured by Maxibrite Limited at Mwyndy Industrial Estate, Llantrisant, Mid Glamorgan, which—

(a)comprise 10 to 15 per cent bituminous coal, 10-15 percent petroleum coke and anthracite duff and starch binder as to the remaining weight;

(b)were manufactured from those constituents by a process involving a roll-pressing and heat treatment at about 260°C;

(c)are unmarked pillow-shaped briquettes with approximate maximum dimensions 68mm, 63mm and 38mm;

(d)have an average weight of 110 grams per briquette; and

(e)have a sulphur content not exceeding 1.9 per cent on a dry basis.

38.  Newheat briquettes, manufactured for Oxbow Coal B.V at Newfield works, Bishop Auckland, County Durham, which—

(a)comprise 60 to 65% petroleum coke and 30 to 35% anthracite (both by weight) together with a cold setting resin binder, hardener and low temperature stabiliser as to the remaining weight;

(b)are produced at ambient temperature by a process involving roll-pressing and cold curing;

(c)are unmarked pillow shaped oval briquettes;

(d)have an average weight of 100 grams per briquette; and

(e)have a sulphur content o not exceeding 1.9% of the total weight.

39.  Optima Fire Logs, manufactured by Allspan BV at Macroweg 4, 5804 CL Venray, the Netherlands, which meet the conditions specified for Big K Instant Lighting Fire Logs at paragraph 4.

40.  Phurnacite briquettes, manufactured by Coal Products Limited at Immingham Briquetting Works, Immingham, North East Lincolnshire, which—

(a)comprise anthracite duff (as to approximately 65 to 85% of the total weight), petroleum coke (as to approximately 20% of the total weight) and a molasses and phosphoric acid binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at about 300°C;

(c)are ovoid-shaped briquettes with two parallel indented lines running longitudinally around the briquette;

(d)have an average weight of 40 grams per briquette; and

(e)have a sulphur content not exceeding 2% of the total weight.

41.  Pyrobloc Fire Logs, manufactured by Allspan BV at Macroweg 4, 5804 CL Venray, the Netherlands, which—

(a)comprise slack wax (as to approximately 58 to 59% of the total weight) and hardwood sawdust (as to approximately 41 to 42% of the total weight);

(b)were manufactured from those constituents by a process of heat treatment and extrusion;

(c)are firelogs approximately 265 millimetres in length and 80 millimetres in depth, with grooves along their faces;

(d)have an average weight of 1.3 kilograms per firelog; and

(e)have a sulphur content not exceeding 0.1% of the total weight.

42.  Safelight Firelogs, manufactured by Advanced Natural Fuels Limited, at Pocklington, East Riding of Yorkshire, which—

(a)comprise woodchip (as to approximately 40 to 55% of the total weight) and Palm Wax binder (as to approximately 45 to 60% of the total weight);

(b)were manufactured from those constituents by a process involving pressing of the mixed ingredients at about 40°C to 50°C;

(c)are rectangular hard finish firelogs with two deep overlapping slots in the top surface and a single continuous slot in the base surface;

(d)have an average weight of 1.8 kilograms per firelog; and

(e)have a sulphur content not exceeding 2% of the total weight.

43.  Sovereign briquettes, manufactured by Monckton Coke & Chemical Company Limited at Royston, near Barnsley, South Yorkshire, which—

(a)comprise anthracite (as to approximately 75% of the total weight), coal and reactive coke (as to approximately 21% of the total weight) and cold-setting resin binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving extrusion;

(c)are unmarked hexagonal briquettes;

(d)have an average weight of 130 grams per briquette; and

(e)have a sulphur content not exceeding 2% of the total weight.

44.  Supabrite Coke Doubles, manufactured by HJ Banks and Company Limited at Inkerman Road Depot, Tow Law, County Durham, which—

(a)comprise metallurgical coke (as to approximately 40 to 60% of the total weight) and petroleum coke (as to the remaining weight);

(b)were manufactured from those constituents by a process involving blending and screening;

(c)are unmarked random shapes; and

(d)have a sulphur content not exceeding 1.95% of the total weight.

45.  Supacite briquettes, manufactured by Maxibrite Limited at Llantrisant, Rhondda Cynon Taff, which—

(a)comprise anthracite fines (as to approximately 84% of the total weight), petroleum coke (as to approximately 12% of the total weight) and starch as binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at about 240°C;

(c)are unmarked ovoids;

(d)have an average weight of 45 grams per briquette; and

(e)have a sulphur content not exceeding 2% of the total weight.

46.  Supertherm briquettes, manufactured by Coal Products Limited at Immingham Briquetting Works, Immingham, North East Lincolnshire, which—

(a)comprise a blend (in the proportion of 19:1 by weight) of anthracite and medium volatile coal (as to approximately 93% of the total weight) and cold-setting organic binder or a molasses and phosphoric acid binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing;

(c)are unmarked ovoids;

(d)have an average weight of 160 grams per briquette; and

(e)have a sulphur content not exceeding 1.5% of the total weight.

47.  Supertherm II briquettes, manufactured by Coal Products Limited at Immingham Briquetting Works, Immingham, North East Lincolnshire, which—

(a)comprise anthracite (as to approximately 36 to 51% of the total weight), petroleum coke (as to approximately 40 to 55% of the total weight) and an organic binder or a molasses and phosphoric acid binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing;

(c)are unmarked ovoids;

(d)have an average weight of 140 grams per briquette; and

(e)have a sulphur content not exceeding 2% of the total weight.

48.  Taybrite briquettes (otherwise known as Surefire briquettes), manufactured by Coal Products Limited at Immingham Briquetting Works, Immingham, North East Lincolnshire, which—

(a)comprise anthracite (as to approximately 60 to 80% of the total weight), petroleum coke (as to approximately 10 to 30% of the total weight) and a molasses and phosphoric acid binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at about 300°C;

(c)are pillow-shaped briquettes marked with a single indented line running longitudinally along each face, off-set from its counterpart by 10 millimetres or unmarked;

(d)have an average weight of 80 grams per briquette; and

(e)have a sulphur content not exceeding 2% of the total weight.

49.  Therma Briquettes, manufactured by Maxibrite Limited at Llantrisant, Rhondda Cynon Taff, which—

(a)comprise anthracite fines (as to approximately 84% of the total weight), petroleum coke (as to approximately 12% of the total weight) and starch as binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing and heat treatment at 250°C;

(c)are oval/tear shaped briquettes with a line through the centre;

(d)have an average weight of 26 grams per briquette; and

(e)have a sulphur content not exceeding 2% of the total weight.

50.  Thermac briquettes, manufactured by Coal Products Limited at Immingham Briquetting Works, Immingham, North East Lincolnshire, which—

(a)comprise anthracite (as to approximately 90% of the total weight) and cold-setting organic binder (as to the remaining weight);

(b)were manufactured from those constituents by a process involving roll-pressing;

(c)are unmarked pillow-shaped briquettes;

(d)have an average weight of 48 grams per briquette; and

(e)have a sulphur content not exceeding 1.5% of the total weight.

51.  Tiger Tim Firelogs, manufactured by De Lange BV, Rustenburgerweg 3, 1646 WJ Ursem, the Netherlands, which—

(a)comprise slackwax (as to approximately 50% of the total weight) and sawdust (as to approximately 50% of the total weight);

(b)were manufactured from those constituents by a process of heat treatment and extrusion;

(c)are firelogs approximately 280 millimetres in length and 75 millimetres x 75 millimetres with a single groove running along each of the four 280 millimetre length faces;

(d)have an average weight of 1.1 kilograms per firelog; and

(e)have a sulphur content not exceeding 0.2% of the total weight.

52.  Unicite, manufactured by DJ Davies Fuels Ltd at Blaenau Fuel Depot, Ammanford, Carmarthenshire, or manufactured by AI Simson at Cabby Latch, Logie by Kirriemuir, Angus, which—

(a)is a mixture of the following separate fuels—

(i)anthracite large nuts, and

(ii)Union briquettes of the description in sub-paragraph (c) manufactured by RWE Power A.G. at Cologne, Germany (as to no more than approximately 40 to 42% of Unicite’s total weight);

(b)has an overall sulphur content not exceeding 0.5% of the total weight; and

(c)in so far as it is constituted by the Union briquettes referred to in sub-paragraph (a)(ii), must consist of compressed lignite with each briquette measuring approximately 75 millimetres wide, 60 millimetres high and 55 millimetres thick.

53.  ZIP Cracklelog firelogs, ZIP Crackle-log firelogs and ZIP Crackling Log firelogs, manufactured by Allspan BV, Macroweg 4, 5804 CL Venray, the Netherlands, which—

(a)comprise slack wax (as to approximately 55% of the total weight), hardwood sawdust (as to approximately 42% of the total weight) and crackle seeds (as to approximately 3.2% of the total weight);

(b)were manufactured from those constituents by a process of heat treatment and extrusion;

(c)are firelogs approximately 235 millimetres in length and 80 millimetres in diameter, with grooves along the faces;

(d)have an average weight of 1.1 kilograms per firelog; and

(e)have a sulphur content not exceeding 0.1% of the total weight.

54.  ZIP Firelogs, manufactured by Allspan BV, Macroweg 4, 5804 CL Venray, the Netherlands, which—

(a)comprise slack wax (as to approximately 58 to 59% of the total weight) and hardwood sawdust (as to approximately 41 to 42% of the total weight);

(b)were manufactured from those constituents by a process of heat treatment and extrusion;

(c)are firelogs approximately 265 millimetres in length and 80 millimetres in depth, with grooves along the faces;

(d)have an average weight of 1.3 kilograms per firelog; and

(e)have a sulphur content not exceeding 0.1% of the total weight.

55.  ZIP Firelogs, manufactured by Woodflame Moerdijk BV, Appolloweg 4, Harbour No: M189A, 4782 SB Moerdijk, the Netherlands, which—

(a)comprise slack wax (as to approximately 55 to 60% of the total weight) and hardwood sawdust (as to approximately 40 to 45% of the total weight);

(b)were manufactured from those constituents by a process of heat treatment and extrusion;

(c)are firelogs approximately 255 millimetres in length and 75 millimetres in diameter, with grooves along one longitudinal face;

(d)have an average weight of 1.3 kilograms per firelog; and

(e)have a sulphur content not exceeding 0.1% of the total weight.

56.  Zip Firelogs, manufactured by Allspan BV at Macroweg 4, 5804 CL Venray, the Netherlands, which meet the conditions specified for Big K Instant Lighting Fire Logs at paragraph 4.

Regulation 3

SCHEDULE 2Revocations

Regulations revokedReference
The Smoke Control Areas (Authorised Fuels) (England) Regulations 2008SI 2008/514
The Smoke Control Areas (Authorised Fuels) (England) (Amendment) Regulations 2008SI 2008/2342
The Smoke Control Areas (Authorised Fuels) (England) (Amendment) Regulations 2009SI 2009/2191
The Smoke Control Areas (Authorised Fuels) (England) (Amendment) Regulations 2010SI 2010/576
The Smoke Control Areas (Authorised Fuels) (England) (Amendment) Regulations 2011SI 2011/715
The Smoke Control Areas (Authorised Fuels) (England) (Amendment) (No 2) Regulations 2011SI 2011/2105

EXPLANATORY NOTE

(This note is not part of the Regulations)

These Regulations consolidate six sets of regulations which declare fuels to be authorised fuels for the purposes of Part III of the Clean Air Act 1993. Those regulations are SI 2008/514, SI 2008/2342, SI 2009/2191, SI 2010/576, SI 2011/715 and SI 2011/2105. Two additional fuels are authorised (Excel+ briquettes and Newheat briquettes). Briteheat and Stoveheat Premium briquettes are two names for the same product and they are therefore listed together.

A full impact assessment has not been produced as no impact on the private, voluntary or public sectors foreseen.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made):The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enactedversion that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources