The Measuring Instruments (Liquid Fuel delivered from Road Tankers) Regulations 2006

Interpretation

2.—(1) In these Regulations—

“accuracy class” means the classification of a meter measuring system determined in accordance with paragraph 19 of Schedule 1;

“authorised representative” means a person who is established in a member State and is authorised by a manufacturer, in writing, to act on his behalf;

“CE marking” means the CE marking referred to in regulation 12;

“the Commission” means the European Commission;

“compliance notice” means a notice served in accordance with regulation 19(2);

“conformity assessment procedure” means any procedure referred to in regulation 6;

“the Directive” means Directive 2004/22/EC of the European Parliament and of the Council of 31st March 2004 on measuring instruments(1);

“disqualification mark” means a mark or sticker the design of which is published by the Secretary of State and which is affixed to a meter measuring system in accordance with regulation 22;

“enforcement authority” means any person who is, pursuant to regulation 18, authorised to enforce these Regulations;

“enforcement notice” means a notice served in accordance with regulation 20(2);

“enforcement officer” means—

(a)

an inspector; or

(b)

a person appointed by the Secretary of State to act on his behalf to enforce Part II of these Regulations;

“essential requirements” means the requirements set out in Schedule 1;

“flowrate range” means the range between the minimum flowrate and the maximum flowrate;

“harmonised standard” means a technical specification adopted by the European Committee for Standardisation (CEN), the European Committee for Electrotechnical Standardisation (CENELEC) or the European Telecommunications Standards Institute (ETSI) or jointly by two or all of these organisations, at the request of the Commission pursuant to Directive 98/34/EC of the European Parliament and of the Council of 22nd June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations and of rules on Information Society Services(2), as amended by Directive 98/48/EC(3), and prepared in accordance with the General Guidelines agreed between the Commission and one or more of CEN, CENELEC and ETSI;

“instrument” has the same meaning as meter measuring system;

“in writing” includes text that is—

(a)

transmitted by electronic means;

(b)

received in legible form; and

(c)

capable of being used for subsequent reference;

“M marking” means the M marking referred to in regulation 12;

“manufacturer” means a person responsible for the conformity of a meter measuring system with these Regulations with a view to either placing it on the market under his own name or putting it into use for his own purposes, or both;

“maximum permissible error” means, in the case of a meter measuring system—

(a)

when it is used for trade, the limit of error determined in accordance with regulation 15; and

(b)

when it is placed on the market or put into use, the limit of error determined in accordance with paragraph 16 of Schedule 1;

“meter” means equipment designed to measure continuously, memorise and display the quantity at metering conditions of liquid fuel flowing through the measurement transducer in a closed, fully charged circuit;

“meter measuring system” means a system that comprises the meter and all devices required to ensure correct measurement or intended to facilitate the measuring operations;

“minimum measured quantity” means the smallest quantity of liquid fuel for which the measurement is metrologically acceptable for the meter measuring system;

“normative document” means a document containing technical specifications adopted by the Organisation Internationale de Métrologie Légale, subject to the procedure stipulated in Article 16.1, the reference of which is published by the Commission in the Official Journal of the European Union pursuant to Article 16.1(b);

“notified body” means—

(a)

the Secretary of State; or

(b)

a United Kingdom notified body; and

(c)

for the purposes of regulations 4(1)(c), 20(1)(b), 22(1)(c) and 25(6), a person designated by another member State,

who has been notified to the Commission and the other member States pursuant to Article 11.1;

“notified body criteria” means the criteria set out in Part 1 of Schedule 2;

“place on the market” means making available for the first time in a member State an instrument intended for an end user, whether for reward or free of charge;

“put into use” means the first use of an instrument intended for the end user for the purposes for which it was intended;

“relevant national standard” means a standard applicable to an instrument—

(a)

implementing a harmonised standard that has been published in the Official Journal of the European Union C series; and

(b)

the reference of which is published—

(i)

in the United Kingdom by the Secretary of State; or

(ii)

in another member State by the competent authority pursuant to the third sub-paragraph of Article 13.1;

“relevant normative document” means a normative document applicable to an instrument, the reference of which is published—

(a)

in the United Kingdom by the Secretary of State; or

(b)

in another member State by the competent authority pursuant to the third sub-paragraph of Article 13.2;

“re-qualification mark” means a mark or sticker the design of which is published by the Secretary of State and which is affixed to a meter measuring system in accordance with regulation 23;

“road tanker” means a vehicle or trailer—

(a)

which contains or is intended to contain liquid fuel in a tank forming part of the vehicle; or

(b)

which carries on it a tank of a capacity exceeding 3 cubic metres which contains or is intended to contain liquid fuel,

other than the tank containing the fuel used to propel the vehicle or trailer;

“sealing device” means a seal or a plug; and

“United Kingdom notified body” means a person designated under regulation 7.

(2) Other expressions used in these Regulations have the same meanings as in the Weights and Measures Act 1985.

(3) In these Regulations, a reference to a member State includes Norway, Iceland and Liechtenstein(4).

(4) References in these Regulations to an Article, Annex or a part of an Annex are references to an Article, Annex or a part of an Annex to the Directive.

(1)

OJ No. L135, 30.4.04, p.1.

(2)

OJ No. L204, 21.7.98, p.37.

(3)

OJ No. L217, 5.8.98, p.18.

(4)

The application of the Directive was extended to the European Economic Area by Decision No. 31/2005 (OJ No. L198, 28.7.05, p.20).