Search Legislation

The Animal By-Products Regulations 2005

Changes over time for: PART II

 Help about opening options

Version Superseded: 23/03/2011

Alternative versions:

Status:

Point in time view as at 28/09/2005.

Changes to legislation:

There are currently no known outstanding effects for the The Animal By-Products Regulations 2005, PART II. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

PART IIU.K.METHODS FOR THE ISOLATION OF SALMONELLA

A. BACTERIOLOGICAL METHODU.K.

1.—(1) Tests shall be begun on receipt of the sample or on the first working day which allows this method to be completed. If the test is not begun on the day of receipt the sample shall be stored in a refrigerator until required. If the sample has been refrigerated it shall be removed from the refrigerator and stored at room temperature for at least four hours before the test is started.

(2) Tests shall be carried out in duplicate using two 25 gram portions of each sample submitted for testing.

Day oneU.K.

2.  On day one, each 25 gram sample shall be placed aseptically in a container containing 225 ml Buffered Peptone Water (BPW) and incubated at 37°C±1°C for 18 hours±2 hours.

Day twoU.K.

3.  On day two, 0.1 ml from the container of incubated BPW shall be inoculated into 10 ml Rappaports Vassiliadis broth (RV broth)(1) and incubated at 41.5°C±0.5°C for 24 hours ± 3 hours.

Day threeU.K.

4.  On day three, the RV broth shall be plated out on to two 90 millimetre plates of Brilliant Green Agar (BGA)(2) or on to one 90 millimetre plate of BGA and one 90 millimetre plate of Xylose Lysine Deoxycholate Agar (XLD)(3) using a 2.5 mm diameter loop. The plates shall be inoculated with a droplet taken from the edge of the surface of the fluid by drawing the loop over the whole of one plate in a zig zag pattern and continuing to the second plate without recharging the loop. The space between the loop streaks shall be 0.5 cm - 1.0 cm. The plates shall be incubated at 37°C ±27°C for 24 hours ± 3 hours.

5.  The residual RV broth shall be reincubated at 41.5°C±0.5°C for a further 24 hours.

Day fourU.K.

6.  On day four the plates shall be examined and a minimum of 3 colonies from each plate showing suspicion of Salmonella growth shall be subcultured -

(a)on to a blood agar plate;

(b)on to a MacConkey agar plate(4); and

(c)into biochemical media suitable for the identification of Salmonella.

These media shall be incubated at 37°C overnight.

7.  The reincubated both shall be plated out as described in paragraph 4.

Day fiveU.K.

8.  On day five the incubated composite media or equivalent shall be examined and the findings recorded, discarding cultures which are obviously not Salmonella. Slide serological tests shall be performed using Salmonella polyvalent “O” and polyvalent “H” (phase 1 and 2) agglutinating sera on selected suspect colonies collected from the blood agar or MacConkey plates. If reactions occur with one or both sera, the colonies shall be typed by slide serology. If requested in writing by the Secretary of State, the operator of the laboratory shall send a subculture to a Regional Veterinary Laboratory of the Veterinary Laboratories Agency of the Department for Environment, Food and Rural Affairs for further typing.

9.  The plates referred to in paragraph 7 shall be examined and further action taken as in paragraph 6 and 8.

B. ELECTRICAL CONDUCTANCE METHODU.K.

10.  Tests shall be begun on receipt of the sample or on the first working day which allows the following method to be completed. If the test is not begun on the day of receipt the sample shall be stored in a refrigerator until required. If the sample has been refrigerated it shall be stored at room temperature for at least four hours before the test is started.

Day oneU.K.

11.  On day one tests shall be carried out in duplicate using two 25 gram portions of each sample submitted for testing. Each 25 gram sample shall be placed aseptically in a sterile container containing 225 ml Buffered Peptone Water/Lysine/Glucose (BPW/L/G)(5) and incubated at 37°C for 18 hours.

Day twoU.K.

12.  On day two the incubated BPW/L/G shall be added to Selenite Cystine Trimethylamine-N-Oxide Dulcitol (SC/T/D)(6) and Lysine Decarboxylase Glucose (LD/G)(7) media in electrical conductance cells or wells. For cells or wells containing more than 5 ml medium 0.2 ml of the BPW/L/G shall be added and for cells or wells containing 5 ml or less medium 0.1 ml of the BPW/L/G shall be added. Cells or wells shall be connected to appropriate electrical conductance measuring equipment set to monitor and record changes in electrical conductance at 6 minute intervals over a 24 hour period. The temperature of cells and wells shall be kept at 37°C.

Day threeU.K.

13.  On day three, at the end of the 24 hour period, the information recorded by the conductance measuring equipment shall be analysed and interpreted using criteria defined by the manufacturers of the equipment. Where a well or cell is provisionally identified as being positive for Salmonella, the result shall be confirmed by subculturing the contents of the well or cell on to two 90 millimetre plates of BGA or on to one 90 millimetre plate of BGA and one 90 millimetre plate of Xylose Lysine Deoxycholate Agar (XLD) using a 2.5 mm diameter loop. The plates shall be inoculated with a droplet taken from the edge of the surface of the fluid by drawing the loop over the whole of one plate in a zig zag pattern and continuing to the second plate without recharging the loop. The space between the loop streaks shall be 0.5 cm - 1.0 cm. The plates shall be incubated at 37°C overnight.

Day fourU.K.

14.  On day four the plates shall be examined and a minimum of 3 colonies from each plate showing suspicion of Salmonella growth shall be subcultured -

(a)on to a blood agar plate;

(b)on to a MacConkey agar plate; and

(c)into biochemical media suitable for the identification of Salmonella.

These media shall be incubated at 37°C overnight.

Day fiveU.K.

15.  On day five the incubated composite media or equivalent shall be examined and the findings recorded, discarding cultures which are obviously not Salmonella. Slide serological tests shall be performed using Salmonella polyvalent “O” and polyvalent “H” (phase 1 and 2) agglutinating sera on selected suspect colonies collected from the blood agar or MacConkey plates. If reactions occur with one or both sera, the colonies shall be typed by slide serology. If requested in writing by the Secretary of State, the operator of the laboratory shall send a subculture to a Regional Veterinary Laboratory of the Veterinary Laboratories Agency of the Department for Environment, Food and Rural Affairs for further typing.

(1)

Rappaports Vassiliadis Broth—See Vassiliadis P, Pateraki E, Papaiconomou N, Papadkis J A, and Trichopoulos D (1976) Annales de Microbiologie (Institut Pasteur) 127B: 195-200. Elsevier, 23 rue Linois, 75724 Paris, Cedex 15, France.

(2)

Brilliant Green Agar—See Edel W and Kampelmacher E H (1969) Bulletin of World Health Organisation 41:297-306, World Health Organisation Distribution and Sales, CH-1211, Geneva 27, Switzerland (ISSN 0042-9686).

(3)

Xylose Lisene Deoxycholate Agar—See Taylor W I, (1965) American Journal of Clinical Pathology, 44:471-475, Lippincott and Raven, 227E Washington Street, Philadelphia PA 19106, USA.

(4)

MacConkey agar—See (1963) International Standards for Drinking Water, World Health Distribution and Sales, CH-1211, Geneva 27, Switzerland.

(5)

Buffered Peptone Water/Lysine/Glucose—See Ogden I D (1988) International Journal of Food Microbiology 7:287-297, Elsevier Science BV, PO Box 211, 1000 AE, Amsterdam, Netherlands (ISSN 0168-1695).

(6)

Selenite Cystine Trimethylamine-N-Oxide Dulcitol—See Easter, M C and Gibson, D M, (1985) Journal of Hygiene 94:245-262, Cambridge University Press, Cambridge.

(7)

Lysine Decarboxylase Glucose—See Ogden I D (1988) International Journal of Food Microbiology 7:287-297, Elsevier Science BV, PO Box 211, 1000 AE, Amsterdam, Netherlands (ISSN 0168-1695).

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources