Search Legislation

The Animal By-Products Regulations 2005

Changes over time for: PART I

 Help about opening options

Version Superseded: 23/03/2011

Alternative versions:

Status:

Point in time view as at 28/09/2005.

Changes to legislation:

There are currently no known outstanding effects for the The Animal By-Products Regulations 2005, PART I. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

PART IU.K.METHOD FOR THE ISOLATION OF CLOSTRIDIUM PERFRINGENS

Time of testingU.K.

1.  Tests shall be begun on receipt of the sample or on the first working day which allows this method to be completed. If the test is not begun on the day of receipt the sample shall be stored in a refrigerator at between 2°C and 8°C until required. If the sample has been refrigerated it shall be removed from the refrigerator and stored at room temperature for at least one hour before the test is started.

SamplesU.K.

2.  Tests shall be carried out using two 10 gram portions of each sample submitted for testing. Each 10 gram sample shall be placed aseptically in a sterile container containing 90 ml Clostridium perfringens diluent consisting of 0.1% peptone and 0.8% sodium chloride at a pH of 7 and mixed thoroughly until the sample is evenly suspended.

InoculationsU.K.

3.  For each portion of the sample 1 ml of solution shall be transferred to a sterile 90 mm petri dish (in duplicate), to which 15 ml of Shahidi - Ferguson agar (SF agar)(1) at a temperature of 47°C±1°C shall be added and immediately gently mixed by swirling the dish with 5 clockwise and 5 anticlockwise circular movements.

4.  Once the agar has set, each agar plate shall be overlaid with a further 10 ml SF agar at a temperature of 47°C±1°C. Once the overlay has set and with the plate lids uppermost the plates shall be incubated anaerobically at 37°C±1°C for 20 hours±2 hours.

Samples with colonies of Clostridium perfringensU.K.

5.  After incubation each set of duplicate plates shall be examined for colonies characteristic of Clostridium perfringens (black). The sample provisionally fails if any colonies characteristic of Clostridium perfringens are present, in which case the following procedure shall be followed to establish whether or not the colonies are Clostridium perfringens.

6.  In the case of each plate, 10 characteristic colonies of Clostridium perfringens shall be subcultured on to a further SF agar plate. If there are less than 10 colonies on the plate, all characteristic colonies shall be subcultured on to the further plate. The plates shall be incubated anaerobically at 37°C±1°C for 20 hours±2 hours.

7.  If the surface area of the plates is overgrown and it is not possible to select well isolated characteristic colonies, 10 suspect colonies shall be subcultured on to duplicate SF agar plates and incubated anaerobically at 37°C±1°C for 20 hours±2 hours.

8.  One characteristic colony from each plate shall be subcultured on to SF agar and incubated anaerobically at 37°C±1°C for 20 hours±2 hours.

Subcultured coloniesU.K.

9.  After incubation each plate shall be examined for colonies characteristic of Clostridium perfringens. All colonies characteristic of Clostridium perfringens shall be—

(a)stab inoculated into motility nitrate medium(2); and

(b)inoculated into either lactose gelatin medium(3) or charcoal gelatin discs(4);

and incubated anaerobically at 37°C±1°C for 20 hours±2 hours.

MotilityU.K.

10.  The motility nitrate medium shall be examined for the type of growth along the stab line. If there is evidence of diffuse growth out into the medium away from the stab line, the bacteria shall be considered to be motile.

Reduction of nitrate to nitriteU.K.

11.  After examination of the motility nitrate medium, 0.2 ml to 0.5 ml of nitrite detection reagent shall be added to it. The formation of a red colour confirms that the bacteria have reduced nitrate to nitrite. Cultures that show a faint reaction (i.e. a pink colour) should be discounted. If no red colour is formed within 15 minutes, a small amount of zinc dust shall be added and the plate allowed to stand for 15 minutes. If a red colour is formed after the addition of zinc dust no reduction of nitrate to nitrite has taken place.

Production of gas and acid from lactose and liquefaction of gelatinU.K.

12.  The lactose gelatin medium shall be examined for the presence of small gas bubbles in the medium.

13.  The lactose gelatin medium shall be examined for colour. A yellow colour indicates fermentation of lactose.

14.  The lactose gelatin medium shall be chilled for one hour at 2 - 8°C and then checked to see if the gelatin has liquefied. If the medium has solidified it shall be re-incubated anaerobically for a further 18 - 24 hours, the medium chilled for a further one hour at 2 - 8°C and again checked to see if the gelatin has liquefied.

15.  The presence of Clostridium perfringens shall be determined on the basis of the results from paragraphs 10 to 14. Bacteria which produce black colonies on SF agar, are non-motile, reduce nitrate to nitrite, produce gas and acid from lactose and liquefy gelatin within 48 hours shall be considered to be Clostridium perfringens.

Control TestsU.K.

16.  Control tests shall be carried out each day that a test is initiated using—

(a)Clostridium perfringens no more than seven days old at the time of use;

(b)Escherichia coli NCTC 10418(5) or equivalent not more than seven days old at the time of use; and

(c)processed animal protein or compost or digestion residue which is free of Clostridium perfringens.

17.  10 gram portions of the rendered animal protein shall be placed aseptically in each of two sterile containers containing 90 ml Buffered Peptone Water (BPW)(6) and mixed thoroughly until the samples are evenly suspended.

18.  One colony of Clostridium perfringens shall be placed in 10 ml BPW and mixed to form an even suspension. 0.1 ml of the suspension shall be added to the suspension in the preceding paragraph. This shall be repeated for Escherichia coli.

19.  These are then treated and examined in the same way as test samples. If no typical colonies are formed then that day’s testing shall be invalid and shall be repeated.

(1)

Shahidi-Ferguson agar- See Shahidi, S. A. and Ferguson, A. R. (1971) Applied Microbiology 21:500-506.American Society for Microbiology, 1913 1 St N.W., Washington DC 20006, USA.

(2)

Motility nitrate medium-See Hauschild AHW, Gilbert RJ, Harmon SM, O'Keefe MF, Vahlefeld R, (1997) ICMSF Methods Study VIII, Canadian Journal of Microbiology 23, 884-892. National Research Council of Canada, Ottawa ON K1A oR6, Canada

(3)

Lactose gelatin medium- See Hauschild AHW, Gilbert RJ, Harmon SM, O'Keefe MF, Vahlefield R, (1997) ICMSF Methods Study VIII, Canadian Journal of Microbiology 23, 884-892.

(4)

Charcoal gelatin discs-See Mackie and McCartney, (1996) Practical Medical Microbiology 14, 509. Churchill Livingstone, Robert Stevenson House, 1-3 Baxter’s Place, Leith Walk, Edinburgh EH1 3AF.

(5)

The National Collection of Type Cultures, Central Public Health Laboratory, 61 Colindale Ave, London NW9 5HT.

(6)

Buffered Peptone Water – See Edel, W. and Kampelmacher, E.H. (1973) Bulletin of World Health Organisation, 48: 167-174, World Health Organisation Distribution and Sales, CH-1211, Geneva 27, Switzerland (ISSN 0042-9686).

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources