- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
17.—(1) The master compass shall be installed with its fore-and-aft datum line parallel to the ship’s fore-and-aft datum line to within ±0.5°.
(2) The compass card of the master compass, or a repeater of the heading information, shall be sited so that it is clearly readable by the helmsman when steering the ship.
(3) Where provided, repeaters used for taking visual bearing shall be installed with their fore-and-aft datum lines parallel to the ship’s fore-and-aft datum line to within ±0.5°,
(4) The master compass shall be sited so as to avoid, where practicable, excessive errors being caused to the gyro compass installation due to the ship rolling, pitching or yawing.
(5) Where in a gyro compass installation fitted on or after 1st September 1984, failure of one repeater could cause an error in any other repeater a readily accessible means shall be provided for isolating each repeater output from the master compass.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: