- Latest available (Revised)
- Original (As adopted by EU)
Commission Directive 2010/61/EU of 2 September 2010 adapting for the first time the Annexes to Directive 2008/68/EC of the European Parliament and of the Council on the inland transport of dangerous goods to scientific and technical progress (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
This is the original version (as it was originally adopted).
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Directive 2008/68/EC of the European Parliament and of the Council of 24 September 2008 on the inland transport of dangerous goods(1), and in particular Article 8(1) thereof,
Whereas:
(1) Annex I, Section I.1, Annex II, Section II.1 and Annex III, Section III.1. to Directive 2008/68/EC refer to provisions set out in international agreements on the inland transport of dangerous goods by road, rail and inland waterways as defined in Article 2 of that Directive.
(2) The provisions of these international agreements are updated every two years. Consequently, amended versions of these agreements shall apply as from 1 January 2011, with a transitional period up to 30 June 2011.
(3) Annex I, Section I.1, Annex II, Section II.1 and Annex III, Section III.1. to Directive 2008/68/EC should therefore be amended accordingly.
(4) The measures provided for in this Directive are in accordance with the opinion of the Committee on the inland transport of dangerous goods,
HAS ADOPTED THIS DIRECTIVE:
The Annexes to Directive 2008/68/EC are amended as follows:
In Annex I, Section I.1 is replaced by the following:
Annexes A and B to the ADR, as applicable with effect from 1 January 2011, it being understood that “contracting party” is replaced by “Member State” as appropriate.’
1.Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by 30 June 2011 at the latest. They shall forthwith communicate to the Commission the text of those provisions and a correlation table between those provisions and this Directive.
When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.
2.Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.
This Directive shall enter into force on the 20th day following its publication in the Official Journal of the European Union.
This Directive is addressed to the Member States.
Done at Brussels, 2 September 2010.
For the Commission
The President
José Manuel Barroso
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including:
The data on this page is available in the alternative data formats listed: