- Latest available (Revised)
- Original (As adopted by EU)
Commission Directive 2008/74/EC of 18 July 2008 amending, as regards the type approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and access to vehicle repair and maintenance information, Directive 2005/55/EC of the European Parliament and of the Council and Directive 2005/78/EC (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
This is the original version (as it was originally adopted).
Directive 2005/55/EC is amended as follows:
Article 1 is replaced by the following:
For the purposes of this Directive the following definitions shall apply:
“vehicle” means any motor vehicle as defined in Article 2 of Directive 70/156/EEC with a reference mass exceeding 2 610 kg;
“engine” means the motive propulsion source of a vehicle for which type approval as a separate technical unit, as defined in Article 2 of Directive 70/156/EEC, may be granted;
“enhanced environment-friendly vehicle (EEV)” means a vehicle propelled by an engine which complies with the permissive emission limit values set out in row C of the tables in Section 6.2.1 of Annex I.’
Annexes I, II, III and VI to Directive 2005/55/EC are amended in accordance with Annex I to this Directive.
Directive 2005/78/EC is amended as follows:
Article 2 is replaced by the following:
Measures for the implementation of Articles 3 and 4 of Directive 2005/55/EC are laid down in Annexes II to VII to this Directive.
Annex VI shall apply for the purposes of the type approval of vehicles with compression-ignition engines and of such engines.
Annex VII shall apply for the purposes of the type approval of vehicles with spark ignition engines and of such engines.’
In point 1 of Annex V, Section 2 is replaced by the following:
Annexes VI and VII as set out in Annex II to this Directive are added.
1.Member States shall adopt and publish, by 2 January 2009 at the latest, the laws, regulations and administrative provisions necessary to comply with this Directive. They shall forthwith communicate to the Commission the text of those provisions and a correlation table between those provisions and this Directive.
They shall apply those provisions from 3 January 2009.
When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.
2.Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.
This Directive shall enter into force on the 20th day following its publication in the Official Journal of the European Union.
This Directive is addressed to the Member States.
Done at Brussels, 18 July 2008.
For the Commission
Günter Verheugen
Vice-President
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: