- Latest available (Revised) - English
- Latest available (Revised) - Welsh
- Original (As made) - English
- Original (As made) - Welsh
This is the original version (as it was originally made).
14. In the table set out in paragraph 13 references to type A, B, C and D instruments shall be construed as referring to instruments having a point length (a), shoulder length (b), boss length (c), aperture length (d), aperture width (e), bore width (f) and outside diameter (g) as shown in the diagram below of the dimensions specified in the corresponding entries in the following table—
Type of Instrument | Point length | Shoulder length | Boss length | Aperture length | Aperture width | Bore width | Outside diameter |
---|---|---|---|---|---|---|---|
mm | mm | mm | mm | mm | mm | mm | |
(a) | (b) | (c) | (d) | (e) | (f) | (g) | |
A | 42 | 7 | 8 | 20 | 8 | 10 | 12 |
B | 85 | 12 | 10 | 33 | 11 | 13 | 15 |
C | 82 | 12 | 13 | 40 | 15 | 17 | 19 |
D | 78 | 15 | 15 | 40 | 18 | 20 | 22 |
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: