The Road Vehicles (Defeat Devices, Fuel Economy and Type-Approval) (Amendment) Regulations 2018

9.—(1) In Schedule 4 (technical and administrative requirements for grant of national small series type approval), Section 1 of Part 2 (requirements for vehicles of category M1) is amended as follows.

(2) In item 2 of the table (emissions)—

(a) for the heading “2. Emissions”, substitute “ 2. Light Duty Emissions ”;

(b) in the first column—

(i) in paragraph 3, for “Vehicles”, substitute “ Complete or Completed vehicles ”.

(ii) after paragraph 3 insert—

“4. Complete or Completed vehicles manufactured after 1st December 2018: the technical provisions of Annex XXI to Regulation (EU) No. 2017/1151 (WLTP)”;

(c) in the third column—

(i) in paragraph 5 for “The requirements”, substitute “ In the case of a Completed vehicle, the requirements ”;

(ii) in paragraph 6, at the end, insert “ or aerodynamic performance ”.

(3) In item 3 of the table (fuel tanks / rear protective devices), in the first column, at the end of paragraph 1 insert—

“Or The technical provisions of Regulation (EC) No. 79/2009 or UNECE Regulation 134 for hydrogen.”.

(4) Omit item 11 of the table (diesel smoke).

(5) In item 41 of the table (diesel emissions)—

(a) for the heading “41. Diesel Emissions”, substitute the heading “ 41. Heavy Duty Emissions ”;

(b) in the first column, after paragraph 2, insert—

“3. Complete or Completed vehicles manufactured on or after 1st September 2018: Regulation (EC) No. 595/2009 Annex I limit values”;

(c) in the third column, in paragraph 3, for “For vehicles with a maximum mass equal to or exceeding 2500kg” substitute “ In the case of Completed vehicles ”.

(6) At the end of the table add the following item—

“69. Electrical Safety
Vehicle: The technical provisions of UNECE Regulation 100.01”