- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
Regulation 20
1. The Lifts Regulations 2016(1) are amended in accordance with paragraphs 2 to 10.
2. In regulation 2, in paragraph (1) for the definition of “relevant conformity assessment procedure” substitute—
““relevant conformity assessment procedure” means—
in relation to lifts, a conformity assessment procedure referred to in regulation 47 (conformity assessment procedures for lifts); and
in relation to safety components for lifts, a conformity assessment procedure referred to in regulation 48 (conformity assessment procedures for safety components for lifts);”.
3. In regulation 10, in paragraph (1)(b) for “point 6.2 of Annex 1 to the Directive (as amended from time to time)” substitute “paragraph 7(2) of Schedule 1”.
4. In regulation 19, in paragraph (1)(b) for “point 6.1 of Annex 1 to the Directive (as amended from time to time)” substitute “paragraph 7(1) of Schedule 1”.
5. In regulation 29, in paragraph (1) for “point 6.1 of Annex 1 to the Directive (as amended from time to time)” substitute “paragraph 7 (1) of Schedule 1”.
6. In regulation 37, in paragraph (1)(a)(iii) for “point 6.1 of Annex 1 to the Directive (as amended from time to time)” substitute “paragraph 7(1) of Schedule 1”.
7. In regulation 47, in paragraph (4) for “procedure in paragraph 9(1)(a)” substitute “any of the procedures in paragraph (1)”.
8. In Schedule 1—
(a)in paragraph 2 (general)—
(i)in sub-paragraph (2) (application of Directive 2006/42/EC) for “this Annex” substitute “this Schedule”;
(ii)in sub-paragraph (9) for “These requirements” substitute “The requirement of sub-paragraph (8)”;
(b)in paragraph 4 (risks for persons in the car)—
(i)in sub-paragraph (1) for “the third sub-paragraph of point 2.3” substitute “paragraph 3 (7)”;
(ii)in sub-paragraph (7) for “point 2.2” substitute “paragraph 3(3)”;
(iii)in sub-paragraph (8) for “point 2.2” substitute “paragraph 3(3)”;
(iv)in sub-paragraph (9) for “point 3.2” substitute “sub-paragraphs (3) to (5)”;
(c)in paragraph 5 (other risks), in sub-paragraph (9)—
(i)for “point 4.5” substitute “sub-paragraph (5)”;
(ii)for point “4.8” substitute “sub-paragraph (8)”;
(d)in paragraph 7 (instructions), in sub-paragraph (2)(a) for “point 4.4” substitute “paragraph 5 (4)”.
9. In Schedule 3, in paragraph 2 for “point 3.2” substitute “paragraph 4, sub-paragraphs (3) to (5)”.
10. In Part 1 of Schedule 5 (EU declaration of conformity for lifts)—
(a)in paragraph 1 for “point 6.2 ” substitute “paragraph 7(2)”;
(b)in paragraph 1(f) for “the Directive” substitute “the relevant Union harmonisation legislation”.
11.—(1) The Recreational Craft Regulations 2017(2) are amended as follows.
(2) In regulation 14 (duty to provide information), for paragraph (2) substitute—
“(2) Where it is not possible to provide the information referred to in paragraph (1) on the product, the manufacturer must ensure that the information is provided—
(a)on the packaging; or
(b)in a document accompanying the product.”.
(3) In regulation 29 (duty not to place a product on the market where a distributor suspects that it is not in conformity)—
(a)in the heading for “place” substitute “make available”; and
(b)in paragraph (1) for “place the product” substitute “make the product available”.
(4) In regulation 32, in paragraph (3) omit “placed”.
(5) In regulation 73, for sub-paragraph (1)(d) substitute—
“(d)regulations 18 to 25;”.
12.—(1) The Radio Equipment Regulations 2017(3) are amended as follows.
(2) In regulation 66 (penalties), in paragraph (2) for “regulations 11, 16, 28 and 35” substitute “regulations 11, 16, 28, 29 and 35”.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: