Search Legislation

The Guarantees of Origin of Electricity Produced from High-efficiency Cogeneration (Amendment) (EU Exit) Regulations 2018

 Help about what version

What Version

 Help about advanced features

Advanced Features

 Help about opening options

Opening Options

Changes over time for: Section 3

 Help about opening options

Alternative versions:

Changes to legislation:

There are currently no known outstanding effects for the The Guarantees of Origin of Electricity Produced from High-efficiency Cogeneration (Amendment) (EU Exit) Regulations 2018, Section 3. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

Amendment of the Guarantees of Origin of Electricity Produced from High-efficiency Cogeneration Regulations 2007U.K.

This section has no associated Explanatory Memorandum

3.—(1) The Guarantees of Origin of Electricity Produced from High-efficiency Cogeneration Regulations 2007 M1 are amended as follows.

(2) For regulation 2, substitute—

Interpretation

2.  In these Regulations—

CHPGO” means a guarantee of origin of electricity produced from high-efficiency cogeneration M2;

the CHPGO holder” means the person to whom the CHPGO is issued or transferred;

cogeneration” means the simultaneous generation in one process of thermal energy and electrical or mechanical energy;

cogeneration unit” means a unit that is able to operate in cogeneration mode;

“the competent authority” is the Secretary of State for Business, Energy and Industrial Strategy;

economically justifiable demand” means demand that does not exceed the needs for heating or cooling and which would otherwise be satisfied at market conditions by energy generation processes other than cogeneration;

electricity from cogeneration” means electricity generated in a process linked to the production of useful heat and calculated in accordance with the methodology laid down in Schedule 4;

energy” means all forms of energy products, combustible fuels, heat, renewable energy, electricity, or any other form of energy;

Energy Efficiency Directive” means Directive 2012/27/EU of the European Parliament and of the Council of 25th October 2012 on energy efficiency, amending Directives 2009/125/EC and 2010/30/EU and repealing Directives 2004/8/EC and 2006/32/EC M3, as it applies in the European Union;

Great Britain” includes—

(a)

the territorial sea of the United Kingdom which is adjacent to Great Britain; and

(b)

any area designated under the Continental Shelf Act 1964 M4;

guarantee of origin” means, except in relation to paragraphs (3) to (5) of regulation 10, a certificate issued by the competent authority certifying that the electricity in respect of which the certificate is issued is electricity produced from high-efficiency cogeneration;

harmonised efficiency reference values” means the values indicated in paragraph 7 of Schedule 7 and set in accordance with that paragraph and with Commission Delegated Regulation (EU) 2015/2402 of 12 October 2015 reviewing harmonised efficiency reference values for separate production of electricity and heat in application of Directive 2012/27/EU of the European Parliament and of the Council;

high-efficiency cogeneration” means cogeneration that meets the criteria in Schedule 3;

micro-cogeneration unit” means a cogeneration unit with a maximum capacity below 50 kilowatt electrical (kWe);

overall efficiency” means the annual sum of electricity and mechanical energy production and useful heat output divided by the fuel input used for heat produced in a cogeneration process and gross electricity and mechanical energy production;

power-to-heat ratio” means the ratio of electricity from cogeneration to useful heat when operating in full cogeneration mode using operational data of the specific unit;

small-scale cogeneration unit” means a cogeneration unit with installed capacity below 1 megawatt electrical (MWe);

useful heat” means heat produced in a cogeneration process to satisfy economically justifiable demand for heating or cooling..

(3) In regulation 3—

(a)in the heading, omit “and designation of the competent authority”;

(b)omit paragraph (2).

(4) In regulation 5(3)(a), for “information required by paragraph (b) of Annex X to the Energy Efficiency Directive”, substitute “ matters set out in Schedule 2 ”.

(5) In regulation 10—

(a)in paragraph (1), for “Annex X to the Energy Efficiency Directive”, substitute “ Schedule 2 ”;

(b)for paragraph (3), substitute—

(3) Subject to paragraph (4), a public authority must recognise, as proof of the matters referred to in Schedule 2, a CHPGO which has been issued—

(a)in a member State in accordance with article 14(10) of the Energy Efficiency Directive; or

(b)in Northern Ireland in accordance with the Guarantees of Origin of Electricity Produced from High-efficiency Cogeneration Regulations (Northern Ireland) 2008 M5.;

(c)in paragraph (5)—

(i)for “another”, substitute “ a ”;

(ii)for “requires”, substitute “ required before [F1IP completion day].

(6) After Schedule 1, insert—

Regulations 5(3) and 10(1) and (3)

SCHEDULE 2U.K.Information to be contained in a CHPGO

1.  The identity, location, type and capacity (thermal and electrical) of the installation where the energy was produced.

2.  The dates and places of production.

3.  The lower calorific value of the fuel source from which the electricity was produced.

4.  The quantity and the use of the heat generated together with the electricity.

5.  The quantity of electricity from high-efficiency cogeneration calculated in accordance with Schedule 3 that the guarantee of origin represents.

6.  The primary energy savings calculated in accordance with Schedule 3 based on the harmonised efficiency reference values.

7.  The nominal electric and thermal efficiency of the plant.

8.  Whether and to what extent the installation has benefited from investment support.

9.  Whether and to what extent the unit of energy has benefited in any other way from a national support scheme, and the type of support scheme.

10.  The date on which the installation became operational.

11.  The date and country of issue and a unique identification number.

Regulation 2 and paragraphs 5 and 6 of Schedule 2

SCHEDULE 3U.K.Methodology for determining the efficiency of the cogeneration process

Values to be used

1.  Values used for calculation of efficiency of cogeneration and primary energy savings must be determined on the basis of the expected or actual operation of the unit under normal conditions of use.

High-efficiency cogeneration

2.  For the purposes of these Regulations high-efficiency cogeneration shall fulfil the following criteria—

(a)cogeneration production from cogeneration units shall provide primary energy savings, calculated in accordance with paragraph 3, of at least 10% compared with the references for separate production of heat and electricity;

(b)production from small-scale and micro-cogeneration units providing primary energy savings may qualify as high-efficiency cogeneration.

Calculation of primary energy savings

3.  The amount of primary energy savings provided by cogeneration production defined in accordance with Schedule 4 must be calculated on the basis of the following formula—

where—

PES is primary energy savings;

CHP Hη is the heat efficiency of the cogeneration production defined as annual useful heat output divided by the fuel input used to produce the sum of useful heat output and electricity from cogeneration;

Ref Hη is the harmonised efficiency reference value for separate heat production;

CHP Eη is the electrical efficiency of the cogeneration production defined as annual electricity from cogeneration divided by the fuel input used to produce the sum of useful heat output and electricity from cogeneration. For the purpose only of calculating the electrical efficiency of the cogeneration production, where a cogeneration unit generates mechanical energy, the annual electricity from cogeneration may be increased by an additional element representing the amount of electricity which is equivalent to that of mechanical energy;

Ref Eη is the harmonised efficiency reference value for separate electricity production.

Calculations of primary energy savings using alternative calculation

4.(1) The competent authority may calculate primary energy savings from a production of heat and electricity and mechanical energy in accordance with sub-paragraph (2) without applying Schedule 4 to exclude the non-cogenerated heat and electricity parts of the same process. Such a production can be regarded as high-efficiency cogeneration provided it fulfils the efficiency criteria in paragraph 2 and, for cogeneration units with an electrical capacity larger than 25 megawatts (MW), the overall efficiency is above 70%. However, specification of the quantity of electricity from cogeneration produced in such a production, for issuing a guarantee of origin, must be determined in accordance with Schedule 4.

(2) If primary energy savings for a process are calculated using the alternative calculation in accordance with sub-paragraph (1), the primary energy savings must be calculated using the formula in paragraph 3 but replacing “CHP Hη” with “Hη” and “CHP Eη” with “Eη”, where—

  • Hη means the heat efficiency of the process, defined as the annual heat output divided by the fuel input used to produce the sum of heat output and electricity output;

  • Eη means the electricity efficiency of the process, defined as the annual electricity output divided by the fuel input used to produce the sum of heat output and electricity output. For the purpose only of calculating the electrical efficiency of the cogeneration production, where a cogeneration unit generates mechanical energy, the annual electricity from cogeneration may be increased by an additional element representing the amount of electricity which is equivalent to that of mechanical energy.

5.  The competent authority may use other reporting periods than one year for the purpose of the calculations according to paragraphs 3 and 4.

6.  For micro-cogeneration units the calculation of primary energy savings may be based on certified data.

Efficiency reference values for separate production of heat and electricity

7.(1) The harmonised efficiency reference values consist of a matrix of values differentiated by relevant factors, including year of construction and types of fuel, and must be based on a well-documented analysis taking, inter alia, into account data from operational use under realistic conditions, fuel mix and climate conditions as well as applied cogeneration technologies.

(2) The efficiency reference values for separate production of heat and electricity in accordance with the formula set out in paragraph 3 establish the operating efficiency of the separate heat and electricity production that cogeneration is intended to substitute.

(3) The efficiency reference values must be calculated according to the following principles—

(a)for cogeneration units the comparison with separate electricity production must be based on the principle that the same fuel categories are compared;

(b)each cogeneration unit must be compared with the best available and economically justifiable technology for separate production of heat and electricity on the market in the year of construction of the cogeneration unit;

(c)the efficiency reference values for cogeneration units older than 10 years of age must be fixed on the reference values of units of 10 years of age;

(d)the efficiency reference values for separate electricity production and heat production must reflect the climate of the United Kingdom.

Regulation 2 and paragraphs 3 and 4 of Schedule 3

SCHEDULE 4U.K.General principles for the calculation of electricity from cogeneration

General principlesU.K.

1.(1) Values used for calculation of electricity from cogeneration must be determined on the basis of the expected or actual operation of the unit under normal conditions of use. For micro-cogeneration units the calculation may be based on certified values.

(2) Electricity production from cogeneration must be considered equal to total annual electricity production of the unit measured at the outlet of the main generators—

(a)in cogeneration units of the types referred to in paragraph 2(b) and (d) to (h) with an annual overall efficiency at a level of at least 75%; and

(b)in cogeneration units of the types referred to in paragraph 2(a) and (c) with an annual overall efficiency at a level of at least 80%.

(3) In cogeneration units with an annual overall efficiency below the value referred to in sub-paragraph (2)(a) or with an annual overall efficiency below the value referred to in sub-paragraph (2)(b) cogeneration is calculated according to the following formula—

where—

ECHP is the amount of electricity from cogeneration;

C is the power-to-heat ratio;

HCHP is the amount of useful heat from cogeneration (calculated for this purpose as total heat production minus any heat produced in separate boilers or by live steam extraction from the steam generator before the turbine).

(4) For the purposes of sub-paragraph (3), the calculation of electricity from cogeneration must be based on the actual power-to-heat ratio. If the actual power-to-heat ratio of a cogeneration unit is not known, the following default values may be used for units of types (a), (b), (c), (d) and (e) referred to in paragraph 2 provided that the calculated cogeneration electricity is less or equal to total electricity production of the unit—

Type of unitDefault power to heat ratio, C
Combined cycle gas turbine with heat recovery0.95
Steam back pressure turbine0.45
Steam condensing extraction turbine0.45
Gas turbine with heat recovery0.55
Internal combustion engine0.75

(5) If a share of the energy content of the fuel input to the cogeneration process is recovered in chemicals and recycled this share can be subtracted from the fuel input before calculating the overall efficiency used in sub-paragraphs (2) and (3).

(6) The power-to-heat ratio when operating in cogeneration mode at a capacity lower than full cogeneration is the ratio of electricity to useful heat determined using operational data of the specific unit.

(7) The Secretary of State may use other reporting periods than one year for the purpose of the calculations according to sub-paragraphs (2) and (3).

Cogeneration technologies covered by these RegulationsU.K.

2.  The cogeneration technologies covered by these Regulations are—

(a)combined cycle gas turbine with heat recovery;

(b)steam back pressure turbine;

(c)steam condensing extraction turbine;

(d)gas turbine with heat recovery;

(e)internal combustion engine;

(f)microturbines;

(g)Stirling engines;

(h)fuel cells;

(i)steam engines;

(j)Organic Rankine cycles;

(k)any other type of technology or combination thereof involving the simultaneous generation in one process of thermal energy and electrical or mechanical energy.

3.  When determining the values used for the calculation of electricity from cogeneration, the detailed Guidelines established by Commission Decision 2008/952/EC of 19 November 2008 establishing detailed guidelines for the implementation and application of Annex 2 to Directive 2004/8/EC of the European Parliament and of the Council must be applied..

Textual Amendments

Commencement Information

I1Reg. 3 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)

Marginal Citations

M1S.I. 2007/292, as amended by S.I. 2009/229, 2014/1403, 2016/992 and 2016/1108.

M2Cogeneration is commonly referred to in the United Kingdom as combined heat and power or CHP.

M3OJ L 315 14.11.2012, p. 1, as last amended by Directive (EU) 2018/844 (OJ L 156, 19.6.2018, p. 75).

M5S.R. 2008 No. 287, as amended by S.R. 2014 No. 284.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources