- Latest available (Revised)
- Point in Time (15/07/2011)
- Original (As made)
Version Superseded: 06/04/2012
Point in time view as at 15/07/2011.
There are currently no known outstanding effects for the The Building Regulations 2010, SCHEDULE 3.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulations 12(6)(a) and 20(1)
Column 1Type of Work | Column 2Person carrying out work |
---|---|
1. Installation of a heat-producing gas appliance. | A person, or an employee of a person, who is a member of a class of persons approved in accordance with regulation 3 of the Gas Safety (Installation and Use) Regulations 1998 M1. |
2. Installation of heating or hot water system connected to a heat-producing gas appliance, or associated controls. | A person registered by Ascertiva Group Limited M2, Association of Plumbing and Heating Contractors (Certification) Limited M3, Benchmark Certification Limited M4, Building Engineering Services Competence Accreditation Limited M5, Capita Gas Registration and Ancillary Services Limited M6, ECA Certification Limited M7, HETAS Limited M8, NAPIT Registration Limited M9, Oil Firing Technical Association Limited M10 or Stroma Certification Limited M11 in respect of that type of work. |
3. Installation of— (a)an oil-fired combustion appliance; or (b)oil storage tanks and the pipes connecting them to combustion appliances. | A person registered by Ascertiva Group Limited, Association of Plumbing and Heating Contractors (Certification) Limited, Benchmark Certification Limited, Building Engineering Services Competence Accreditation Limited, ECA Certification Limited, HETAS Limited, NAPIT Registration Limited or Oil Firing Technical Association Limited in respect of that type of work. |
4. Installation of a solid fuel burning combustion appliance. | A person registered by Ascertiva Group Limited, Association of Plumbing and Heating Contractors (Certification) Limited, Benchmark Certification Limited, Building Engineering Services Competence Accreditation Limited, ECA Certification Limited, HETAS Limited or NAPIT Registration Limited in respect of that type of work. |
5. Installation of a heating or hot water system connected to an oil-fired combustion appliance or its associated controls. | A person registered by Ascertiva Group Limited, Association of Plumbing and Heating Contractors (Certification) Limited, Benchmark Certification Limited, Building Engineering Services Competence Accreditation Limited, ECA Certification Limited, HETAS Limited, NAPIT Registration Limited, Oil Firing Technical Association Limited or Stroma Certification Limited in respect of that type of work. |
6. Installation of a heating or hot water system connected to a solid fuel burning combustion appliance or its associated controls. | A person registered by Ascertiva Group Limited, Association of Plumbing and Heating Contractors (Certification) Limited, Benchmark Certification Limited, Building Engineering Services Competence Accreditation Limited, ECA Certification Limited, HETAS Limited, NAPIT Registration Limited, Oil Firing Technical Association Limited or Stroma Certification Limited in respect of that type of work. |
7. Installation of a heating or hot water system connected to an electric heat source or its associated controls. | A person registered by Ascertiva Group Limited, [F1Association of Plumbing and Heating Contractors (Certification) Limited] Benchmark Certification Limited, Building Engineering Services Competence Accreditation Limited, ECA Certification Limited, HETAS Limited, NAPIT Registration Limited, Oil Firing Technical Association Limited or Stroma Certification Limited in respect of that type of work. |
8. Installation of a mechanical ventilation or air conditioning system or associated controls, which does not involve work on a system shared with parts of the building occupied separately, in a building other than a dwelling. | A person registered by Ascertiva Group Limited, Benchmark Certification Limited or Building Engineering Services Competence Accreditation Limited in respect of that type of work. |
9. Installation of an air conditioning or ventilation system in a dwelling, which does not involve work on systems shared with other dwellings. | A person registered by Ascertiva Group Limited, Benchmark Certification Limited, Building Engineering Services Competence Accreditation Limited or NAPIT Registration Limited in respect of that type of work. |
10. Installation of a lighting system or electric heating system, or associated electrical controls. | A person registered by Ascertiva Group Limited, Building Engineering Services Competence Accreditation Limited, ECA Certification Limited, NAPIT Registration Limited or Stroma Certification Limited in respect of that type of work. |
11. Installation of fixed low or extra-low voltage electrical installations. | A person registered by Ascertiva Group Limited, Benchmark Certification Limited, British Standards Institution M12, Building Engineering Services Competence Accreditation Limited, ECA Certification LimitedF2... [F3,] NAPIT Registration Limited [F4, Oil Firing Technical Association Limited or Stroma Certification Limited] in respect of that type of work. |
12. Installation of fixed low or extra-low voltage electrical installations as a necessary adjunct to or arising out of other work being carried out by the registered person. | A person registered by Ascertiva Group Limited, Association of Plumbing and Heating Contractors (Certification) Limited, Benchmark Certification Limited, Building Engineering Services Competence Accreditation Limited, ECA Certification Limited, NAPIT Registration Limited F5... [F6,] Oil Firing Technical Association Limited [F7or Stroma Certification Limited] in respect of that type of electrical work. |
13. Installation, as a replacement, of a window, rooflight, roof window or door in an existing dwelling. | |
14. Installation of a sanitary convenience, sink, washbasin, bidet, fixed bath, shower or bathroom in a dwelling, which does not involve work on shared or underground drainage. | A person registered by Ascertiva Group Limited, Association of Plumbing and Heating Contractors (Certification) Limited, Benchmark Certification Limited, Building Engineering Services Competence Accreditation Limited or NAPIT Registration Limited in respect of that type of work. |
15. Installation of a wholesome cold water supply or a softened wholesome cold water supply. | A person registered by Ascertiva Group Limited, Association of Plumbing and Heating Contractors (Certification) Limited, Benchmark Certification Limited, Building Engineering Services Competence Accreditation Limited or NAPIT Registration Limited in respect of that type of work. |
16. Installation of a supply of non-wholesome water to a sanitary convenience fitted with a flushing device which does not involve work on shared or underground drainage. | A person registered by Ascertiva Group Limited, Association of Plumbing and Heating Contractors (Certification) Limited, Benchmark Certification Limited, Building Engineering Services Competence Accreditation Limited or NAPIT Registration Limited in respect of that type of work. |
17. Installation in a building of a system to produce electricity, heat or cooling— (a)by microgeneration, or (b)from renewable sources (as defined in European Parliament and Council Directive 2009/28/EC of 23 April 2009 on the promotion of the use of energy from renewable sources M17). | A person registered by Ascertiva Group Limited, Association of Plumbing and Heating Contractors (Certification) Limited, Benchmark Certification Limited, British Standards Institution, Building Engineering Services Competence Accreditation Limited, ECA Certification Limited, HETAS Limited, NAPIT Registration Limited, Oil Firing Technical Association Limited or Stroma Certification Limited in respect of that type of work. |
18. Insertion of insulating material into the cavity walls of an existing building. | A person registered under the Cavity Wall Insulation Self Certification Scheme by Cavity Insulation Guarantee Agency Limited M18 in respect of that type of work. |
19. Installation, as a replacement, of the covering of a pitched or flat roof and work carried out by the registered person as a necessary adjunct to that installation. This paragraph does not apply to the installation of solar panels. | A person registered by National Federation of Roofing Contractors Limited M19 in respect of that type of work. |
20. Any building work which is necessary to ensure that any appliance, service or fitting which is installed and which is described in the preceding entries in column 1 above, complies with the applicable requirements contained in Schedule 1. This paragraph does not apply to the provision of a masonry chimney. | The person who installs the appliance, service or fitting to which the building work relates and who is described in the corresponding entry in column 2 above. |
[F821 . Installation, as a replacement, of a window, rooflight, roof window or door in an existing building other than a dwelling. This paragraph does not apply to glass which is load bearing or structural or which forms part of glazed curtain walling or a revolving door. | A person registered by BM Trada Certification Limited or under the Fenestration Self-Assessment Scheme by Fensa Limited in respect of that type of work.] |
Textual Amendments
F1Words in Sch. 3 inserted (15.7.2011) by The Building (Amendment) Regulations 2011 (S.I. 2011/1515), regs. 1(2), 3(5)(a)
F2Word in Sch. 3 omitted (15.7.2011) by virtue of The Building (Amendment) Regulations 2011 (S.I. 2011/1515), regs. 1(2), 3(5)(b)(i)
F3Word in Sch. 3 inserted (15.7.2011) by The Building (Amendment) Regulations 2011 (S.I. 2011/1515), regs. 1(2), 3(5)(b)(i)
F4Words in Sch. 3 inserted (15.7.2011) by The Building (Amendment) Regulations 2011 (S.I. 2011/1515), regs. 1(2), 3(5)(b)(ii)
F5Word in Sch. 3 omitted (15.7.2011) by virtue of The Building (Amendment) Regulations 2011 (S.I. 2011/1515), regs. 1(2), 3(5)(c)(i)
F6Word in Sch. 3 inserted (15.7.2011) by The Building (Amendment) Regulations 2011 (S.I. 2011/1515), regs. 1(2), 3(5)(c)(i)
F7Words in Sch. 3 inserted (15.7.2011) by The Building (Amendment) Regulations 2011 (S.I. 2011/1515), regs. 1(2), 3(5)(c)(ii)
F8Words in Sch. 3 added (15.7.2011) by The Building (Amendment) Regulations 2011 (S.I. 2011/1515), regs. 1(2), 3(5)(d)
Marginal Citations
M2A company formed and registered under the Companies Acts (defined in section 2 of the Companies Act 2006, c.46) with the registration number 02513162.
M3A company formed and registered under the Companies Acts with the registration number 02876277.
M4A company formed and registered under the Companies Acts with the registration number 07144771.
M5A company formed and registered under the Companies Acts with the registration number 03712932.
M6A company formed and registered under the Companies Acts with the registration number 05078781.
M7A company formed and registered under the Companies Acts with the registration number 06418028.
M8A company formed and registered under the Companies Acts with the registration number 02117828.
M9A company formed and registered under the Companies Acts with the registration number 05190452.
M10A company formed and registered under the Companies Acts with the registration number 02739706.
M11A company formed and registered under the Companies Acts with the registration number 06429016.
M12Incorporated by Royal Charter.
M13A company formed and registered under the Companies Acts with the registration number 03058561.
M14A company formed and registered under the Companies Acts with the registration number 02110046.
M15A company formed and registered under the Companies Acts with the registration number 04350234.
M16A company formed and registered under the Companies Acts with the registration number 04029350.
M17OJ No. L 140, 5.6.2009, p. 16.
M18A company formed and registered under the Companies Acts with the registration number 03044131.
M19A company formed and registered under the Companies Acts with the registration number 02591364.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: