- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
3. In the case of face workings where powered supports are used–
(a)such supports should be advanced as soon as is practicable after extraction and set so that the maximum distance between the end of the beam closest to the face and the face shall be 0.5 metres;
(b)during normal production at any place where a machine is used which shears mineral to a depth exceeding 0.4 metres, the said machine must not be permitted to approach within 27 metres of any powered support which has not been advanced from the previous cut; and
(c)where an immediate forward support system is used, the supports shall be advanced–
(i)as close as is practicable behind the coal getting machine, and
(ii)in any event, no more than 10 metres behind the coal getting machine.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: