- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
Regulation 10(2)
This module consists of module A, as referred to in Annex V, plus the following supplementary requirements:
On one or several boats representing the production of the manufacturer one or more of the following tests, equivalent calculation or control shall be carried out by the manufacturer or on his behalf:
test of stability according to point 3.2 of the Essential Requirements,(1)
test of buoyancy characteristics according to point 3.3 of the Essential Requirements
Provisions common to both variations
These tests or calculations or control shall be carried out on the responsibility of a notified body chosen by the manufacturer. On the responsibility of the notified body, the manufacturer shall affix the former’s distinguishing number during the manufacturing process.
The essential safety requirements in Annex I are set out in Schedule 1.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: