- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
7.—(1) Where there are no relevant harmonised standards, electrical equipment which satisfies international safety provisions shall be taken to comply with the requirements of regulation 5(1) above unless there are reasonable grounds for suspecting that the electrical equipment does not so comply.
(2) Where there are no relevant harmonised standards and no relevant international safety provisions, electrical equipment which has been manufactured in accordance with the national safety provisions applicable to that equipment in a member State and the compliance of the equipment with such provisions results in the equipment being at the time when the equipment is supplied in the United Kingdom at least as safe as it would be if it satisfied the requirements of regulation 5(1) above shall be taken to comply with the requirements of regulation 5(1) above unless there are reasonable grounds for suspecting that the electrical equipment does not so comply.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: