The Weights and Measures (Packaged Goods) (Amendment) Regulations 1992

2.  The Weights and Measures (Packaged Goods) Regulations 1986(1) are hereby amended in Schedule 4,—

(a) in paragraph 1(1), after head (a), by the addition of the following head—

“(aa) “the 1992 Regulations” mean the Non-automatic Weighing Instruments (EEC Requirements) Regulations 1992(2);”;

(b) in paragraph 1(1)(b)(ii), after the words “United Kingdom”, by the addition of the words “or an EC type-approval certificate within the meaning of the 1992 Regulations”;

(c) for paragraph 1(1)(c), by the substitution of the following head—

“(c) in relation to weighing equipment, ‘approved minimum load’—

(i) in the case of weighing equipment of an approved pattern, means the minimum load for which the pattern has been approved, and

(ii) in the case of a non-automatic weighing instrument, means the minimum load for which the type has been granted approval;”

(d) in paragraph 1(1)(d), at the end by the omission of the word “and” and, in paragraph (1)(e), at the end by the addition of the word “and”;

(e) after paragraph 1(1)(e), by the addition of the following head—

“(f) ‘non-automatic weighing instrument’ means a non-automatic weighing instrument which is for the time being of an approved type within the meaning of the 1992 Regulations.”.

(f) in paragraph 2, after the words “Directive 73/360/EEC,”, by the addition of the words “or which bears the sticker defined in regulation 2(1) of the 1992 Regulations,”;

(g) in paragraph 2(1)(c) and (d) and (2)(b), after the words “machine of an approved pattern” in each place where they occur, by the addition of the words “or a non-automatic weighing instrument, in either case”;

(h) in paragraph 2(2), in the Note to Table 3: BEAM SCALES, after the words “that Directive”, by the addition of the words

“;and references—

(a) to Class B machines include references to beam scales marked with the symbol

or

; and

(b) to Class C machines include references to beam scales marked with the symbol

or

,

in accordance with Council Directive No. 90/384/EEC(3).”.

(i) in paragraph 7, after the word “verification”, by the addition of the words “or the sticker defined in regulation 2(1) of the 1992 Regulations,”;

(j) in paragraph 7(1)(b) and (c), after the words “machine of an approved pattern” in each place where they occur, by the addition of the words “or a non-automatic weighing instrument, in either case”.

(1)

S.I. 1986/2049 to which there are amendments not relevant to these Regulations.

(2)

S.I. 1992/1579.

(3)

OJ L.189, 20.7.90, page 1 as corrected by the corrigendum published in OJ No. L 258, 22.9.90, p.35.