- Latest available (Revised)
- Original (As made)
The Electrical Equipment for Explosive Atmospheres (Certification) (Amendment) (No. 2) Regulations 1991
You are here:
- UK Statutory Instruments
- 1991 No. 2826
- Regulation 2
What Version
Opening Options
More Resources
Status:
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
Amendment to the principal Regulations
2.—(1) The principal Regulations shall be amended in accordance with the following paragraphs of this regulation.
(2) In regulation 2(1) in the definition of “the Gassy Mines Directive” there shall be inserted at the end “, and as amended by Commission Directive No. 91/269/EEC (OJ No. L134, 29.5.91, p.51)”.
(3) After regulation 11 of the principal Regulations there shall be inserted the following new regulation:—
“Transitional provisions
12.—(1) On or after 31st December 1991, a manufacturer of electrical equipment to which the Gassy Mines Directive applies may apply to a certification body (which has been appointed for the purpose set out in regulation 3(1)(a) of the unamended Regulations in respect of the electrical equipment for which the application is made) for issue of a certificate of conformity before 1st January 1993 attesting that the equipment which is the subject of the application conforms to the harmonised standards prescribed in the unamended Regulations; and in that case the provisions of the unamended Regulations, as appropriate, shall apply as if the application had been made under regulation 4 of those Regulations.
(2) An application for a certificate of conformity made under regulation 4 or for review under regulation 7 of the unamended Regulations before 31st December 1991 shall continue to be dealt with under the unamended Regulations as if the Electrical Equipment for Explosive Atmospheres (Certification) (Amendment) (No. 2) Regulations 1991 had not been made; and, subject to regulation 6, a certificate of conformity issued before 1st January 1993, whether before, on or after 31st December 1991, in accordance with the unamended Regulations (attesting that the electrical equipment to which the Gassy Mines Directive applies conforms to the harmonising standards prescribed in the unamended Regulations) or by virtue of paragraph (1) shall remain valid until the end of 31st December 2009.
(3) In this regulation “the unamended Regulations” means these Regulations as in force immediately before 31st December 1991.”
Options/Help
Print Options
PrintThe Whole Instrument
PrintThis Section only
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as enacted version that was used for the print copy
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.