- Latest available (Revised)
- Original (As made)
The Electrical Equipment for Explosive Atmospheres (Certification) (Amendment) Regualtions 1991
You are here:
What Version
Opening Options
More Resources
Status:
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
Amendment to the principal Regulations
2.—(1) The principal Regulations shall be amended in accordance with the following paragraphs of this regulation.
(2) In regulation 2(1) in the definition of “the Gassy Mines Directive” there shall be inserted at the end “, and as amended by Commission Directive No. 91/269/EEC (OJ No. L134, 29.5.91, p. 51)”.
(3) After regulation 11 of the principal Regulations there shall be inserted the following new Regulation:—
“Transitional provisions
12.—(1) On or after the coming into force of the amending regulations, a manufacturer of electrical equipment to which the Gassy Mines Directive applies may apply to a certification body (which has been appointed for the purpose set out in regulation 3(1)(a) of the principal regulations in respect of the electrical equipment for which the application is made) for issue of a certificate of conformity before 1st January 1993 attesting that the equipment which is the subject of the application conforms to the harmonised standards prescribed in the principal regulations ; and in that case the provisions of the principal regulations, as appropriate, shall apply as if the application had been made under regulation 4 of the principal regulations.
(2) A certificate of conformity (issued by virtue of the principal regulations before the amending regulations came into force or before 1st January 1993 by virtue of paragraph (1)) attesting that electrical equiment to which the Gassy Mines Directive applies conforms to the Harmonised standards prescribed in the principal regulations shall remain in force until 31st December 2009.
(3) In this regulation—
(a)“the amending regulations” means the Electrical Equipment for Explosive Atmospheres (Certification) (amendment) Regulations 1991 (S.I. 1991 No. 2570);
(b)“the principal regulations” means the Electrical Equipment for Explosive Atmospheres (Certification) Regulations 1990 as in force immediately before the amending regulations came into force.”.
Options/Help
Print Options
PrintThe Whole Instrument
PrintThis Section only
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as enacted version that was used for the print copy
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.