- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format. The electronic version of this UK Statutory Instrument has been contributed by Westlaw and is taken from the printed publication. Read more
103.—(1) The bearing surfaces and points of contact of all stays, hooks, loops and adjustable slides on dead-weight machines shall be made of hard steel, and the knife edges shall be so fitted as to be incapable of twisting.
(2) Adjustable slides shall be secured in position by means of lock nuts or other suitably secure device.
104.—(1) The goods platform of dead-weight machines shall not exceed in length the length of the beam, or in width double the width of the beam. Folding wings shall not increase such dimensions by more than one-third in either direction.
(2) The platforms shall be made of metal or hard wood.
105. The minimum movement of the beam from the horizontal in dead-weight machines, shall be as follows:—
(a)if the machine is of the vibrating weighing instrument type, five-eighths of an inch in both directions;
(b)if the machine is of the accelerating weighing instrument type, seveneights of an inch in one direction only.
106. Loose balancing material for the adjustment of dead-weight machines shall be contained in a balancing box permanently fixed beneath one platform, and its weight shall not exceed three-quarter per cent. of the capacity of the machine. Any other balancing material shall be in one piece and shall be permanently attached to the machine.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: