- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
Article 2
3. For Class F and Class G substitute—
“Class F | ||
Permitted development | F. | The provision of a ground or water source heat pump within the curtilage of a dwellinghouse. |
Development not permitted | F.1 | Development is not permitted by Class F if— (a) any part of the heat pump or its housing would be within 3 metres of the boundary of the curtilage of the dwellinghouse and would exceed 4 metres in height; (b) it would involve the provision of any heat pump within an area of special scientific interest or a site of archaeological interest. |
Class G | ||
Permitted development | G. | The installation, alteration or replacement of an air source heat pump within the curtilage of a dwellinghouse. |
Development not permitted | G.1 | Development is not permitted by Class G if— (a) it would result in the presence within the curtilage of more than one air source heat pump; (b) any part of the air source heat pump would be installed within 1 metre of the boundary of the curtilage of another dwelling house; (c) any part of the air source heat pump would be situated on land forward of a wall which— (i) faces onto a road; and (ii) forms either the principal elevation or a side elevation of the original dwellinghouse. (d) in the case of a dwellinghouse within a World Heritage Site or conservation area any part of the air source heat pump faces onto and is visible from a road; (e) the external unit of the air source heat pump would exceed 3 metres in height; (f) the air source heat pump would be installed on a roof; (g) the air source heat pump would be situated within the curtilage of a listed building unless listed building consent for the development has previously been granted. |
Conditions | G.2 | Development is permitted by Class G subject to the following conditions— (a) the air source heat pump would be used to provide heat for use within the curtilage of the dwellinghouse; (b) when no longer used to provide heat it shall be removed as soon as reasonably practicable; and (c) the air source heat pump must comply with MCS planning standards or equivalent standards. |
Interpretation of Class G | G.3 | In Class G “MCS Planning Standards” means the product and installation standards for air source heat pumps specified in the Microgeneration Certification Scheme MCS 020 (1).” |
Issue 1.3 dated 19th June 2019 at MCS-020.pdf (mcscertified.com)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Rule and provides information about its policy objective and policy implications. They aim to make the Statutory Rule accessible to readers who are not legally qualified and accompany any Northern Ireland Statutory Rule or Draft Northern Ireland Statutory Rule laid before the UK Parliament during the suspension of the Northern Ireland Assembly.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: