Search Legislation

The Solvent Emissions Regulations (Northern Ireland) 2004

Status:

This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Regulation 8(10)

SCHEDULE 2NEW PARTS 3 AND 4 OF SCHEDULE 3 TO THE 2003 REGULATIONS (PRESCRIBED DATE AND TRANSITIONAL ARRANGEMENTS)

PART 3sed installations

13.  The prescribed date for a new SED installation is –

(a)in relation to new SED installations brought into operation before the coming into operation of the SED Regulations –

(i)where an application for a permit to operate the SED installation is made before the expiry of a period 4 months from the of date of coming into operation of these regulations, the determination date for the SED installation;

(ii)where no such application is made, the day after the expiry of the period of 4 months beginning on the date of coming into operation of the SED Regulations;

(b)in relation to all other new SED installations, the date of coming into operation of the SED Regulations.

14.—(1) Subject to paragraphs 15 and 16, the prescribed date for an existing SED installation is –

(a)where an application for a permit to operate the SED installation is duly made by the relevant date, the determination date for the SED installation;

(b)where no such application is made, 1st November 2006.

(2) For the purposes of sub-paragraph (1) the relevant date for an existing SED installation is –

(a)for installations wishing to use the reduction scheme, 31st October 2005

(b)for all other installations, 31st October 2006.

15.—(1) Where there was a substantial change in the operation of an existing SED installation on or after 1st April 2001 and before the date of coming into operation of the SED Regulations, the prescribed date for that part of the SED installation affected by the change shall be –

(a)where an application for a permit authorising the operation of that part of the installation is duly made before the expiry of a period 4 months from the date of coming into operation of the SED Regulations, the determination date for the SED installation;

(b)where no such application is made, the day after the expiry of the period of 4 months from date of coming into operation of the SED Regulations.

(2) Where an existing SED installation undergoes a substantial change, the prescribed date for the part of the installation affected by the change shall be the date on which the change is made, if earlier than the date which would be the prescribed date for the SED installation under this part.

(3) Sub-paragraphs (1) and (2) do not apply to that part of the SED installation which undergoes a substantial change where the total emissions of the SED installation do not exceed those that would have been permitted had the substantially changed part been subject to a permit containing conditions necessary to ensure that the SED installation complied with the requirements of Article 5 of the Solvent Emissions Directive.

16.—(1) Where an existing SED installation installed abatement equipment on or after 1st April 2001 and before the coming into operation of the SED Regulations, the prescribed date for the affected part shall be –

(a)where an application for a permit authorising the operation of that part of the installation is duly made before the expiry of a period 4 months from the date of coming into operation of the SED Regulations, the determination date for the SED installation;

(b)where no such application is made, the expiry of the period of 4 months from the date of coming into operation of the SED Regulations.

(2) Subject to sub-paragraph (3), where after the date of coming into operation of the SED Regulations abatement equipment is installed in an installation, the prescribed date for the affected part shall be the date on which the abatement equipment is installed if earlier than the date which would be the prescribed date for the SED installation under this Part.

(3) Where the abatement equipment is to be installed in an installation in respect of which the operator has made an application to use a reduction scheme, the prescribed date for the affected part shall be the determination date for that affected part.

17.—(1) Where –

(a)in accordance with the provisions of Part 4 of this Schedule the prescribed date for a Part B or Part C installation which carries out in whole or in part an SED activity is to be determined under this Part; and

(b)but for the provisions of Part 4 the operator would have been deemed to have made an application for a permit to operate that plant under paragraph 9(3) of Part 2 of this Schedule

the application to be made shall relate only to the SED installation and the operator shall be deemed to have made an application to operate the rest of the installation at the same date.

(2) Schedule 4 shall not apply to a deemed application under sub-paragraph (1).

(3) Where sub-paragraph (1) applies, the enforcing authority shall, within 1 month of the date on which the application is deemed to have been made, notify the operator of the installation of the deemed application and of the requirements of sub-paragraph (4).

(4) The enforcing authority shall give notice of its determination of a deemed application under sub-paragraph (1) to the applicant at the same time as it gives notice of its determination of the application relating to the SED installation.

18.—(1) Expressions used both in this Part and in the Solvent Emissions Directive have the same meaning for the purposes of this Part as they have for the Solvent Emissions Directive.

(2) In this Part –

“determination date” means –

(a)

for an SED installation or part of an SED installation, in relation to which a permit is granted, the date on which it is granted, whether in pursuance of the application, or, on an appeal, of a direction to grant it;

(b)

for an SED installation or part of an SED installation, in relation to which a permit is refused and the applicant for the permit appeals against the refusal, the date of the affirmation of the refusal;

(c)

for an SED installation or part of an SED installation, in relation to which a permit is refused and no appeal is made against the refusal, the date immediately following the last day, determined in accordance with paragraph 2 of Schedule 9, on which notice of appeal might have been given;

“existing SED installation” means –

(a)

an SED installation which was put into operation before 1st April 2001; or

(b)

an SED installation which was subject to a relevant approval on 1st April 2001 or to a full application for a relevant approval and was put into operation on or before 1st April 2002.

“new SED installation” means an SED installation which is put into operation on or after 1st April 2001, other than an existing SED installation.

PART 4application to parts 1 to 3

19.—(1) Parts 1 to 3 of this Schedule shall apply subject to the provisions of this Part.

(2) Where an installation is wholly an SED installation and only carries out activities which do not fall within sections 1.1 to 6.9 of Part 1 of Schedule 1 the prescribed date for that installation shall be determined in accordance with Part 3.

(3) Subject to the provisions of sub-paragraphs (4) to (6) below, the prescribed date for installations which carry out an activity falling within a description in sections 1.1 to 6.9 of Part 1 of Schedule 1 (and directly associated activities) shall be determined in accordance with Part 1 or 2.

(4) Subject to sub-paragraphs (5) and (6), where an SED installation carries out activities which are also wholly or partly activities falling within any description in sections 1.1 to 6.9 of Part 1 of Schedule 1 (and any directly associated activities), the prescribed date for that installation shall be determined in accordance with paragraphs 13 and 14 of Part 3 unless –

(a)the activities carried out by the SED installation fall wholly within any description set out in Schedule 1 to the 1998 Regulations under the heading “Part A, Part B or Part C” and are wholly covered by an authorisation granted under Article 6 of the 1997 Order;

(b)the anticipated prescribed date for the installation under Part 1 or 2 is earlier than the anticipated prescribed date for the SED installation under paragraph 13 or 14 of Part 3;

(c)an application to operate the installation has already been made or is already deemed to have been made at the date of coming into operation of the SED Regulations.

(5) Subject to sub-paragraph (6), where an installation –

(a)carries out an SED activity and directly associated activities which are only partly also activities falling within a description in sections 1.1 to 6.9 of Part 1 of Schedule 1 and directly associated activities; and

(b)falls within the exception in sub-paragraph (4)(b);

the installation shall be regarded, for the purposes of this Schedule, as if it were two separate installations one consisting of the part of the installation carrying out activities under sections 1.1 to 6.9 in Part 1 of Schedule 1 (and directly associated activities) for which the prescribed date shall be determined in accordance with Parts 1 or 2 and the other consisting of the remainder of the installation for which the prescribed date shall be determined in accordance with Part 3.

(6) Where sub-paragraph (5) applies the operator may apply in writing to the enforcing authority for consent to make an application at the earliest anticipated prescribed date covering the whole installation.

(7) Where an existing SED installation installs abatement equipment or undergoes a substantial change in operation, the prescribed date for the affected part shall be determined in accordance with paragraphs 15 or 16 of Part 3 unless –

(a)the prescribed date for the installation under Parts 1 or 2 or paragraphs 13 or 14 of Part 3 is earlier than the prescribed date for the affected part of the SED installation under paragraphs 15 or 16 of Part 3, or

(b)in relation to an SED installation which installs abatement equipment, the activities carried out by the affected part of the SED installation fall wholly within any description set out in Schedule 1 to the 1998 Regulations under the heading “Part A” and are wholly covered by an authorisation granted under Article 6 of the 1997 Order.

20.  In this Schedule –

“affected part” means that part of an SED installation which undergoes a substantial change in operation or in which abatement equipment is installed;

“anticipated prescribed date” means –

(a)

in relation to a prescribed date under Part 1 of this Schedule,

(i)

for new installations and mobile plant and for existing Part A installations and existing Part A mobile plant where there is a substantial change to the operation of the installation or mobile plant the last day of a period of 6 months from the last day for making an application for a permit under that Part;

(ii)

for existing Part A installations and Part A mobile plant other than those referred to in sub-paragraph (i), the last day of a period of 9 months from the last day for making an application for a permit under that Part;

(b)

in relation to a prescribed date for a deemed application under paragraph 3 of Part 2 of this Schedule, the last day of a period of 12 months from the relevant date specified in paragraph 10 of that Part;

(c)

in relation to a prescribed date under paragraphs 13 and 14 of Part 3,

(i)

for new installations and mobile plant and for existing Part A installations and existing Part A mobile plant where there is a substantial change to the operation of the installation or mobile plant the last day of a period of 6 months from the last day for making an application for a permit under that Part;

(ii)

for existing Part A installations and Part A mobile plant other than those referred to in sub-paragraph (i), the last day of a period of 9 months from the last day for making an application for a permit under that Part;

“existing SED installation” means –

(a)

an SED installation which was put into operation before 1st April 2001; or

(b)

an SED installation which was subject to a permit on 1st April 2001 or to a full application for a permit and was put into operation on or before 1st April 2002.

“the 1998 Regulations” means the Industrial Pollution Control (Prescribed Processes and Substances) Regulations (Northern Ireland) 1998(1);

“the SED Regulations” means the Solvent Emissions Regulations (Northern Ireland) 2004.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources