- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
(a)Any process not described in Part A of this Section for making, melting or refining iron, steel or any ferrous alloy where the designed holding capacity of molten metal is 5 tonnes or more.
(b)Any process for the refining or making of iron, steel or any ferrous alloy in which air or oxygen or both are used, if related to a process described in this Part of this Section.
(c)The desulphurisation of iron, steel or any ferrous alloy made by a process described in this Part of this Section.
(d)Heating iron, steel or any ferrous alloy (whether in a furnace or other appliance) to remove grease, oil or any other non-metallic contaminant (including such operations as the removal by heat of plastic or rubber covering from scrap cable), if related to another process described in this Part of this Section.
(e)Any foundry process (including ancillary foundry operations such as the manufacture and recovery of moulds, the reclamation of sand, fettling, grinding and shot-blasting) if related to another process described in this Part of this Section.
(f)Any process involving the casting of iron, steel or any ferrous alloy from deliveries of 50 tonnes or more at one time of molten metal.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: