- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
5. In the case of explosives in Division 1.1, 1.2 or 1.3 each placard referred to in paragraph 1(b) shall—
(a)be in the form of the following diagram (the Division number “1.2” and the Compatibility Group letter “E” are only examples);
(b)comply with the measurements in the diagram except that larger measurements may be used in which case the measurements shall be increased proportionally;
(c)have a pictograph of a bomb blast filling most of its upper half;
(d)have the Division number and Compatibility Group letter appropriate to the explosives being carried written in its lower half; and
(e)have the class number “1” written in its bottom corner below the Division number and Compatibility Group letter.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: