Commission Implementing Regulation (EU) 2018/249Show full title

ANNEX

a Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports
b Commission Regulation (EC) No 152/2009 of 27 January 2009 laying down the methods of sampling and analysis for the official control of feed (OJ L 54, 26.2.2009, p. 1).
Identification number of the additive	Name of the holder of authorisation	Additive	Composition, chemical formula, description, analytical method	Species or category of animal	Maximum age	Minimum content	Maximum content	Other provisions	End of period of authorisation
						mg of active substance/kg of complete feedingstuff with a moisture content of 12 %
Category: Sensory additives. Functional group: Flavouring compounds
2b16056	—	Taurine	Additive composition Taurine Characterisation of the active substance Taurine Produced by chemical synthesis or protein hydrolysis Purity: min. 98 % assay Chemical formula: C2H7O3NS CAS number 107-35-7 FLAVIS No 16.056 Method of analysis a For identification of taurine in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of taurine in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Commission Regulation (EC) No 152/2009b (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b17001	—	Beta-alanine	Additive composition Beta-alanine Characterisation of the active substance Beta-alanine Produced by chemical synthesis or protein hydrolysis Purity: min. 97 % assay Chemical formula: C3H7O2N CAS number 107-95-9 FLAVIS No 17.001 Method of analysis a For identification of beta-alanine in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of beta-alanine in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b17002	—	L-Alanine	Additive composition L-Alanine Characterisation of the active substance L-Alanine Produced by chemical synthesis or protein hydrolysis Purity: min. 98,5 % assay Chemical formula: C3H7NO2 CAS number 56-41-7 FLAVIS No 17.002 Method of analysis a For identification of L-Alanine in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of L-alanine in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b17003	—	L-Arginine	Additive composition L-Arginine Characterisation of the active substance L-Arginine Produced by chemical synthesis or protein hydrolysis Purity: min. 98 % assay Chemical formula: C6H14O2N4 CAS number 74-79-3 FLAVIS No 17.003 Method of analysis a For identification of L-arginine in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of L-arginine in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b17005	—	L-Aspartic acid	Additive composition L-Aspartic acid Characterisation of the active substance L-Aspartic acid Produced by chemical synthesis or protein hydrolysis Purity: min. 98 % assay Chemical formula: C4H7O4N CAS number 56-84-8 FLAVIS No 17.005 Method of analysis a For identification of L-aspartic acid in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of L-aspartic acid in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b17008	—	L-Histidine	Additive composition L-Histidine Characterisation of the active substance L-Histidine Produced by chemical synthesis or protein hydrolysis Purity: min. 98 % assay Chemical formula: C6H9O2N3 CAS number 71-00-1 FLAVIS No 17.008 Method of analysis a For identification of L-histidine in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of L-histidine in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b17010	—	D,L-Isoleucine	Additive composition D,L-Isoleucine Characterisation of the active substance D,L-Isoleucine Produced by chemical synthesis or protein hydrolysis Purity: min. 98 % assay Chemical formula: C6H13O2N CAS number 443-79-8 FLAVIS No 17.010 Method of analysis a For identification of D,L-isoleucine in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of D, L-isoleucine in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b17012	—	L-Leucine	Additive composition L-Leucine Characterisation of the active substance L-Leucine Produced by chemical synthesis or protein hydrolysis Purity: min. 98 % assay Chemical formula: C6H13O2N CAS number 61-90-5 FLAVIS No 17.012 Method of analysis a For identification of L-leucine in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of L-leucine in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b17018	—	L-Phenylalanine	Additive composition L-Phenylalanine Characterisation of the active substance L-Phenylalanine Produced by chemical synthesis or protein hydrolysis Purity: min. 98 % assay Chemical formula: C9H11O2N CAS number 63-91-2 FLAVIS No 17.018 Method of analysis a For identification of L-phenylalanine in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of L-phenylalanine in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b17019	—	L-Proline	Additive composition L-Proline Characterisation of the active substance L-Proline Produced by chemical synthesis or protein hydrolysis Purity: min. 98 % assay Chemical formula: C5H9O2N CAS number 147-85-3 FLAVIS No 17.019 Method of analysis a For identification of L-proline in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of L-proline in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b17020	—	D,L-Serine	Additive composition D,L-Serine Characterisation of the active substance D,L-Serine Produced by chemical synthesis or protein hydrolysis Purity: min. 95 % assay Chemical formula: C3H7NO3 CAS number 302-84-1 FLAVIS No 17.020 Method of analysis a For identification of D,L-serine in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of D, L-serine in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b17022	—	L-Tyrosine	Additive composition L-Tyrosine Characterisation of the active substance L-Tyrosine Produced by chemical synthesis or protein hydrolysis Purity: min. 98 % assay Chemical formula: C9H11O3N CAS number 60-18-4 FLAVIS No 17.022 Method of analysis a For identification of L-tyrosine in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of L-tyrosine in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b17027	—	L-Methionine	Additive composition L-Methionine Characterisation of the active substance L-Methionine Produced by chemical synthesis or protein hydrolysis Purity: min. 98,5 % assay Chemical formula: C5H11NO2S CAS number 63-68-3 FLAVIS No 17.027 Method of analysis a For identification of L-methionine in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of L-methionine in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b17028	—	L-Valine	Additive composition L-Valine Characterisation of the active substance L-Valine Produced by chemical synthesis or protein hydrolysis Purity: min. 98,5 % assay Chemical formula: C5H11NO2 CAS number 72-18-4 FLAVIS No 17.028 Method of analysis a For identification of L-valine in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of L-valine in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b17033	—	L-Cysteine	Additive composition L-Cysteine Characterisation of the active substance L-Cysteine Produced by chemical synthesis or protein hydrolysis Purity: min. 98 % assay Chemical formula: C3H7O2NS CAS number 52-90-4 FLAVIS No 17.033 Method of analysis a For identification of L-cysteine in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of L-cysteine in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b920	—	L-Cysteine hydrochloride monohydrate	Additive composition L-Cysteine hydrochloride monohydrate Characterisation of the active substance L-Cysteine hydrochloride monohydrate Produced by chemical synthesis or protein hydrolysis Purity: min. 98,5 % assay Chemical formula: C3H8ClNO2S · H2O CAS number 7048-04-6 Method of analysis a For identification of L-cysteine hydrochloride monohydrate in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of L-cysteine hydrochloride monohydrate in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species except cats and dogs	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg for all species except cats and dogs’. 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg for all species except cats and dogs. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b17034	—	Glycine	Additive composition Glycine Characterisation of the active substance Glycine Produced by chemical synthesis or protein hydrolysis Purity: min. 98 % assay Chemical formula: C2H5O2N CAS number 56-40-6 FLAVIS No 17.034 Method of analysis a For identification of glycine in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of glycine in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 20 g/kg for cats and dogs; 25 g/kg for other species and categories.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the levels referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 20 g/kg for cats and dogs; 25 g/kg for other species and categories. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b621	—	Monosodium glutamate	Additive composition Monosodium glutamate Characterisation of the active substance Monosodium glutamate Produced by chemical synthesis or protein hydrolysis Purity: min. 99 % assay Chemical formula: C5H8 NaNO4 · H2O CAS number 142-47-2 Method of analysis a For identification of monosodium glutamate in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of monosodium glutamate in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028
2b620	—	L-Glutamic acid	Additive composition L-Glutamic acid Characterisation of the active substance L-Glutamic acid Produced by chemical synthesis or protein hydrolysis Purity: min. 98 % assay Chemical formula: C5H9O4N CAS number 56-86-0 Method of analysis a For identification of L-glutamic acid in premixtures of flavourings: Ion-exchange chromatography with post column ninhydrin derivatisation (Ph.Eur. 6.6-2.2.56-Method 1). For the determination of L-glutamic acid in premixtures: Ion-exchange chromatography with post column ninhydrin derivatisation and photometric detection: based on Regulation (EC) No 152/2009 (Annex III, part F).	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg. 6. For additives produced from hydrolysis of animal protein, the animal species shall be indicated on the label of the additive and premixtures. 7. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.	15.3.2028