Commission Implementing Regulation (EU) 2017/62Show full title

ANNEX

a Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports
Identification number of the additive	Name of the holder of authorisation	Additive	Composition, chemical formula, description, analytical method	Species or category of animal	Maximum age	Minimum content	Maximum content	Other provisions	End of period of authorisation
						mg of active substance/kg of complete feedingstuff with a moisture content of 12 %
(1)	(2)	(3)	(4)	(5)	(6)	(7)		(8)	(9)
Category: Sensory additives. Functional group: Flavouring compounds
2b12001	—	3-(Methylthio)propionaldehyde	Additive composition 3-(Methylthio) propionaldehyde Characterisation of the active substance 3-(Methylthio) propionaldehyde Produced by chemical synthesis Purity: min. 98 % Chemical formula: C4H8OS CAS number 3268-49-3 FLAVIS No 12.001 Method of analysis a For the determination of 3-(methylthio) propionaldehyde in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12002	—	Methyl 3-(methylthio)propionate	Additive composition Methyl 3-(methylthio)propionate Characterisation of the active substance Methyl 3-(methylthio)propionate Produced by chemical synthesis Purity: min. 97 % Chemical formula: C5H10O2S CAS number 13532-18-8 FLAVIS No 12.002 Method of analysis a For the determination of methyl 3-(methylthio)propionate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12004	—	Allylthiol	Additive composition Allylthiol Characterisation of the active substance Allylthiol Produced by chemical synthesis Purity: min. 75 % (min. 98 % allylthiol + allyl sulphide + allyl mercaptan) Chemical formula: C3H6S CAS number 870-23-5 FLAVIS No 12.004 Method of analysis a For the determination of allylthiol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12006	—	Dimethyl sulfide	Additive composition Dimethyl sulfide Characterisation of the active substance Dimethyl sulfide Produced by chemical synthesis Purity: min. 95 % Chemical formula: C2H6S CAS number 75-18-3 FLAVIS No 12.006 Method of analysis a For the determination of dimethyl sulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12007	—	Dibutyl sulfide	Additive composition Dibutyl sulfide Characterisation of the active substance Dibutyl sulfide Produced by chemical synthesis Purity: min. 95 % Chemical formula: C8H18S CAS number 544-40-1 FLAVIS No 12.007 Method of analysis a For the determination of dibutyl sulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12008	—	Diallyl disulfide	Additive composition Diallyl disulfide Characterisation of the active substance Diallyl disulfide Produced by chemical synthesis Purity: min. 80 % (min. 98 % diallyl disulphide +allyl sulphide + allyl mercaptan) Chemical formula: C6H10S2 CAS number 2179-57-9 FLAVIS No 12.008 Method of analysis a For the determination of diallyl disulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12009	—	Diallyl trisulfide	Additive composition Diallyl trisulfide Characterisation of the active substance Diallyl trisulfide Produced by chemical synthesis Purity: min. 65 % (min.95 % allyl di-, tri- and tetra sulfides) Chemical formula: C6H10S3 CAS number 2050-87-5 FLAVIS No 12.009 Method of analysis a For the determination of diallyl trisulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12013	—	Dimethyl trisulfide	Additive composition Dimethyl trisulfide Characterisation of the active substance Dimethyl trisulfide Produced by chemical synthesis Purity: min. 97 % Chemical formula: C2H6S3 CAS number 3658-80-8 FLAVIS No 12.013 Method of analysis a For the determination of dimethyl trisulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12014	—	Dipropyl disulfide	Additive composition Dipropyl disulfide Characterisation of the active substance Dipropyl disulfide Produced by chemical synthesis Purity: min. 98 % Chemical formula: C6H14S2 CAS number 629-19-6 FLAVIS No 12.014 Method of analysis a For the determination of dipropyl disulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12025	—	Allyl isothiocyanate	Additive composition Allyl isothiocyanate Characterisation of the active substance Allyl isothiocyanate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C4H5NS CAS number 57-06-7 FLAVIS No 12.025 Method of analysis a For the identification of allyl isothiocyanate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	0,05	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12026	—	Dimethyl disulfide	Additive composition Dimethyl disulfide Characterisation of the active substance Dimethyl disulfide Produced by chemical synthesis Purity: min. 97 % Chemical formula: C2H6S2 CAS number 624-92-0 FLAVIS No 12.026 Method of analysis a For the determination of dimethyl disulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12027	—	2-Methylbenzene-1-thiol	Additive composition 2-Methylbenzene-1-thiol Characterisation of the active substance 2-Methylbenzene-1-thiol Produced by chemical synthesis Purity: min. 95 % Chemical formula: C7H8S CAS number 137-06-4 FLAVIS No 12.027 Method of analysis a For the determination of 2-methylbenzene-1-thiol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12032	—	S-Methyl butanethioate	Additive composition S-Methyl butanethioate Characterisation of the active substance S-Methyl butanethioate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C5H10OS CAS number 2432-51-1 FLAVIS No 12.032 Method of analysis a For the determination of S-methyl butanethioate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12037	—	Allyl methyl disulfide	Additive composition Allyl methyl disulfide Characterisation of the active substance Allyl methyl disulfide Produced by chemical synthesis Purity: min. 90 % Chemical formula: C4H8S2 CAS number 2179-58-0 FLAVIS No 12.037 Method of analysis a For the determination of allyl methyl disulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12062	—	3-(Methylthio)propan-1-ol	Additive composition 3-(Methylthio)propan-1-ol Characterisation of the active substance 3-(Methylthio)propan-1-ol Produced by chemical synthesis Purity: min. 98 % Chemical formula: C4H10OS CAS number 505-10-2 FLAVIS No 12.062 Method of analysis a For the determination of 3-(methylthio)propan-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12063	—	3-(Methylthio)hexan-1-ol	Additive composition 3-(Methylthio)hexan-1-ol Characterisation of the active substance 3-(Methylthio)hexan-1-ol Produced by chemical synthesis Purity: min. 97 % Chemical formula: C7H16OS CAS number 51755-66-9 FLAVIS No 12.063 Method of analysis a For the determination of 3-(methylthio)hexan-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12071	—	1-Propane-1-thiol	Additive composition 1-Propane-1-thiol Characterisation of the active substance 1-Propane-1-thiol Produced by chemical synthesis Purity: min. 97 % Chemical formula: C3H8S CAS number 107-03-9 FLAVIS No 12.071 Method of analysis a For the determination of 1-propane-1-thiol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12088	—	Diallyl sulfide	Additive composition Diallyl sulfide Characterisation of the active substance Diallyl sulfide Produced by chemical synthesis Purity: min. 97 % Chemical formula: C6H10S CAS number 592-88-1 FLAVIS No 12.088 Method of analysis a For the determination of diallyl sulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12118	—	2,4-Dithiapentane	Additive composition 2,4-Dithiapentane Characterisation of the active substance 2,4-Dithiapentane Produced by chemical synthesis Purity: min. 99 % Chemical formula: C3H8S2 CAS number 1618-26-4 FLAVIS No 12.118 Method of analysis a For the determination of 2,4-dithiapentane in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12168	—	2-Methyl-2-(methyldithio) propanal	Additive composition 2-Methyl-2-(methyldithio)propanal Characterisation of the active substance 2-Methyl-2-(methyldithio)propanal Produced by chemical synthesis Purity: min. 95 % Chemical formula: C5H10OS2 CAS number 67952-60-7 FLAVIS No 12.168 Method of analysis a For the determination of 2-methyl-2-(methyldithio) propanal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12173	—	2-Methylpropane-1-thiol	Additive composition 2-Methylpropane-1-thiol Characterisation of the active substance 2-Methylpropane-1-thiol Produced by chemical synthesis Purity: min. 97 % Chemical formula: C4H10S CAS number 513-44-0 FLAVIS No 12.173 Method of analysis a For the identification of 2-methylpropane-1-thiol in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	0,04	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12175	—	Methylsulfinyl methane	Additive composition Methylsulfinylmethane Characterisation of the active substance Methylsulfinylmethane Produced by chemical synthesis Purity: min. 99 % Chemical formula: C2H6OS CAS number 67-68-5 FLAVIS No 12.175 Method of analysis a For the determination of methylsulfinylmethane in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b12197	—	Propane-2-thiol	Additive composition Propane-2-thiol Characterisation of the active substance Propane-2-thiol Produced by chemical synthesis Purity: min. 98 % Chemical formula: C3H8S CAS number 75-33-2 FLAVIS No 12.197 Method of analysis a For the determination of propane-2-thiol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b15025	—	3,5-Dimethyl-1,2,4-trithiolane	Additive composition 3,5-Dimethyl-1,2,4-trithiolane Characterisation of the active substance 3,5-Dimethyl-1,2,4-trithiolane Produced by chemical synthesis Purity: min. 90 % Secondary components: diethyl trisulphide, dimethylbenzylcarbinol, N,N-dimethyl-ethanethioamide, 4,6-dimethyl1,2,3,5-tetracyclohexane, 3-methyl-1,2,4-trithiolane, 2-methyl-4-propyl 1,3-oxathiane Chemical formula: C4H8S3 CAS number 23654-92-4 FLAVIS No 15.025 Method of analysis a For the determination of 3,5-dimethyl-1,2,4-trithiolane in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027
2b16030	—	2-Methyl-4-propyl-1,3-oxathiane	Additive composition 2-Methyl-4-propyl-1,3-oxathiane Characterisation of the active substance 2-Methyl-4-propyl-1,3-oxathiane Produced by chemical synthesis Purity: min. 98 % Chemical formula: C8H16OS CAS number 67715-80-4 FLAVIS No 16.030 Method of analysis a For the determination of 2-methyl-4-propyl-1,3-oxathiane in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’. 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.	6 February 2027