- Latest available (Revised)
- Original (As adopted by EU)
Commission Delegated Regulation (EU) No 3/2014Show full title
Commission Delegated Regulation (EU) No 3/2014 of 24 October 2013 supplementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to vehicle functional safety requirements for the approval of two- or three-wheel vehicles and quadricycles (Text with EEA relevance)
You are here:
What Version
More Resources
Revised version PDFs
- Revised 16/10/20166.74 MB
Legislation originating from the EU
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
This item of legislation originated from the EU
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Status:
This is the original version as it was originally adopted in the EU.
This legislation may since have been updated - see the latest available (revised) version
4.Speed capacity
4.1.Every tyre with which the vehicle is normally fitted shall bear a speed category symbol.
4.1.1.The speed category symbol shall be compatible with the maximum design vehicle speed.
4.1.1.1.The speed category as indicated in the information document shall be the lowest grade which is compatible with the maximum design vehicle speed. Tyres with a higher grade may be fitted.
4.1.2.In the case of tyres of speed categories V, W, Y and Z, the adjusted load rating as specified in the relevant Directive, EU Regulation or UNECE regulation shall be taken into account.
4.1.3.In the case of tyres of class C2 or C3, the adjusted load rating specified in point 2.29 of UNECE regulation No 54 shall be taken into account.
4.2.The requirements of point 4.1.1 to 4.1.3 shall not apply in the following situations:
4.2.1.In the case of temporary-use spare units.
4.2.2.In the case of vehicles normally equipped with ordinary tyres and occasionally fitted with snow tyres, where the speed category symbol of the snow tyre shall correspond to a speed either greater than the maximum design vehicle speed or not less than 130 km/h (or both). However, if the maximum design vehicle speed is greater than the speed corresponding to the lowest speed category symbol of the fitted snow tyres, a maximum speed warning label, specifying the lowest value of the maximum speed capability of the fitted snow tyres, shall be displayed inside the vehicle in a prominent position or, if the vehicle does not have an interior, as close as possible to the instrument cluster, readily and permanently visible to the driver.
4.3.The relevant information shall be stated clearly in the vehicle’s instruction manual in order to ensure that suitable replacement tyres with an appropriate speed capacity are fitted when necessary once the vehicle has been put into service.
Options/Help
Print Options
PrintThe Whole Regulation
PrintThe Whole Annex
PrintThis Division only
You have chosen to open the Whole Regulation
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
You have chosen to open Schedules only
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the EU Official Journal
- lists of changes made by and/or affecting this legislation item
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.