Commission Delegated Regulation (EU) No 812/2013Show full title

ANNEX VI U.K. [F1 Information to be provided in the cases where end-users cannot be expected to see the product displayed, except on the internet]

Textual Amendments

F1 Substituted by Commission Delegated Regulation (EU) No 518/2014 of 5 March 2014 amending Commission Delegated Regulations (EU) No 1059/2010, (EU) No 1060/2010, (EU) No 1061/2010, (EU) No 1062/2010, (EU) No 626/2011, (EU) No 392/2012, (EU) No 874/2012, (EU) No 665/2013, (EU) No 811/2013 and (EU) No 812/2013 with regard to labelling of energy-related products on the internet (Text with EEA relevance).

1. WATER HEATERS U.K.

1.1. The information referred to in Article 4(1)(b) shall be provided in the following order: U.K.

(a)

the declared load profile, expressed by the appropriate letter and typical usage in accordance with Table 3 of Annex VII;

(b)

the water heating energy efficiency class of the model, under average climate conditions, in accordance with point 1 of Annex II;

(c)

the water heating energy efficiency in %, under average climate conditions, rounded to the nearest integer and calculated in accordance with point 3 of Annex VIII;

(d)

the annual electricity consumption in kWh in terms of final energy and/or the annual fuel consumption in GJ in terms of GCV, under average climate conditions, rounded to the nearest integer and calculated in accordance with point 4 of Annex VIII;

(e)

the sound power level, indoors, in dB, rounded to the nearest integer (for heat pump water heaters, if applicable);

in addition, for solar water heaters and heat pump water heaters:

(f)

the water heating energy efficiency in %, under colder and warmer climate conditions, rounded to the nearest integer and calculated in accordance with point 3 of Annex VIII;

(g)

the annual electricity consumption in kWh in terms of final energy and/or the annual fuel consumption in GJ in terms of GCV, under colder and warmer climate conditions, rounded to the nearest integer and calculated in accordance with point 4 of Annex VIII;

in addition, for solar water heaters:

(h)

the collector aperture area in m², to two decimal places;

(i)

the storage volume in litres, rounded to the nearest integer;

in addition, for heat pump water heaters:

(j)

the sound power level, outdoors, in dB, rounded to the nearest integer.

1.2. Where other information contained in the product fiche is also provided, it shall be in the form and order specified in point 1 of Annex IV. U.K.

1.3. The size and font in which the information referred in points 1.1 and 1.2 is printed or shown shall be legible. U.K.

2. HOT WATER STORAGE TANKS U.K.

2.1. The information referred to in Article 4(2)(b) shall be provided in the following order: U.K.

(a)

the energy efficiency class of the model, determined in accordance with point 2 of Annex II;

(b)

the standing loss in W, rounded to the nearest integer;

(c)

the storage volume in litres, rounded to the nearest integer.

2.2. The size and font in which the information referred in point 2.1 is printed or shown shall be legible. U.K.

3. PACKAGES OF WATER HEATER AND SOLAR DEVICE U.K.

3.1. The information referred to in Article 4(3)(b) shall be provided in the following order: U.K.

(a)

the water heating energy efficiency class of the model, determined in accordance with point 1 of Annex II;

(b)

the water heating energy efficiency in %, rounded to the nearest integer;

(c)

the elements set out in Figure 1 of Annex IV.

3.2. The size and font in which the information referred in point 3.1 is printed or shown shall be legible. U.K.