- Latest available (Revised)
- Original (As adopted by EU)
Commission Delegated Regulation (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of water heaters, hot water storage tanks and packages of water heater and solar device (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
This is the original version as it was originally adopted in the EU.
This legislation may since have been updated - see the latest available (revised) version
The following information shall be included in the label:
supplier’s name or trade mark;
supplier’s model identifier;
the water heating function, including the declared load profile expressed as the appropriate letter in accordance with Table 3 of Annex VII;
the water heating energy efficiency class, determined in accordance with point 1 of Annex II; the head of the arrow containing the water heating energy efficiency class of the water heater shall be placed at the same height as the head of the relevant energy efficiency class;
the annual electricity consumption in kWh in terms of final energy and/or the annual fuel consumption in GJ in terms of GCV, rounded to the nearest integer and calculated in accordance with point 4 of Annex VIII;
the sound power level LWA , indoors, in dB, rounded to the nearest integer;
for conventional water heaters able to work only during off-peak hours, the pictogram referred to in point 4(d)(10) of this Annex may be added.
The design aspects of the label for conventional water heaters shall be in accordance with point 4 of this Annex.
The following information shall be included in the label:
supplier’s name or trade mark;
supplier’s model identifier;
the water heating function, including the declared load profile expressed as the appropriate letter in accordance with Table 3 of Annex VII;
the water heating energy efficiency class under average climate conditions, determined in accordance with point 1 of Annex II; the head of the arrow containing the water heating energy efficiency class of the water heater shall be placed at the same height as the head of the relevant energy efficiency class;
the annual electricity consumption in kWh in terms of final energy or the annual fuel consumption in GJ in terms of GCV, under average, colder and warmer climate conditions, rounded to the nearest integer and calculated in accordance with point 4 of Annex VIII;
European solar map displaying three indicative global solar irradiance zones;
the sound power level LWA , indoors, in dB, rounded to the nearest integer.
The design aspects of the label for solar water heaters shall be in accordance with point 5 of this Annex.
The following information shall be included in the label:
supplier’s name or trade mark;
supplier’s model identifier;
the water heating function, including the declared load profile expressed as the appropriate letter in accordance with Table 3 of Annex VII;
the water heating energy efficiency class under average climate conditions, determined in accordance with point 1 of Annex II; the head of the arrow containing the water heating energy efficiency class of the water heater shall be placed at the same height as the head of the relevant energy efficiency class;
the annual electricity consumption in kWh in terms of final energy and/or the annual fuel consumption in GJ in terms of GCV, under average, colder and warmer climate conditions, rounded to the nearest integer and calculated in accordance with point 4 of Annex VIII;
European temperature map displaying three indicative temperature zones;
the sound power level LWA , indoors (if applicable) and outdoors, in dB, rounded to the nearest integer;
for heat pump water heaters able to work only during off-peak hours, the pictogram referred to in point 6(d)(11) of this Annex may be added.
The design aspects of the label for heat pump water heaters shall be in accordance with point 6 of this Annex. By way of exception, where a model has been granted an ‘EU Ecolabel’ under Regulation (EC) No 66/2010 of the European Parliament and of the Council(1), a copy of the EU Ecolabel may be added.
The information listed in point 1.1.1(a) of this Annex shall be included in the label.
The design aspects of the label for conventional water heaters shall be in accordance with point 4 of this Annex.
The information listed in point 1.1.2(a) of this Annex shall be included in the label.
The design aspects of the label for solar water heaters shall be in accordance with point 5 of this Annex.
The information listed in point 1.1.3(a) of this Annex shall be included in the label.
The design aspects of the label for heat pump water heaters shall be in accordance with point 6 of this Annex.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: