Commission Delegated Regulation (EU) No 811/2013Show full title

4. SOLAR DEVICES

For solar devices, the technical documentation referred to in Article 3(4)(b) shall include:

(a)

the name and address of the supplier;

(b)

a description of the solar device model sufficient for its unambiguous identification;

(c)

where appropriate, the references of the harmonised standards applied;

(d)

where appropriate, the other technical standards and specifications used;

(e)

the identification and signature of the person empowered to bind the supplier;

(f)

technical parameters (for pumps in the collector loop if applicable):

• the collector aperture area A_sol in m², to two decimal places;

• the collector efficiency η_col in %, rounded to the nearest integer;

• the energy efficiency class of the solar hot water storage tank, determined in accordance with point 3 of Annex II;

• the standing loss S of the solar hot water storage tank in W, rounded to the nearest integer;

• the storage volume V of the solar hot water storage tank in litres and m³;

• the annual non-solar heat contribution Q_nonsol in kWh in terms of primary energy for electricity and/or in kWh in terms of GCV for fuels, for the load profiles M, L, XL and XXL under average climate conditions, rounded to the nearest integer;

• the pump power consumption solpump in W, rounded to the nearest integer;

• the standby power consumption solstandby in W, to two decimal places;

• the annual auxiliary electricity consumption Q_aux in kWh in terms of final energy, rounded to the nearest integer;

(g)

any specific precautions that shall be taken when the solar device is assembled, installed or maintained.