Commission Regulation (EU) No 65/2012Show full title

Article 4 EC type-approval

1. Manufacturers shall ensure that vehicles placed on the market, which are covered by Article 11 of Regulation (EC) No 661/2009, are equipped with GSI in accordance with the requirements of Annex I to this Regulation.

2. To obtain an EC type-approval for the vehicles covered by Article 11 of Regulation (EC) No 661/2009, the manufacturer shall fulfil the following obligations:

(a) draw up and submit to the type-approval authority an information document in accordance with the model set out in Part 1 of Annex II to this Regulation;

(b) submit to the type-approval authority a declaration laying down that, according to the manufacturer’s assessment, the vehicle complies with the requirements set out in this Regulation;

(c) present to the type-approval authority a certificate established in accordance with the model set out in Part 2 of Annex II to this Regulation;

(d) either

(i)

submit to the type-approval authority the GSI gear shift points determined analytically as provided for in the last paragraph of point 4.1 to Annex I; or

(ii)

submit to the technical service responsible for conducting the type-approval tests a vehicle which is representative of the vehicle type to be approved to enable the test described in point 4 of Annex I to be carried out.

3. Based on the elements provided by the manufacturer under points (a), (b) and (c) of paragraph 2 and the results of the type-approval test referred to in point (d) of paragraph 2, the type-approval authority shall assess compliance with the requirements of Annex I.

It shall issue an EC type-approval certificate according to the model set out in Part 3 of Annex II to this Regulation for the vehicles covered by Article 11 of Regulation (EC) No 661/2009 only if such compliance is established.