Commission Regulation (EU) No 73/2010Show full title

CHAPTER III QUALITY, SAFETY AND SECURITY MANAGEMENT REQUIREMENTS

Article 10 Management requirements

1. Without prejudice to Regulation (EC) No 2096/2005, the parties referred to in Article 2(2) shall implement and maintain a quality management system covering their aeronautical data and aeronautical information provision activities, in accordance with the requirements laid down in Annex VII, Part A.

2. The parties referred to in Article 2(2) shall ensure that the quality management system referred to in paragraph 1 of this Article defines procedures to meet the safety management objectives laid down in Annex VII, Part B and the security management objectives laid down in Annex VII, Part C.

3. The parties referred to in Article 2(2) shall ensure that any changes to the existing systems referred to in the first subparagraph of Article 2(1) or the introduction of new systems are preceded by a safety assessment, including hazard identification, risk assessment and mitigation, conducted by the parties concerned.

4. During that safety assessment, the requirements referred to in Article 7(3), Annex I, Annex II and points 1 and 2 of Part A of Annex IV shall be considered as safety requirements and shall be taken into consideration, as a minimum.