- Latest available (Revised)
- Original (As adopted by EU)
Commission Delegated Regulation (EU) No 1061/2010Show full title
Commission Delegated Regulation (EU) No 1061/2010 of 28 September 2010 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household washing machines (Text with EEA relevance)
You are here:
What Version
Advanced Features
- Show Geographical Extent(e.g. England, Wales, Scotland and Northern Ireland)
- Show Timeline of Changes
More Resources
Revised version PDFs
- Revised 09/08/20201.54 MB
- Revised 07/03/20171.53 MB
- Revised 06/06/20141.97 MB
- Revised 20/12/20102.13 MB
This is a Regulation originating from the EU
This is a legislation item that originated from the EU
After exit day there will be three versions of this legislation to consult for different purposes. The legislation.gov.uk version is the version that applies in the UK. The EU Version currently on EUR-lex is the version that currently applies in the EU i.e you may need this if you operate a business in the EU.
The web archive version is the official version of this legislation item as it stood on exit day before being published to legislation.gov.uk and any subsequent UK changes and effects applied. The web archive also captured associated case law and other language formats from EUR-Lex.
Changes over time for: ANNEX V
Changes to legislation:
There are outstanding changes not yet made to Commission Delegated Regulation (EU) No 1061/2010. Any changes that have already been made to the legislation appear in the content and are referenced with annotations.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
Changes and effects yet to be applied to Annex V:
- Regulation revoked by S.I. 2020/1528 reg. 28(c)
- Annex 5 word substituted by S.I. 2019/539 Sch. 5 para. 3(9)(d)(i)
- Annex 5 word substituted by S.I. 2019/539 Sch. 5 para. 3(9)(d)(ii)
- Annex 5 words substituted by S.I. 2019/539 Sch. 5 para. 3(9)(a)
- Annex 5 words substituted by S.I. 2019/539 Sch. 5 para. 3(9)(c)
- Annex 5 words substituted in earlier amending provision S.I. 2019/539, Sch. 5 para. 3(9)(a) by S.I. 2020/1528 reg. 6(1)reg. 6(2)(c)(iii)
- Annex 5 words substituted in earlier amending provision S.I. 2019/539, Sch. 5 para. 3(9)(c) by S.I. 2020/1528 reg. 6(3)reg. 6(4)(e)(iii)
Changes and effects yet to be applied to the whole legislation item and associated provisions
- Signature words omitted by S.I. 2019/539 Sch. 5 para. 3(5)
- Annex 1 para. 1 image substituted by S.I. 2020/1528 Sch. 5 para. 4(2)
- Annex 1 para. 2 image substituted by S.I. 2020/1528 Sch. 5 para. 4(3)(a)
- Annex 1 s. 1(2) words inserted by S.I. 2019/539 Sch. 5 para. 3(6)
- Annex 1 para. 2(d) words omitted by S.I. 2020/1528 Sch. 5 para. 4(3)(b)(iii)
- Annex 1 para. 2(d) words substituted by S.I. 2020/1528 Sch. 5 para. 4(3)(b)(i)
- Annex 1 para. 2(d) words substituted by S.I. 2020/1528 Sch. 5 para. 4(3)(b)(ii)
- Annex 1 s. 1(2) words substituted in earlier amending provision S.I. 2019/539, Sch. 5 para. 3(6) by S.I. 2020/1528 reg. 4
- Annex 5(7) omitted by S.I. 2019/539 Sch. 5 para. 3(9)(b)
- Annex 3 para. 1(c) word substituted by S.I. 2019/539 Sch. 5 para. 3(8)
- Annex 2 para. 1(e) words inserted by S.I. 2019/539 Sch. 5 para. 3(7)
- Annex 2 para. 1(e) words substituted in earlier amending provision S.I. 2019/539, Sch. 5 para. 3(7) by S.I. 2020/1528 reg. 4
- Art. 3(c) words substituted by S.I. 2019/539 Sch. 5 para. 3(2)
- Art. 3(c) words substituted in earlier amending provision S.I. 2019/539, Sch. 5 para. 3(2) by S.I. 2020/1528 reg. 6(1)reg. 6(2)(c)(iii)
[F1ANNEX V U.K. Product compliance verification by market surveillance authorities
Textual Amendments
F1 Substituted by Commission Delegated Regulation (EU) 2017/254 of 30 November 2016 amending Delegated Regulations (EU) No 1059/2010, (EU) No 1060/2010, (EU) No 1061/2010, (EU) No 1062/2010, (EU) No 626/2011, (EU) No 392/2012, (EU) No 874/2012, (EU) No 665/2013, (EU) No 811/2013, (EU) No 812/2013, (EU) No 65/2014, (EU) No 1254/2014, (EU) 2015/1094, (EU) 2015/1186 and (EU) 2015/1187 with regard to the use of tolerances in verification procedures (Text with EEA relevance).
The verification tolerances set out in this Annex relate only to the verification of the measured parameters by Member State authorities and shall not be used by the supplier as an allowed tolerance to establish the values in the technical documentation. The values and classes on the label or in the product fiche shall not be more favourable for the supplier than the values reported in the technical documentation.
When verifying the compliance of a product model with the requirements laid down in this Delegated Regulation, for the requirements referred to in this Annex, the authorities of the Member States shall apply the following procedure:
(1)
The Member State authorities shall verify one single unit of the model.
(2)
The model shall be considered to comply with the applicable requirements if:
(a)
the values given in the technical documentation pursuant to Article 5(b) of Directive 2010/30/EU (declared values), and, where applicable, the values used to calculate these values, are not more favourable for the supplier than the corresponding values given in the test reports pursuant to point (iii) of the abovementioned Article; and
(b)
the values published on the label and in the product fiche are not more favourable for the supplier than the declared values, and the indicated energy efficiency class is not more favourable for the supplier than the class determined by the declared values; and
(c)
when the Member State authorities test the unit of the model, the determined values (the values of the relevant parameters as measured in testing and the values calculated from these measurements) comply with the respective verification tolerances as given in Table 1.
(3)
If the results referred to in points 2(a) or (b) are not achieved, the model and all models that have been listed as equivalent household washing machine models in the supplier's technical documentation shall be considered not to comply with this Delegated Regulation.
(4)
If the result referred to in point 2(c) is not achieved, the Member State authorities shall select three additional units of the same model for testing. As an alternative, the three additional units selected may be of one or more different models that have been listed as equivalent models in the supplier's technical documentation.
(5)
The model shall be considered to comply with the applicable requirements if for these three units, the arithmetical mean of the determined values complies with the respective tolerances given in Table 1.
(6)
If the result referred to in point 5 is not achieved, the model and all models that have been listed as equivalent household washing machine models in the supplier's technical documentation shall be considered not to comply with this Delegated Regulation.
(7)
The Member State authorities shall provide all relevant information to the authorities of the other Member States and to the Commission without delay after a decision being taken on the non-compliance of the model according to points 3 and 6.
Member States' authorities shall use measurement procedures which take into account the generally recognised, state-of-the-art, reliable, accurate and reproducible measurement methods, including methods set out in documents whose reference numbers have been published for that purpose in the Official Journal of the European Union . The Member State authorities shall use the measurement and calculation methods set out in Annex VII.
The Member State authorities shall only apply the verification tolerances that are set out in Table 1 and shall only use the procedure described in points 1 to 7 for the requirements referred to in this Annex. No other tolerances, such as those set out in harmonised standards or in any other measurement method, shall be applied.
Table 1
Verification tolerances
| Parameters | Verification tolerances |
|---|---|
| Annual energy consumption ( AE C ) | The determined value shall not exceed the declared value of AE C by more than 10 %. |
| Energy consumption ( E t ) | The determined value shall not exceed the declared value of E t by more than 10 %. Where three additional units need to be selected, the arithmetic mean of the determined values of these three units shall not exceed the declared value of E t by more than 6 %. |
| Programme time ( T t ) | The determined value shall not exceed the declared values T t by more than 10 %. |
| Water consumption ( W t ) | The determined value shall not exceed the declared value of W t by more than 10 %. |
| Remaining moisture content ( D ) | The determined value shall not exceed the declared value of D by more than 10 %. |
| Spin speed | The determined value shall not be less than the declared value by more than 10 %. |
| Power consumption in off mode and left-on mode ( P o and P l ) | Determined values of power consumption P o and P l of more than 1,00 W shall not exceed the declared values of P o and P l by more than 10 %. The determined values of power consumption P o and P l of less than or equal to 1,00 W shall not exceed the declared values of P o and P l by more than 0,10 W. |
| Duration of the left-on mode ( T l ) | The determined value shall not exceed the declared value of T l by more than 10 %. |
| Airborne acoustical noise emissions | The determined value shall meet the declared value.] |
Options/Help
Print Options
PrintThe Whole Regulation
PrintThis Annex only
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
See additional information alongside the content
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the EU Official Journal
- lists of changes made by and/or affecting this legislation item
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
Timeline of Changes
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.