Search Legislation

Advanced Search

Commission Regulation (EC) No 692/2008Show full title

Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (Text with EEA relevance)

Help about what version

What Version

  • Latest available (Revised)
  • Original (As adopted by EU)
Help about advanced features

Advanced Features

Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

This item of legislation originated from the EU

Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).

Changes to legislation:

This version of this Regulation was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

Appendix 3MODELINFORMATION DOCUMENT No …

relating to EC type-approval of a vehicle with regard to emissions and access to vehicle repair and maintenance informationU.K.

The following information, if applicable, must be supplied in triplicate and include a list of contents. Any drawings must be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, must show sufficient detail.

If the systems, components or separate technical units have electronic controls, information concerning their performance must be supplied.

0.GENERALU.K.

0.1.Make (trade name of manufacturer):U.K.
0.2.

Type:U.K.

0.2.1.Commercial name(s), if availableU.K.
0.3.

Means of identification of type, if marked on the vehicle(1) (2) U.K.

0.3.1.Location of that marking:U.K.
0.4.Category of vehicle(3):U.K.
0.5.Name and address of manufacturer:U.K.
0.8.Name(s) and address(es) of assembly plant(s):U.K.
0.9.Name and address of the manufacturer’s representative (if any)U.K.

1.GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLEU.K.

1.1.Photographs and/or drawings of a representative vehicle:U.K.
1.3.3.Powered axles (number, position, interconnection):U.K.

2.MASSES AND DIMENSIONS(4) (in kg and mm)U.K.

(Refer to drawing where applicable)U.K.

2.6.Mass of the vehicle with bodywork and, in the case of the towing vehicle of a category other than M1, with coupling device, if fitted by the manufacturer, in running order, or mass of the chassis or chassis with cab, without bodywork and/or coupling device if the manufacturer does not fit the bodywork and/or coupling device (including liquids, tools, spare wheel, if fitted, and driver and, for buses and coaches, a crew member if there is a crew seat in the vehicle)(5) (maximum and minimum for each variant):U.K.
2.8.Technically permissible maximum laden mass stated by the manufacturer(6) (7) U.K.
[F12.17. Vehicle submitted to multi-stage type-approval (only in the case of incomplete or completed vehicles of category N 1 within the scope of Regulation (EC) No 715/2007): yes/no (1) U.K.
2.17.1. Mass of the base vehicle in running order: kg U.K.
2.17.2. Default added mass, calculated in accordance with Section 5 of Annex XII to Regulation (EC) No 692/2008: … kg] U.K.

Textual Amendments

[F23. PROPULSION ENERGY CONVERTER (k) U.K.

3.1.

Manufacturer of the propulsion energy converter(s): U.K.

3.1.1. Manufacturer's code (as marked on the propulsion energy converter or other means of identification):] U.K.
3.2.

Internal combustion engineU.K.

3.2.1.1.Working principle: positive ignition/compression ignition(1) …U.K.

four stroke/two stroke/rotary cycle(1) …

3.2.1.2.

Number and arrangement of cylinders:U.K.

3.2.1.2.1.Bore(8): mmU.K.
3.2.1.2.2.Stroke(8): mmU.K.
3.2.1.2.3.Firing order:U.K.
3.2.1.3.Engine capacity (s): … cm3 U.K.
3.2.1.4.Volumetric compression ratio(9) U.K.
3.2.1.5.Drawings of combustion chamber, piston crown and, in the case of positive ignition engine, piston rings:U.K.
3.2.1.6.

Normal engine idling speed(9) … min-1 U.K.

3.2.1.6.1.High engine idling speed(9) … min-1 U.K.
3.2.1.7.Carbon monoxide content by volume in the exhaust gas with the engine idling(9) … as stated by the manufacturer (positive ignition engines only)U.K.
[F23.2.1.8. Rated engine power (n): … kW at … min –1 (manufacturer's declared value)] U.K.
3.2.1.9.Maximum permitted engine speed as prescribed by the manufacturer: … min-1U.K.
3.2.1.10.Maximum net torque(10): Nm at … min-1 (manufacturer’s declared value)U.K.
[F33.2.2.

Fuel] U.K.

[F43.2.2.1. Light-duty vehicles: Diesel/Petrol/LPG/NG or Biomethane/Ethanol (E85) /Biodiesel /Hydrogen/H2NG] (1) (11) U.K.

Textual Amendments

[F23.2.2.1.1. RON, unleaded:] U.K.
3.2.2.3.Fuel tank inlet: restricted orifice/label(1) U.K.
3.2.2.4.Vehicle fuel type: Mono fuel, Bi fuel, Flex fuelU.K.
3.2.2.5.Maximum amount of biofuel acceptable in fuel (manufacturer’s declared value): … % by volumeU.K.

Textual Amendments

3.2.4.

Fuel feedU.K.

3.2.4.2.

By fuel injection (compression ignition only): yes/no(1) U.K.

[F23.2.4.2.1. System description (common rail/unit injectors/distribution pump etc.):] U.K.
3.2.4.2.2.Working principle: direct injection/pre-chamber/swirl chamber(1) U.K.
[F23.2.4.2.3.

Injection/Delivery pump] U.K.

3.2.4.2.3.1.Make(s):U.K.
3.2.4.2.3.2.Type(s):U.K.
3.2.4.2.3.3.Maximum fuel delivery(1) (9) mm3/stroke or cycle at an engine speed of: … min-1 or, alternatively, a characteristic diagram:U.K.
3.2.4.2.3.5.Injection advance curve(9):U.K.
[F23.2.4.2.4.

Engine speed limitation control] U.K.

3.2.4.2.4.2.

Cut-off pointU.K.

3.2.4.2.4.2.1.Cut-off point under load … min-1 U.K.
3.2.4.2.4.2.2.Cut-off point without load … min-1 U.K.
3.2.4.2.6.

Injector(s)U.K.

3.2.4.2.6.1.Make(s):U.K.
3.2.4.2.6.2.Type(s):U.K.
3.2.4.2.7.

Cold start systemU.K.

3.2.4.2.7.1.Make(s):U.K.
3.2.4.2.7.2.Type(s):U.K.
3.2.4.2.7.3.Description:U.K.
3.2.4.2.8.

Auxiliary starting aidU.K.

3.2.4.2.8.1.Make(s):U.K.
3.2.4.2.8.2.Type(s):U.K.
3.2.4.2.8.3.System description:U.K.
3.2.4.2.9.

Electronic controlled injection: yes/no(1) U.K.

3.2.4.2.9.1.Make(s):U.K.
3.2.4.2.9.2.Type(s):U.K.
[F23.2.4.2.9.3.

Description of the system] U.K.

3.2.4.2.9.3.1.Make and type of the control unit:U.K.
3.2.4.2.9.3.2.Make and type of the fuel regulator:U.K.
3.2.4.2.9.3.3.Make and type of air-flow sensor:U.K.
3.2.4.2.9.3.4.Make and type of fuel distributor:U.K.
3.2.4.2.9.3.5.Make and type of throttle housing:U.K.
[F23.2.4.2.9.3.6. Make and type or working principle of water temperature sensor: U.K.
3.2.4.2.9.3.7. Make and type or working principle of air temperature sensor: U.K.
3.2.4.2.9.3.8. Make and type or working principle of air pressure sensor:] U.K.
3.2.4.3.

By fuel injection (positive ignition only): yes/no(1) U.K.

3.2.4.3.1.Working principle: intake manifold (single-/multi-point(1))/direct injection/other (specify)(1) U.K.
3.2.4.3.2.Make(s):U.K.
3.2.4.3.3.Type(s):U.K.
3.2.4.3.4.

System description, in the case of systems other than continuous injection give equivalent details:U.K.

3.2.4.3.4.1.Make and type of the control unit:U.K.
[F23.2.4.3.4.3. Make and type or working principle of air-flow sensor:] U.K.
3.2.4.3.4.6.Make and type of micro switch:U.K.
3.2.4.3.4.8.Make and type of throttle housing:U.K.
[F23.2.4.3.4.9. Make and type or working principle of water temperature sensor: U.K.
3.2.4.3.4.10. Make and type or working principle of air temperature sensor: U.K.
3.2.4.3.4.11. Make and type or working principle of air pressure sensor:] U.K.
[F23.2.4.3.5.

Injectors] U.K.

3.2.4.3.5.1.Make(s):U.K.
3.2.4.3.5.2.Type(s):U.K.
3.2.4.3.6.Injection timing:U.K.
3.2.4.3.7.

Cold start systemU.K.

3.2.4.3.7.1.Operating principle(s):U.K.
3.2.4.3.7.2.Operating limits/settings(1) (9):U.K.
3.2.4.4.

Feed pumpU.K.

3.2.4.4.1.Pressure(9): … kPa or characteristic diagram(9):U.K.
3.2.5.

Electrical systemU.K.

3.2.5.1.Rated voltage: V, positive/negative ground(1) U.K.
3.2.5.2.

GeneratorU.K.

3.2.5.2.1.Type:U.K.
3.2.5.2.2.Nominal output: … VAU.K.
3.2.6.

IgnitionU.K.

3.2.6.1.Make(s):U.K.
3.2.6.2.Type(s):U.K.
3.2.6.3.Working principle:U.K.
3.2.6.4.Ignition advance curve(9):U.K.
3.2.6.5.Static ignition timing(9): … degrees before TDCU.K.
3.2.7.

Cooling system: liquid/air(1) U.K.

3.2.7.1.Nominal setting of the engine temperature control mechanism:U.K.
3.2.7.2.

LiquidU.K.

3.2.7.2.1.Nature of liquid:U.K.
3.2.7.2.2.Circulating pump(s):yes/no(1) U.K.
3.2.7.2.3.

Characteristics, orU.K.

3.2.7.2.3.1.Make(s):U.K.
3.2.7.2.3.2.Type(s):U.K.
3.2.7.2.4.Drive ratio(s):U.K.
3.2.7.2.5.Description of the fan and its drive mechanism:U.K.
3.2.7.3.

AirU.K.

3.2.7.3.1.Blower: yes/no(1) U.K.
3.2.7.3.2.

Characteristics:, orU.K.

3.2.7.3.2.1.Make(s):U.K.
3.2.7.3.2.2.Type(s):U.K.
3.2.7.3.3.Drive ratio(s):U.K.
3.2.8.

Intake systemU.K.

3.2.8.1.

Pressure charger: yes/no(1) U.K.

3.2.8.1.1.Make(s):U.K.
3.2.8.1.2.Type(s):U.K.
3.2.8.1.3.Description of the system (e.g. maximum charge pressure: … kPa, wastegate if applicable):U.K.
3.2.8.2.

Intercooler: yes/no(1) U.K.

3.2.8.2.1.Type: air-air/air-water(1) U.K.
3.2.8.3.Intake depression at rated engine speed and at 100 % load (compression ignition engines only)U.K.

Minimum allowable: kPa

Maximum allowable: kPa

3.2.8.4.

Description and drawings of the inlet pipes and their accessories (plenum chamber, heating device, additional air intakes, etc.):U.K.

3.2.8.4.1.Intake manifold description (include drawings and/or photos):U.K.
3.2.8.4.2.

Air filter, drawings: … orU.K.

3.2.8.4.2.1.Make(s):U.K.
3.2.8.4.2.2.Type(s):U.K.
3.2.8.4.3.

Intake silencer, drawings: … orU.K.

3.2.8.4.3.1.Make(s):U.K.
3.2.8.4.3.2.Type(s):U.K.
3.2.9.

Exhaust systemU.K.

3.2.9.1.Description and/or drawing of the exhaust manifold:U.K.
3.2.9.2.Description and/or drawing of the exhaust system:U.K.
3.2.9.3.Maximum allowable exhaust back pressure at rated engine speed and at 100 % load (compression ignition engines only): kPaU.K.
3.2.10.Minimum cross-sectional areas of inlet and outlet ports:U.K.
3.2.11.

Valve timing or equivalent dataU.K.

3.2.11.1.Maximum lift of valves, angles of opening and closing, or timing details of alternative distribution systems, in relation to dead centres. For variable timing system, minimum and maximum timing:U.K.
3.2.11.2.Reference and/or setting ranges(1):U.K.
3.2.12.

Measures taken against air pollutionU.K.

3.2.12.1.Device for recycling crankcase gases (description and drawings):U.K.
[F23.2.12.2.

Pollution control devices (if not covered by another heading) U.K.

3.2.12.2.1.

Catalytic converter] U.K.

3.2.12.2.1.1.Number of catalytic converters and elements (provide the information below for each separate unit):U.K.
3.2.12.2.1.2.Dimensions, shape and volume of the catalytic converter:U.K.
3.2.12.2.1.3.Type of catalytic action:U.K.
3.2.12.2.1.4.Total charge of precious metals:U.K.
3.2.12.2.1.5.Relative concentration:U.K.
3.2.12.2.1.6.Substrate (structure and material):U.K.
3.2.12.2.1.7.Cell density:U.K.
3.2.12.2.1.8.Type of casing for the catalytic converter(s):U.K.
3.2.12.2.1.9.Location of the catalytic converter(s) (place and reference distance in the exhaust line):U.K.
3.2.12.2.1.10.Heat shield: yes/no(1) U.K.
F53.2.12.2.1.11.

F5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.

F53.2.12.2.1.11.1.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.
F53.2.12.2.1.11.2.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.
F53.2.12.2.1.11.3.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.
F53.2.12.2.1.11.4.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.
F53.2.12.2.1.11.5.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.
F53.2.12.2.1.11.6.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.
F53.2.12.2.1.11.7.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.
F53.2.12.2.1.11.8.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.
F53.2.12.2.1.11.9.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.
F53.2.12.2.1.11.10.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.

Textual Amendments

3.2.12.2.1.12.Make of catalytic converter:U.K.
3.2.12.2.1.13.Identifying part number:U.K.
[F23.2.12.2.2.

Sensors U.K.

3.2.12.2.2.1. Oxygen sensor: yes/no (1) U.K.
3.2.12.2.2.1.1. Make: U.K.
3.2.12.2.2.1.2. Location: U.K.
3.2.12.2.2.1.3. Control range: U.K.
3.2.12.2.2.1.4. Type or working principle: … U.K.
3.2.12.2.2.1.5. Identifying part number: …] U.K.
3.2.12.2.3.

Air injection: yes/no(1) U.K.

3.2.12.2.3.1.Type (pulse air, air pump etc.):U.K.
3.2.12.2.4.

Exhaust gas recirculation: yes/no(1) U.K.

[F23.2.12.2.4.1. Characteristics (make, type, flow, high pressure / low pressure / combined pressure, etc.): U.K.
3.2.12.2.4.2. Water-cooled system (to be specified for each EGR system e.g. low pressure / high pressure / combined pressure: yes/no] (1) U.K.
[F23.2.12.2.5.

Evaporative emissions control system (petrol and ethanol engines only): yes/no (1) U.K.

3.2.12.2.5.1. Detailed description of the devices: U.K.
3.2.12.2.5.2. Drawing of the evaporative emissions control system: U.K.
3.2.12.2.5.3. Drawing of the carbon canister: U.K.
3.2.12.2.5.4. Mass of dry charcoal: … g U.K.
3.2.12.2.5.5. Schematic drawing of the fuel tank with indication of capacity and material (petrol and ethanol engines only): … U.K.
3.2.12.2.5.6. Description and schematic of the heat shield between tank and exhaust system: … U.K.
[F63.2.12.2.5.7. Permeability factor (1) : …] ] U.K.

Textual Amendments

3.2.12.2.6.

Particulate trap: yes/no(1) U.K.

3.2.12.2.6.1.Dimensions, shape and capacity of the particulate trap:U.K.
3.2.12.2.6.2.Type and design of the particulate trap:U.K.
3.2.12.2.6.3.Location (reference distance in the exhaust line):U.K.
F53.2.12.2.6.4.

F5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.

F53.2.12.2.6.4.1.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.
F53.2.12.2.6.4.2.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.
F53.2.12.2.6.4.3.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.
F53.2.12.2.6.4.4.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.
[F23.2.12.2.6.4. Make of particulate trap: … U.K.
3.2.12.2.6.5. Identifying part number: …] U.K.
3.2.12.2.7.

On-board-diagnostic (OBD) system: (yes/no)(1) U.K.

3.2.12.2.7.1.Written description and/or drawing of the MI:U.K.
3.2.12.2.7.2.List and purpose of all components monitored by the OBD system:U.K.
3.2.12.2.7.3.

Written description (general working principles) for:U.K.

3.2.12.2.7.3.1.

Positive-ignition engines(1) U.K.

3.2.12.2.7.3.1.1.Catalyst monitoring(1):U.K.
3.2.12.2.7.3.1.2.Misfire detection(1):U.K.
3.2.12.2.7.3.1.3.Oxygen sensor monitoring(1):U.K.
3.2.12.2.7.3.1.4.Other components monitored by the OBD system(1):U.K.
3.2.12.2.7.3.2.

Compression-ignition engines(1) U.K.

3.2.12.2.7.3.2.1.Catalyst monitoring(1):U.K.
3.2.12.2.7.3.2.2.Particulate trap monitoring(1):U.K.
3.2.12.2.7.3.2.3.Electronic fuelling system monitoring(1):U.K.
3.2.12.2.7.3.2.4.Other components monitored by the OBD system(1):U.K.
3.2.12.2.7.4.Criteria for MI activation (fixed number of driving cycles or statistical method):U.K.
3.2.12.2.7.5.List of all OBD output codes and formats used (with explanation of each):U.K.
3.2.12.2.7.6.

The following additional information shall be provided by the vehicle manufacturer for the purposes of enabling the manufacture of OBD-compatible replacement or service parts and diagnostic tools and test equipment.U.K.

The information given in this section shall be repeated in Appendix 5 to this Annex (vehicle OBD information appendix to the EC type-approval certificate):

3.2.12.2.7.6.1.A description of the type and number of the pre-conditioning cycles used for the original type-approval of the vehicle.U.K.
3.2.12.2.7.6.2.A description of the type of the OBD demonstration cycle used for the original type-approval of the vehicle for the component monitored by the OBD system.U.K.
3.2.12.2.7.6.3.A comprehensive document describing all sensed components with the strategy for fault detection and MI activation (fixed number of driving cycles or statistical method), including a list of relevant secondary sensed parameters for each component monitored by the OBD system. A list of all OBD output codes and format used (with an explanation of each) associated with individual emission related power-train components and individual non-emission related components, where monitoring of the component is used to determine MI activation. In particular, a comprehensive explanation for the data given in service $05 Test ID $21 to FF and the data given in service $06 shall be provided. In the case of vehicle types that use a communication link in accordance with ISO 15765-4 ‘Road vehicles diagnostics on controller area network (CAN) — part 4: requirements for emissions-related systems’, a comprehensive explanation for the data given in service $06 Test ID $00 to FF, for each OBD monitor ID supported, shall be provided.U.K.
3.2.12.2.7.6.4.The information required by this section may, for example, be defined by completing a table as follows, which shall be attached to this Annex.U.K.
ComponentFault codeMonitoring strategyFault detection criteriaMI activation criteriaSecondary parametersPreconditioningDemonstration test
CatalystPO420Oxygen sensor 1 and 2 signalsDifference between sensor 1 and sensor 2 signals3rd cycleEngine speed, engine load, A/F mode, catalyst temperatureTwo Type 1 cyclesType 1
[F23.2.12.2.8. Other system:] U.K.
[F73.2.12.2.10. Periodically regenerating system: (provide the information below for each separate unit) U.K.
3.2.12.2.10.1. Method or system of regeneration, description and/or drawing: … U.K.
3.2.12.2.10.2. The number of Type 1 operating cycles, or equivalent engine test bench cycles, between two cycles where regenerative phases occur under the conditions equivalent to Type 1 test (Distance ‘ D ’ in Figure A6.App1/1 in Appendix 1 to Sub-Annex 6 of Annex XXI to Regulation (EU) 2017/1151 or figure A13/1 in Annex 13 to UN/ECE Regulation 83 (as applicable)): … U.K.
3.2.12.2.10.2.1.

Applicable Type 1 cycle: (indicate the applicable procedure: Annex XXI, Sub-Annex 4 or UN/ECE Regulation 83): …

3.2.12.2.10.3. Description of method employed to determine the number of cycles between two cycles where regenerative phases occur: … U.K.
3.2.12.2.10.4. Parameters to determine the level of loading required before regeneration occurs (i.e. temperature, pressure etc.): … U.K.
3.2.12.2.10.5. Description of method used to load system in the test procedure described in paragraph 3.1., Annex 13 to UN/ECE Regulation 83: … U.K.

Textual Amendments

3.2.12.2.11. Catalytic converter systems using consumable reagents (provide the information below for each separate unit) yes/no (1) U.K.
3.2.12.2.11.1. Type and concentration of reagent needed: … U.K.
3.2.12.2.11.2. Normal operational temperature range of reagent: … U.K.
3.2.12.2.11.3. International standard: … U.K.
3.2.12.2.11.4. Frequency of reagent refill: continuous/maintenance (where appropriate): U.K.
3.2.12.2.11.5. Reagent indicator: (description and location) U.K.
3.2.12.2.11.6. Reagent tank U.K.
3.2.12.2.11.6.1. Capacity: … U.K.
3.2.12.2.11.6.2. Heating system: yes/no (1) U.K.
3.2.12.2.11.6.2.1. Description or drawing U.K.
3.2.12.2.11.7. Reagent control unit: yes/no (1) U.K.
3.2.12.2.11.7.1. Make: … U.K.
3.2.12.2.11.7.2. Type: … U.K.
3.2.12.2.11.8. Reagent injector (make, type and location): …] U.K.
3.2.13.Location of the absorption coefficient symbol (compression ignition engines only):U.K.
3.2.14.Details of any devices designed to influence fuel economy (if not covered by other items):U.K.
3.2.15.

LPG fuelling system: yes/no(1) U.K.

[F23.2.15.1. Type-approval number according to Regulation (EC) No 661/2009 ( OJ L 200, 31.7.2009, p. 1 )] U.K.
3.2.15.2.

Electronic engine management control unit for LPG fuellingU.K.

3.2.15.2.1.Make(s):U.K.
3.2.15.2.2.Type(s):U.K.
3.2.15.2.3.Emission-related adjustment possibilities:U.K.
3.2.15.3.

Further documentationU.K.

3.2.15.3.1.Description of the safeguarding of the catalyst at switch-over from petrol to LPG or back:U.K.
3.2.15.3.2.System lay-out (electrical connections, vacuum connections compensation hoses, etc.):U.K.
3.2.15.3.3.Drawing of the symbol:U.K.
3.2.16.

NG fuelling system: yes/no(1) U.K.

[F23.2.16.1. Type-approval number according to Regulation (EC) No 661/2009 ( OJ L 200, 31.7.2009, p. 1 )] U.K.
3.2.16.2.

Electronic engine management control unit for NG fuellingU.K.

3.2.16.2.1.Make(s):U.K.
3.2.16.2.2.Type(s):U.K.
3.2.16.2.3.Emission-related adjustment possibilities:U.K.
3.2.16.3.

Further documentationsU.K.

3.2.16.3.1.Description of the safeguarding of the catalyst at switch-over from petrol to NG or back:U.K.
3.2.16.3.2.System lay-out (electrical connections, vacuum connections compensation hoses, etc.):U.K.
3.2.16.3.3.Drawing of the symbol:U.K.
[F43.2.18. Hydrogen fuelling system: yes/no (1) U.K.
3.2.18.1. EC type-approval number according to Regulation (EC) No 79/2009: U.K.
3.2.18.2. Electronic engine management control unit for hydrogen fuelling U.K.
3.2.18.2.1. Make(s): U.K.
3.2.18.2.2. Type(s): U.K.
3.2.18.2.3. Emission-related adjustment possibilities: U.K.
3.2.18.3. Further documentation U.K.
3.2.18.3.1. Description of the safeguarding of the catalyst at switch-over from petrol to hydrogen or back: U.K.
3.2.18.3.2. System lay-out (electrical connections, vacuum connections compensation hoses, etc.): U.K.
3.2.18.3.3. Drawing of the symbol: U.K.
3.2.19. H2NG fuelling system: yes/no (1) U.K.
3.2.19.1. Percentage of hydrogen in the fuel (the maximum specified by the manufacturer): U.K.
3.2.19.2. EC type-approval number according to UN/ECE Regulation No 110 (12) U.K.
3.2.19.3. Electronic engine management control unit for H2NG fuelling U.K.
3.2.19.3.1. Make(s): U.K.
3.2.19.3.2. Type(s): U.K.
3.2.19.3.3. Emission-related adjustment possibilities: U.K.
3.2.19.4. Further documentation U.K.
3.2.19.4.1. Description of the safeguarding of the catalyst at switch-over from petrol to H2NG or back: U.K.
3.2.19.4.2. System lay-out (electrical connections, vacuum connections compensation hoses, etc.): U.K.
3.2.19.4.3. Drawing of the symbol:] U.K.
[F4 [F23.3. Electric machine] U.K.
3.3.1. Type (winding, excitation): … U.K.
[F83.3.1.1. Maximum hourly output:kW U.K.

(manufacturer’s declared value)

3.3.1.1.1. Maximum net power ( a )kW U.K.

(manufacturer’s declared value)

3.3.1.1.2. Maximum 30 minutes power (a)kW U.K.

(manufacturer’s declared value)]

Textual Amendments

3.3.1.2. Operating voltage:… V U.K.
[F23.3.2. REESS] U.K.
3.3.2.1. Number of cells: U.K.
3.3.2.2. Mass:kg U.K.
3.3.2.3. Capacity: … Ah (Amp-hours) U.K.
3.3.2.4. Position:] U.K.
[F23.4.

Combinations of propulsion energy converters] U.K.

3.4.1.Hybrid Electric Vehicle: yes/no(1) U.K.
3.4.2.Category of Hybrid Electric vehicleU.K.

Off Vehicle Charging/Not Off Vehicle Charging(1)

3.4.3.

Operating mode switch: with/without(1) U.K.

3.4.3.1.

Selectable modesU.K.

3.4.3.1.1.Pure electric: yes/no(1) U.K.
3.4.3.1.2.Pure fuel consuming: yes/no(1) U.K.
3.4.3.1.3.Hybrid modes: yes/no(1) U.K.

(if yes, short description)

[F23.4.4.

Description of the energy storage device: (REESS, capacitor, flywheel/generator)] U.K.

3.4.4.1.Make(s):U.K.
3.4.4.2.Type(s):U.K.
3.4.4.3.Identification number:U.K.
3.4.4.4.Kind of electrochemical couple: ….U.K.
[F23.4.4.5. Energy: … (for REESS: voltage and capacity Ah in 2 h, for capacitor: J, …)] U.K.
3.4.4.6.Charger: on board/external/without(1) U.K.
[F23.4.5.

Electric machine (describe each type of electric machine separately)] U.K.

3.4.5.1.Make:U.K.
3.4.5.2.Type: ….U.K.
3.4.5.3.

Primary use: traction motor/generatorU.K.

3.4.5.3.1.When used as traction motor: monomotor/multimotors (number):U.K.
3.4.5.4.Maximum power: kWU.K.
3.4.5.5.

Working principle:U.K.

3.4.5.5.1.direct current/alternating current/number of phases:U.K.
3.4.5.5.2.separate excitation/series/compound(1) U.K.
3.4.5.5.3.synchronous/asynchronous(1) U.K.
3.4.6.

Control unitU.K.

3.4.6.1.Make(s):U.K.
3.4.6.2.Type(s):U.K.
3.4.6.3.Identification number:U.K.
3.4.7.

Power controllerU.K.

3.4.7.1.Make:U.K.
3.4.7.2.Type:U.K.
3.4.7.3.Identification number:U.K.
[F33.4.8. Vehicle electric range … … km (in accordance to Annex 9 to UN/ECE Regulation No 101] (13) U.K.
3.4.9.Manufacturer’s recommendation for preconditioning:U.K.
[F23.5.

Manufacturer’s declared values for determination of CO 2 emissions/fuel consumption/electric consumption/electric range and details of eco-innovations (where applicable)] (14) U.K.

3.5.1.

CO2 mass emissions (provide for each reference fuel tested)U.K.

3.5.1.1.CO2 mass emissions (urban conditions): … g/kmU.K.
3.5.1.2.CO2 mass emissions (extra-urban conditions): … g/kmU.K.
3.5.1.3.CO2 mass emissions (combined): … g/kmU.K.
3.5.2.

Fuel consumption (provide for each reference fuel tested)U.K.

[F33.5.2.1. Fuel consumption (urban conditions) … l/100 km or m 3 /100 km or kg/100 km (1) U.K.
3.5.2.2. Fuel consumption (extra-urban conditions) … l/100 km or m 3 /100 km or kg/100 km (1) U.K.
3.5.2.3. Fuel consumption (combined) … l/100 km or m 3 /100 km or kg/100 km] (1) U.K.
[F9 [F83.5.3. Electric energy consumption for electric vehicles] U.K.
3.5.3.1. Type/Variant/Version of the baseline vehicle as defined in Article 5 of Implementing Regulation (EU) No 725/2011 (15) U.K.
[F103.5.3.1. Electric energy consumption for pure electric vehicles … Wh/km] U.K.

Textual Amendments

3.5.3.2. Interactions existing between different eco-innovations: yes/no (16) U.K.
[F103.5.3.2. Electric energy consumption for externally chargeable hybrid electric vehicles U.K.
3.5.3.2.1. Electric energy consumption (Condition A, combined) Wh/km U.K.
3.5.3.2.2. Electric energy consumption (Condition B, combined) Wh/km U.K.
3.5.3.2.3. Electric energy consumption (weighted combined) Wh/km] U.K.
3.5.3.3. Emissions data related to the use of eco-innovations (17) (18) U.K.
a

Number of the Commission Decision approving the eco-innovation.

b

Assigned in the Commission Decision approving the eco-innovation.

c

Under agreement of the type-approval authority, if modelling is applied instead of the type 1 test-cycle, this value shall be the one provided by the modelling methodology.

d

Sum of the emission s saving of each individual eco-innovation.]

Decision approving the eco-innovation a Code of the eco-innovation b 1. CO 2 emissions of the baseline vehicle (g/km) 2. CO 2 emissions of the eco-innovation vehicle (g/km) 3. CO 2 emissions of the baseline vehicle under type 1 test-cycle c 4. CO 2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) 5. Usage factor (UF)i.e. temporal share of technology usage in normal operation conditions CO 2 emissions savings
xxxx/201x a
Total CO 2 emissions saving (g/km) d

Textual Amendments

F113.5.4.Electric energy consumption for externally chargeable hybrid electric vehiclesU.K.
F113.5.4.1.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.
F113.5.4.2.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.
F113.5.4.3.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.

Textual Amendments

[F12 [F133.5.6. Vehicle fitted with an eco-innovation within the meaning of Article 12 of Regulation (EC) No 443/2009 for M 1 vehicles or Article 12 of Regulation (EU) No 510/2011 for N 1 vehicles: yes/no (19) . U.K.
3.5.6.1. Type/Variant/Version of the baseline vehicle as referred to in Article 5 of Regulation (EU) No 725/2011 for M 1 vehicles or Article 5 of Regulation (EU) No 427/2014 for N 1 vehicles (20) .] U.K.
3.5.6.2. Interactions existing between different eco-innovations: yes/no (19) U.K.
3.5.6.3. Emissions data related to the use of eco-innovations (21) (22) U.K.
a

Number of the Commission Decision approving the eco-innovation.

b

Assigned in the Commission Decision approving the eco-innovation.

c

Under agreement of the type-approval authority, if modelling is applied instead of the type 1 test-cycle, this value shall be the one provided by the modelling methodology.

d

Sum of the emissions saving of each individual eco-innovation.]

Decision approving the eco-innovation a Code of the eco-innovation b 1. CO 2 emissions of the baseline vehicle (g/km) 2. CO 2 emissions of the eco-innovation vehicle (g/km) 3. CO 2 emissions of the baseline vehicle under type 1 test-cycle c 4. CO 2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) 5. Usage factor (UF)i.e. temporal share of technology usage in normal operation conditions CO 2 emissions savings
xxxx/201x a
Total CO 2 emissions saving (g/km) d

Textual Amendments

3.6.

Temperatures permitted by the manufacturerU.K.

3.6.1.

Cooling systemU.K.

3.6.1.1.Liquid coolingU.K.

Maximum temperature at outlet: K

3.6.1.2.

Air coolingU.K.

3.6.1.2.1.Reference point: …U.K.
3.6.1.2.2.Maximum temperature at reference point: KU.K.
3.6.2.Maximum outlet temperature of the inlet intercooler: KU.K.
3.6.3.Maximum exhaust temperature at the point in the exhaust pipe(s) adjacent to the outer flange(s) of the exhaust manifold: KU.K.
3.6.4.Fuel temperatureU.K.

Minimum: K

Maximum: K

3.6.5.Lubricant temperatureU.K.

Minimum: K

Maximum: K

3.8.

Lubrication systemU.K.

3.8.1.

Description of the systemU.K.

3.8.1.1.Position of the lubricant reservoir:U.K.
3.8.1.2.Feed system (by pump/injection into intake/mixing with fuel, etc.)(1) U.K.
3.8.2.

Lubricating pumpU.K.

3.8.2.1.Make(s):U.K.
3.8.2.2.Type(s):U.K.
3.8.3.

Mixture with fuelU.K.

3.8.3.1.Percentage:U.K.
3.8.4.

Oil cooler: yes/no(1) U.K.

3.8.4.1.

Drawing(s): …, orU.K.

3.8.4.1.1.Make(s):U.K.
3.8.4.1.2.Type(s):U.K.

Textual Amendments

4.TRANSMISSION(23) U.K.

4.3.

Moment of inertia of engine flywheel:U.K.

4.3.1.Additional moment of inertia with no gear engaged:U.K.
[F24.4.

Clutch(es)] U.K.

4.4.1.Maximum torque conversion:U.K.
4.5.

GearboxU.K.

4.5.1.Type (manual/automatic/CVT (continuously variable transmission))(1) U.K.
[F24.6. Gear ratios U.K.
Gear Internal gearbox ratios (ratios of engine to gearbox output shaft revolutions) Final drive ratio(s) (ratio of gearbox output shaft to driven wheel revolutions) Total gear ratios
Maximum for CVT
1
2
3
…
Minimum for CVT ]

6.SUSPENSIONU.K.

[F26.6.

Tyres and wheels U.K.

6.6.1.

Tyre/wheel combination(s) U.K.

6.6.1.1.

Axles U.K.

6.6.1.1.1. Axle 1: U.K.
6.6.1.1.1.1. Tyre size designation U.K.
6.6.1.1.2. Axle 2: U.K.
6.6.1.1.2.1. Tyre size designation U.K.

etc.

6.6.2.

Upper and lower limits of rolling radii U.K.

6.6.2.1. Axle 1: U.K.
6.6.2.2. Axle 2: U.K.

etc.

6.6.3. Tyre pressure(s) as recommended by the vehicle manufacturer: kPa] U.K.

9.BODYWORKU.K.

[F29.1. Type of bodywork using the codes defined in Part C of Annex II of Directive 2007/46/EC:] U.K.
9.10.3.

SeatsU.K.

9.10.3.1.Number:U.K.

16.ACCESS TO VEHICLE REPAIR AND MAINTENANCE INFORMATIONU.K.

16.1.

Address of principal website for access to vehicle repair and maintenance information:U.K.

16.1.1.Date from which it is available (no later than 6 months from the date of type approval):U.K.
16.2.Terms and conditions of access to website referred to in Section 16.1:U.K.
16.3.Format of vehicle repair and maintenance information accessible through website referred to in Section 16.1:U.K.

Appendix to information documentINFORMATION ON TEST CONDITIONS

1.Spark plugsU.K.
1.1.Make:U.K.
1.2.Type:U.K.
1.3.Spark-gap setting:U.K.
2.Ignition coilU.K.
2.1.Make: ….U.K.
2.2.Type:U.K.
3.Lubricant usedU.K.
3.1.Make:U.K.
3.2.Type:U.K.

(state percentage of oil in mixture if lubricant and fuel mixed)

4Dynamometer load setting information (repeat information for each dynamometer test)U.K.
4.1.Vehicle bodywork type (variant/version)U.K.
4.2.Gearbox type (manual/automatic/CVT)U.K.
4.3.

Fixed load curve dynamometer setting information (if used)U.K.

4.3.1.Alternative dynamometer load setting method used (yes/no)U.K.
4.3.2.Inertia mass (kg):U.K.
4.3.3.Effective power absorbed at 80km/h including running losses of the vehicle on the dynamometer (kW)U.K.
4.3.4.Effective power absorbed at 50km/h h including running losses of the vehicle on the dynamometer (kW)U.K.
4.4.

Adjustable load curve dynamometer setting information (if used)U.K.

4.4.1.Coast down information from the test track.U.K.
4.4.2.Tyres make and type:U.K.
4.4.3.Tyre dimensions (front/rear):U.K.
4.4.4.Tyre pressure (front/rear) (kPa):U.K.
4.4.5.Vehicle test mass including driver (kg):U.K.
4.4.6.Road coast down data (if used)U.K.
V (km/h)V2 (km/h)V1 (km/h)Mean corrected coast down time (s)
120
100
80
60
40
20
4.4.7.Average corrected road power (if used)U.K.
V (km/h)CPcorrected (kW)
120
100
80
60
40
20
(1)

Delete where not applicable (there are cases where nothing needs to be deleted when more than one entry is applicable).

(2)

If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol.?. (e.g. ABC??123??).

(3)

Classified according to the definitions listed in Annex II, Section A.

(4)

(e) Where there is one version with a normal cab and another with a sleeper cab, both sets of masses and dimensions are to be stated.

(5)

The mass of the driver and, if applicable, of the crew member is assessed at 75 kg (subdivided into 68 kg occupant mass and 7 kg luggage mass according to ISO Standard 2416-1992), the fuel tank is filled to 90 % ant the other liquid containing systems (except those for used water) to 100 % of the capacity specified by the manufacturer.

(6)

For trailers or semi-trailers, and for vehicles coupled with a trailer or a semi-trailer, which exert a significant vertical load on the coupling device or the fifth wheel, this load, divided by standard acceleration of gravity, is included in the maximum technical permissible mass.

(7)

Please fill in here the upper and lower values for each variant.

(8)

This figure must be rounded off to the nearest tenth of a millimetre.

(9)

Specify the tolerance.

(10)

[F8Determined in accordance with the requirements of Annex XX to this Regulation.]

(11)

[F4Vehicles can be fuelled with both petrol and a gaseous fuel but, where the petrol system is fitted for emergency purposes or starting only and of which the petrol tank cannot contain more than 15 litres of petrol, will be regarded for the test as vehicles which can only run on a gaseous fuel.]

(14)

[F2Determined in accordance with the requirements of Directive 80/1268/EEC.]

(15)

[F9If applicable.]

(16)

[F9Delete where not applicable.]

(17)

[F9Repeat the table for each reference fuel tested.]

(18)

[F9Expand the table if necessary, using one extra row per eco-innovation.]

(19)

[F12 [F13Delete where not applicable.] ]

(20)

[F12 [F13If applicable.] ]

(21)

[F12Repeat the table for each reference fuel tested.]

(22)

[F12Expand the table if necessary, using one extra row per eco-innovation.]

(23)

(v) The specified particulars are to be given for any proposed variants.

Textual Amendments

Back to top

Options/Help

Print Options

You have chosen to open the Whole Regulation

The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources

The data on this page is available in the alternative data formats listed: