- Latest available (Revised)
- Original (As adopted by EU)
Directive 2014/31/EU of the European Parliament and of the CouncilShow full title
Directive 2014/31/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of non-automatic weighing instruments (recast) (Text with EEA relevance)
You are here:
What Version
Opening Options
More Resources
Legislation originating from the EU
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
This item of legislation originated from the EU
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Status:
This is the original version (as it was originally adopted).
1. Instruments intended to be used for the applications listed in points (a) to (f) of Article 1(2)
1.1.Those instruments shall bear visibly, legibly and indelibly the following inscriptions:
(i)
the number of the EU-type examination certificate, where appropriate;
(ii)
the manufacturer’s name, registered trade name or registered trade mark;
(iii)
the accuracy class, enclosed in an oval or in two horizontal lines joined by two half circles;
(iv)
maximum capacity, in the form Max …;
(v)
minimum capacity, in the form Min …;
(vi)
verification scale interval, in the form e = …;
(vii)
type, batch or serial number;
and when applicable:
(viii)
for instruments consisting of separate but associated units: identification mark on each unit;
(ix)
scale interval if it is different from e, in the form d = …;
(x)
maximum additive tare effect, in the form T = + …;
(xi)
maximum subtractive tare effect if it is different from Max, in the form T = – …;
(xii)
tare interval if it is different from d, in the form dT = …;
(xiii)
maximum safe load if it is different from Max, in the form Lim …;
(xiv)
the special temperature limits, in the form … oC/… oC;
(xv)
ratio between load receptor and load.
1.2.Those instruments shall have adequate facilities for the affixing of the conformity marking and inscriptions. These shall be such that it shall be impossible to remove the conformity marking and inscriptions without damaging them, and that the conformity marking and inscriptions shall be visible when the instrument is in its regular operating position.
1.3.Where a data plate is used it shall be possible to seal the plate unless it cannot be removed without being destroyed. If the data plate is sealable it shall be possible to apply a control mark to it.
1.4.The inscriptions Max, Min, e, and d, shall also be shown near the display of the result if they are not already located there.
1.5.Each load measuring device which is connected or can be connected to one or more load receptors shall bear the relevant inscriptions relating to the said load receptors.
Options/Help
Print Options
PrintThe Whole Directive
PrintThe Whole Annex
PrintThis Division only
You have chosen to open the Whole Directive
The Whole Directive you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the EU Official Journal
- lists of changes made by and/or affecting this legislation item
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.