Search Legislation

Commission Directive 2012/49/EUShow full title

Commission Directive 2012/49/EU of 10 December 2012 amending Annex II to Directive 2006/87/EC of the European Parliament and of the Council laying down technical requirements for inland waterway vessels (Text with EEA relevance)

 Help about what version

What Version

 Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

This item of legislation originated from the EU

Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).

Status:

This is the original version (as it was originally adopted).

PART III Type approval certificate (MODEL)

Seal of the competent authority

Type approval No: … Extension No: …

Notification of issuance/extension/refusal/withdrawal(1) of type approval for an on-board sewage treatment plant type in accordance with Directive 2006/87/EC

Reason for extension, if applicable: …

Section I

0.General
0.1Make (manufacturer’s company name): …
0.2Manufacturer’s designation for the on-board sewage treatment plant type: …

0.3Manufacturer’s type code corresponding to the information affixed to the on-board treatment plant: …

Position: …

Method of attachment: …

0.4Manufacturer’s name and address: …

Name and address of manufacturer’s authorised representative, if any:

0.5Position, coding and method of attachment of the serial number of the on-board sewage treatment plant: …

0.6Position and method of attachment of the type approval number: …

0.7Address(es) of production works: …

Section II

1.Any restrictions on use: …
1.1Particularities to be observed when installing the on-board sewage treatment plant in a craft:

1.1.1
1.1.2
2.Technical service responsible for carrying out the tests(2) …

3.Date of test report: …
4.Number of test report: …
5.The undersigned hereby certifies the accuracy of the manufacturer information in the annexed information document for the above mentioned on-board sewage treatment plant in accordance with Annex VII of Directive 2006/87/EC and the validity of the annexed test results in relation to the on-board sewage treatment plant type. The sample(s) has (have) been selected by the manufacturer with the agreement of the competent authority and submitted by the manufacturer as the design type of the on-board sewage treatment plant:

The type approval is issued/extended/refused/withdrawn(3):

Place: …

Date: …

Signature: …

Appendices:

Information folder

Test results (see Annex 1)

Addendum

Test results for type approval (MODEL)
0.General
0.1Make (manufacturer’s company name): …
0.2Manufacturer’s designation for the on-board sewage treatment plant type: …
1.Information on the implementation of the test(s)(4).
1.1Inflow values
1.1.1Daily volumetric flow rate of sewage Qd (m3/d): …
1.1.2Daily BOD5 pollution load (kg/d): …
1.2Purification efficiency
1.2.1Evaluation of outflow values
Evaluation of outflow values BOD5 (mg/l)
a

No limit values exist for the inflow.

Location:Sample typeNumber of tests that meet the limit-valuesMinMaxMean
ValuePhase
Inflow24h composite samplesa
Outflow24h composite samples
InflowRandom samples
OutflowRandom samples
Evaluation of outflow values COD (mg/l)
Location:Sample typeNumber of tests that meet the limit-valuesMinMaxMean
ValuePhase
Inflow24h composite samples
Outflow24h composite samples
InflowRandom samples
OutflowRandom samples
Evaluation of outflow values TOC (mg/l)
Location:Sample typeNumber of tests that meet the limit-valuesMinMaxMean
ValuePhase
Inflow24h composite samples
Outflow24h composite samples
InflowRandom samples
OutflowRandom samples
Evaluation of outflow values SRF (mg/l)
Location:Sample typeNumber of tests that meet the limit-valuesMinMaxMean
ValuePhase
Inflow24h composite samples
Outflow24h composite samples
InflowRandom samples
OutflowRandom samples
1.2.2Purification efficiency (elimination efficiency) (%)
ParameterSample typeMinMaxMean
BOD524h composite samples
BOD5Random samples
COD24h composite samples
CODRandom samples
TOC24h composite samples
TOCRandom samples
SRF24h composite samples
SRFRandom samples
1.3Further parameters measured
1.3.1Additional inflow and outflow parameters:
ParameterInflowOutflow
pH
Conductivity
Temperature of liquid phases
1.3.2The following operating parameters are — when available — to be recorded during sampling:
  • Concentration of dissolved oxygen in the bioreactor

  • Dry matter content in the bioreactor

  • Temperature in the bioreactor

  • Ambient temperature

1.3.3Further operating parameters according to the manufacturer’s operating instructions

1.4Competent authority or technical service:

Place, date: … Signature: …

(1)

Specify as appropriate.

(2)

In case tests are made by the competent authority mark “not relevant”.

(3)

Specify as appropriate.

(4)

In case of more test cycles indicate for each cycle.

Back to top

Options/Help

Print Options

You have chosen to open the Whole Directive

The Whole Directive you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources