- Latest available (Revised)
- Original (As adopted by EU)
Commission Decision of 18 December 2013 amending Decisions 2010/2/EU and 2011/278/EU as regards the sectors and subsectors which are deemed to be exposed to a significant risk of carbon leakage (notified under document C(2013) 9186) (Text with EEA relevance) (2014/9/EU)
You are here:
- Decisions originating from the EU
- 2014 No. 9
- Annexes only
What Version
More Resources
This is a Decision originating from the EU
This is a legislation item that originated from the EU
After exit day there will be three versions of this legislation to consult for different purposes. The legislation.gov.uk version is the version that applies in the UK. The EU Version currently on EUR-lex is the version that currently applies in the EU i.e you may need this if you operate a business in the EU.
The web archive version is the official version of this legislation item as it stood on exit day before being published to legislation.gov.uk and any subsequent UK changes and effects applied. The web archive also captured associated case law and other language formats from EUR-Lex.
Status:
This is the original version (as it was originally adopted).
ANNEX I
The Annex to Decision 2010/2/EU is amended as follows:
(1)
Section 2 is amended as follows:
(a)
the following entries are inserted before entry 15331427:
| Prodcom Code | Description |
|---|---|
| ‘15311230 | Dried potatoes in the form of flour, meal, flakes, granules and pellets |
| 15311250 | Frozen potatoes, prepared or preserved (including potatoes cooked or partly cooked in oil and then frozen; excluding by vinegar or acetic acid)’ |
(b)
the following entry is inserted after entry 155154:
| Prodcom Code | Description |
|---|---|
| ‘15515533 | Whey and modified whey in powder, granules or other solid forms, whether or not concentrated or containing added sweetening matter’ |
(c)
the following entry is added after entry 26821620:
| Prodcom Code | Description |
|---|---|
| ‘28401133 | Open die forged ferrous parts for transmission shafts, camshafts, crankshafts and cranks’ |
(2)
in Section 3, the following entries are inserted after entry 2640:
| Prodcom Code | Description |
|---|---|
| ‘2653 | Manufacture of plaster |
| 2662 | Manufacture of plaster products for construction purposes’ |
ANNEX II
In Annex I to Decision 2011/278/EU, the entries corresponding to product benchmarks ‘Plaster’, ‘Dried secondary gypsum’ and ‘Plasterboard’ are replaced by the following:
| Product benchmark | Definition of products covered | Definition of processes and emissions covered (system boundaries) | Carbon leakage exposure as determined by Decision 2010/2/EU for the years 2013 and 2014 | Benchmark value(allowances/t) |
|---|---|---|---|---|
| ‘Plaster | Plasters consisting of calcined gypsum or calcium sulphate (including for use in building, for use in dressing woven fabrics or surfacing paper, for use in dentistry, for use in land remediation), in tonnes of stucco. Alpha plaster is not covered by this product benchmark | All processes directly or indirectly linked to the production steps milling, drying and calcining are included | yes | 0,048’, |
| ‘Dried secondary gypsum | Dried secondary gypsum (synthetic gypsum produced as a recycled by-product of the power industry or recycled material from construction waste and demolition) expressed as tons of product | All processes directly or indirectly linked to the drying of secondary gypsum are included | yes | 0,017’, |
| ‘Plasterboard | The benchmark covers boards, sheets, panels, tiles, similar articles of plaster/compositions based on plaster, (not) faced/reinforced with paper/paperboard only, excluding articles agglomerated with plaster, ornamented (in tonnes of stucco). High-density gypsum fibreboards not covered by this product benchmark | All processes directly or indirectly linked to the production steps milling, drying, calcining and board drying are included. For the determination of indirect emissions, only the electricity consumption of heat pumps applied in the drying stage shall be considered | yes | 0,131’ |
Options/Help
Print Options
PrintThe Whole Decision
PrintThe Annexes only
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the EU Official Journal
- lists of changes made by and/or affecting this legislation item
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.