- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
1. The product information sheet must contain the information set out in Table 6.
Supplier’s name or trade mark: | ||||
Supplier’s address: | ||||
Model identifier: | ||||
Type of light source: | ||||
Lighting technology used: | [HL/LFL T5 HE/LFL T5 HO/CFLni/other FL/HPS/MH/other HID/LED/OLED/mixed/other] | Non-directional or directional: | [NDLS/DLS] | |
Light source cap-type (or other electric interface) | [Free text] | |||
Mains or non-mains: | [MLS/NMLS] | Connected light source (CLS): | [yes/no] | |
Colour-tuneable light source: | [yes/no] | Envelope: | [no/second/non-clear] | |
High luminance light source: | [yes/no] | |||
Anti-glare shield: | [yes/no] | Dimmable: | [yes/only with specific dimmers/no] | |
Product parameters | ||||
Parameter | Value | Parameter | Value | |
General product parameters | ||||
Energy consumption in on-mode (kWh/1,000 h) rounded up to the nearest integer | x | Energy efficiency class | [A/B/C/D/E/F/G] | |
Useful luminous flux (Φuse), indicating if it refers to the flux in a sphere (360°), in a wide cone (120°) or in a narrow cone (90°) | x in [sphere/wide cone/narrow cone] | Correlated colour temperature, rounded to the nearest 100K, or the range of correlated colour temperatures, rounded to the nearest 100K, that can be set | [x/x…x/x or x (or x…)] | |
On-mode power (Pon), expressed in W | x.x | Standby power (Psb), expressed in W and rounded to the second decimal point | x.xx | |
Networked standby power (Pnet) for CLS, expressed in W and rounded to the second decimal point | x.xx | Colour rendering index, rounded to the nearest integer, or the range of CRI-values that can be set | [x/x…x] | |
Outer dimensions without separate control gear, lighting control parts and non-lighting control parts, if any (millimetre) | Height | x | Spectral power distribution in the range 250 nm to 800 nm, at full-load | [graphic] |
Width | x | |||
Depth | x | |||
Claim of equivalent power (see paragraph [2(1) and (2)]) | [yes/-] | If yes, equivalent power (W) | x | |
Chromaticity coordinates (x and y) | 0.xxx 0.xxx | |||
Parameters for directional light sources: | ||||
Peak luminous intensity (cd) | x | Beam angle in degrees, or the range of beam angles that can be set | [x/x…x] | |
Parameters for LED and OLED light sources: | ||||
R9 colour rendering index value | x | Survival factor | x.xx | |
The lumen maintenance factor | x.xx | |||
Parameters for LED and OLED mains light sources: | ||||
Displacement factor (cos φ1) | x.xx | Colour consistency in McAdam ellipses | x | |
Claims that an LED light source replaces a fluorescent light source without integrated ballast of a particular wattage (see paragraph [2(3)]. | [yes/-] | If yes then replacement claim (W) | x | |
Flicker metric (Pst LM) | x.x | Stroboscopic effect metric (SVM) | x.x |
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: