Search Legislation

The Representation of the People (Ballot Paper) Regulations 2015

Draft Legislation:

This is a draft item of legislation. This draft has since been made as a UK Statutory Instrument: The Representation of the People (Ballot Paper) Regulations 2015 No. 656

Regulations 2 and 3

SCHEDULE 1FORMS

Form of Ballot Paper

Form of front of ballot paper

Image 2

Form of back of ballot paper

Back of form

Regulation 4

SCHEDULE 2DIRECTIONS AS TO PRINTING

Directions as to printing the ballot paper

1.  Nothing is to be printed on the ballot paper except in accordance with these directions.

2.  So far as is practicable, the arrangements set out in paragraphs 3 to 13 must be observed in the printing of the ballot paper.

3.  No word may be printed on the face except:

(a)the heading “Election of the Member of Parliament for the …………... constituency”;

(b)within that heading, the name of the constituency;

(c)the direction “Vote for only one candidate by putting a cross [X] in the box next to your choice”;

(d)the particulars of the candidates; and

(e)words forming part of the emblems mentioned at paragraph 10 below.

4.  A box must be printed around:

(a)the heading and name referred to in paragraph 3(a) and (b); and

(b)the direction referred to in paragraph 3(c);

and the direction referred to in paragraph 3(c) must be separated from the heading and name referred to in paragraph 3(a) and (b) by a horizontal rule extending across the box.

5.  No rule may be printed on the face except:

(a)as part of the box referred to in paragraph 4;

(b)the horizontal rule referred to in that paragraph;

(c)a horizontal rule above the particulars of the first candidate;

(d)horizontal rules separating the particulars of the candidates from one another;

(e)a horizontal rule below the particulars of the last candidate;

(f)as part of the boxes on the right-hand side of the ballot paper where the vote is to be marked.

6.  The horizontal rules referred to in paragraph 5(c), (d) and (e) must be equally spaced and the space between each of them must be a minimum of 2.5 centimetres.

7.  The boxes referred to in paragraph 5(f) must not touch any horizontal rule and each one must be equidistant between the horizontal rule above it and the horizontal rule below it.

8.  Each of the horizontal rules referred to in paragraph 5(c) and (d) must extend from a point level with the text on the left-hand side of the page to a point directly above the centre of the box below that rule.

9.  The horizontal rule referred to in paragraph 5(e) must:

(a)extend from a point level with the text on the left-hand side of the page to a point directly below the right-hand edge of the box above that rule; and

(b)be thicker than the other horizontal rules.

10.  Where a registered emblem is to be printed against a candidate’s particulars:

(a)it must be printed adjacent to and to the right of the candidate’s particulars; and

(b)its size as printed must not exceed 2 centimetres square.

11.  All the words on the front of the ballot paper must appear in the same large type except that:

(a)the heading and name referred to in paragraph 3(a) and (b) must appear in very large and bold type;

(b)in the direction referred to in paragraph 3(c), the words “only one candidate” must appear in very large and bold type;

(c)the remainder of that direction must appear in very large type;

(d)the names of the candidates and the descriptions, if any, must appear in bold type.

12.  The surname of each candidate must appear in capitals and the candidates’ other names must be in lower case with initial capitals.

13.  The number and other unique identifying mark must be printed close to each other on the back of the ballot paper.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Draft Explanatory Memorandum

Draft Explanatory Memorandum sets out a brief statement of the purpose of a Draft Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Draft Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources