Commission Regulation (EC) No 692/2008Show full title

Addendum to EC type-approval certificate No … concerning the type-approval of a vehicle with regard to emissions and access to vehicle repair and maintenance information according to Regulation (EC) No 715/2007

1. Additional information U.K.

1.1. Mass of the vehicle in running order: … U.K.

1.2. Maximum mass: … U.K.

1.3. Reference mass: … U.K.

1.4. Number of seats: … U.K.

1.6.

Type of bodywork: U.K.

1.6.1. for M₁, M₂: saloon, hatchback, station wagon, coupé, convertible, multipurpose vehicle^a U.K.

1.6.2. for N₁, N₂: lorry, van^a U.K.

1.7. Drive wheels: front, rear, 4 x 4^a U.K.

1.8. Pure electric vehicle: yes/no^a U.K.

1.9.

Hybrid electric vehicle: yes/no^a U.K.

1.9.1. Category of Hybrid Electric vehicle: Off Vehicle Charging/Not Off Vehicle charging^a U.K.

1.9.2. Operating mode switch: with/without^a U.K.

1.10.

Engine identification: U.K.

1.10.1. Engine displacement: U.K.

1.10.2. Fuel supply system: direct injection/indirect injection^a U.K.

1.10.3. Fuel recommended by the manufacturer: U.K.

1.10.4. Maximum power: kW at min' U.K.

1.10.5. Pressure charging device: yes/no^a U.K.

1.10.6. Ignition system: compression ignition/positive ignition^a U.K.

1.11.

Power train (for pure electric vehicle or hybrid electric vehicle)^a U.K.

1.11.1. Maximum net power: … kW, at: … to … min^-1 U.K.

1.11.2. Maximum thirty minutes power: … kW U.K.

1.12.

Traction battery (for pure electric vehicle or hybrid electric vehicle) U.K.

1.12.1. Nominal voltage: V U.K.

1.12.2. Capacity (2 h rate): Ah U.K.

1.13.

Transmission: …, … U.K.

1.13.1. Type of gearbox: manual/automatic/variable transmission^a U.K.

1.13.2. Number of gear ratios: U.K.

1.13.3. Total gear ratios (including the rolling circumferences of the tyres under load): road speeds per 1 000 min^-1 (km/h) U.K.

First gear: …	Sixth gear: …
Second gear: …	Seventh gear: …
Third gear: …	Eighth gear: …
Fourth gear: …	Overdrive: …
Fifth gear: …

1.13.4. Final drive ratio: U.K.

1.14. Tyres: …, …, … U.K.

Type: … Dimensions: …

Rolling circumference under load:

Rolling circumference of tyres used for the Type 1 test

2. Test results U.K.

2.1.

Tailpipe emissions test results U.K.

Emissions classification: Euro 5/Euro 6^a

Type 1 test results, where applicable

Type approval number if not parent vehicle^a: …

a Where applicable.
b Not applicable.
c Mean value calculated by adding mean values (M.Ki) calculated for THC and NOx.
d Round to 2 decimal places.
e Round to 4 decimal places.
f Round to 1 decimal place more than limit value.
Type 1 Result	Test	CO(mg/km)	THC(mg/km)	NMHC(mg/km)	NOx(mg/km)	THC + NOx(mg/km)	Particulates(mg/km)	Particles(#/km)
Measureda d	1
	2
	3
Measured mean value (M)a d
Kia e						b
Mean value calculated with Ki (M.Ki)d						c
DFa e
Final mean value calculated with Ki and DF (M.Ki.DF)f
Limit value

Information about regeneration strategy

D — number of operating cycles between 2 cycles where regenerative phases occur: …

d — number of operating cycles required for regeneration: …

Type 2: … %

Type 3: …

Type 4: … g/test

a Delete where not applicable (there are cases where nothing needs to be deleted when more than one entry is applicable.)
Type 5:	Durability test: whole vehicle test/bench ageing test/nonea Deterioration factor DF: calculated/assigneda Specify the values: …

Type 6	CO (mg/km)	THC (mg/km)
Measured value

2.1.1. Repeat the table for mono fuel gas vehicles for all reference gases of LPG or NG/biomethane, showing if the results are measured or calculated and repeat the table for the (one) final result of the vehicle emissions on LPG or NG/biomethane. In case of a bi fuel gas vehicle, show the result for petrol and repeat the table for all reference gases of LPG or NG/biomethane, showing if the result are measured or calculated and repeat the table for the (one) final result of the vehicle emissions on LPG or NG/biomethane. In the case of other bi fuel and flex fuel vehicles, show the results on the two different reference fuels. U.K.

2.1.2. Written description and/or drawing of the MI: … U.K.

2.1.3. List and function of all components monitored by the OBD system: … U.K.

2.1.4.

Written description (general working principles) for: … U.K.

2.1.4.1. Misfire detection(1): … U.K.

2.1.4.2. Catalyst monitoring(1): … U.K.

2.1.4.3. Oxygen sensor monitoring(1): … U.K.

2.1.4.4. Other components monitored by the OBD system(1): … U.K.

2.1.4.5. Catalyst monitoring(2): … U.K.

2.1.4.6. Particulate trap monitoring(2): … U.K.

2.1.4.7. Electronic fuelling system actuator monitoring(2): … U.K.

2.1.4.8. Other components monitored by the OBD system: … U.K.

2.1.5. Criteria for MI activation (fixed number of driving cycles or statistical method): … U.K.

2.1.6. List of all OBD output codes and formats used (with explanation of each): … U.K.

2.2. Emissions data required for roadworthiness testing U.K.

a Delete where not applicable (there are cases where nothing needs to be deleted when more than one entry is applicable.)
Test	CO value(% vol)	Lambdaa	Engine speed(min-)	Engine oil temperature(°C)
Low idle test		N/A
High idle test

2.3.

Catalytic converters yes/no^a U.K.

2.3.1. Original equipment catalytic converter tested to all relevant requirements of this Regulation yes/no^a U.K.

2.4.

Smoke opacity test results^a U.K.

2.4.1. At steady speeds: See technical service test report number: … U.K.

2.4.2.

Free acceleration tests U.K.

2.4.2.1. Measured value of the absorption coefficient: … m^-1 U.K.

2.4.2.2. Corrected value of the absorption coefficient: … m^-1 U.K.

2.4.2.3. Location of the absorption coefficient symbol on the vehicle: … U.K.

2.5.

CO₂ emissions and fuel consumption test results U.K.

2.5.1.

Internal combustion engine vehicle and Not Externally Chargeable (NOVC) Hybrid Electric Vehicle U.K.

2.5.1.1.

CO₂ mass emissions (provide declared values for each reference fuel tested) U.K.

2.5.1.1.1. CO₂ mass emissions (urban conditions): … g/km U.K.

2.5.1.1.2. CO₂ mass emissions (extra-urban conditions): … g/km U.K.

2.5.1.1.3. CO₂ mass emissions (combined): … g/km U.K.

2.5.1.2.

Fuel consumption (provide declared values for each reference fuel tested) U.K.

2.5.1.2.1. Fuel consumption (urban conditions): … 1/100 km(3) U.K.

2.5.1.2.2. Fuel consumption (extra-urban conditions): … 1/100 km U.K.

2.5.1.2.3. Fuel consumption (combined): … 1/100 km(3) U.K.

2.5.1.3.

For vehicles powered by an internal combustion engine only which are equipped with periodically regenerating systems as defined in paragraph 6 of Article 2 of this Regulation, the test results shall be multiplied by the factor Ki as specified in Annex 10 to UN/ECE Regulation 101. U.K.

2.5.1.3.1. Information about regeneration strategy for CO₂ emissions and fuel consumption U.K.

D — number of operating cycles between 2 cycles where regenerative phases occur: …

d — number of operating cycles required for regeneration: …

a Round to 4 decimal places.
	urban	extra urban	combined
Ki Values for CO2 and fuel consumptiona

2.5.2.

Pure electric vehicles^a U.K.

2.5.2.1.

Electric energy consumption (declared value). U.K.

2.5.2.1.1. Electric energy consumption: … Wh/km U.K.

2.5.2.1.2. Total time out of tolerance for the conduct of the cycle: … sec U.K.

2.5.2.2. Range (declared value): … km U.K.

2.5.3.

Externally chargeable (OVC) Hybrid Electric Vehicle: U.K.

2.5.3.1. CO₂ mass emission (Condition A, combined)(4): … g/km U.K.

2.5.3.2. CO₂ mass emission (Condition B, combined)(4): … g/km U.K.

2.5.3.3. CO₂ mass emission (weighted, combined)(4): … g/km U.K.

2.5.3.4. Fuel consumption (Condition A, combined)(4): … l/100 km U.K.

2.5.3.5. Fuel consumption (Condition B, combined)(4): … l/100 km U.K.

2.5.3.6. Fuel consumption (weighted, combined)(4): … l/100 km U.K.

2.5.3.7. Electric energy consumption (Condition A, combined)(4): … Wh/km U.K.

2.5.3.8. Electric energy consumption (Condition B, combined)(4): … Wh/km U.K.

2.5.3.9. Electric energy consumption (weighted and combined)(4): … Wh/km U.K.

2.5.3.10. Pure electric range: … km U.K.

3.

Vehicle repair information U.K.

3.1.

Address of website for access to vehicle repair and maintenance information: … U.K.

3.1.1. Date from which it is available (up to 6 months from the date of type approval): … U.K.

3.2. Terms and conditions of access (i.e., duration of access, price of access on a hourly, daily, monthly and annual basis) to website referred to in Section 3.1: … U.K.

3.3. Format of vehicle repair and maintenance information accessible through website referred to in Section 3.1: … U.K.

3.4. Manufacturer’s certificate on access to vehicle repair and maintenance information provided: … U.K.

4. Remarks: U.K.

(1)

For vehicles equipped with positive-ignition engines.

(2)

For compression-ignition engine vehicles

(3)

For vehicle fuelled with gas the unit is replaced by m³/km.

(4)

Measured over the combined cycle, i.e. Part One (urban) and Part Two (extra urban) together