- Latest available (Revised)
- Original (As adopted by EU)
COMMISSION DECISION of 29 April 2004 modifying Annex A to Decision 2002/731/EC of 30 May 2002 and establishing the main characteristics of Class A system (ERTMS) of the control-command and signalling subsystem of the trans-European conventional rail system referred to in Directive 2001/16/EC of the European Parliament and of the Council (notified under document number C(2004) 1559) (Text with EEA relevance) (2004/447/EC)
You are here:
- Decisions originating from the EU
- 2004 No. 447
- Whole Decision
- Previous
- Next
What Version
Advanced Features
- Show Geographical Extent(e.g. England, Wales, Scotland and Northern Ireland)
- Show Timeline of Changes
More Resources
Revised version PDFs
- Revised 16/04/20070.07 MB
Legislation originating from the EU
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
This item of legislation originated from the EU
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Changes over time for: COMMISSION DECISION of 29 April 2004 modifying Annex A to Decision 2002/731/EC of 30 May 2002 and establishing the main characteristics of Class A system (ERTMS) of the control-command and signalling subsystem of the trans-European conventional rail system referred to in Directive 2001/16/EC of the European Parliament and of the Council (notified under document number C(2004) 1559) (Text with EEA relevance) (2004/447/EC)
Changes to legislation:
This version of this Decision was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
[X1COMMISSION DECISION
of 29 April 2004
modifying Annex A to Decision 2002/731/EC of 30 May 2002 and establishing the main characteristics of Class A system (ERTMS) of the control-command and signalling subsystem of the trans-European conventional rail system referred to in Directive 2001/16/EC of the European Parliament and of the Council
(notified under document number C(2004) 1559)
(Text with EEA relevance)
(2004/447/EC)]
[X1THE COMMISSION OF THE EUROPEAN COMMUNITIES,
Having regard to the Treaty establishing the European Community,
Having regard to Council Directive 96/48/EC of 23 July 1996 on the interoperability of the trans-European high-speed rail system (1) , and in particular Article 6(2) thereof,
Having regard to Directive 2001/16/EC of 19 March 2001 on the interoperability of the trans-European conventional rail system (2) , and in particular Article 6(1) thereof,
Whereas:
(1) This Decision refers to infrastructure and rolling stock equipment which are subject to Directives 96/48/EC and Directives 2001/16/EC and are to be placed in service after the date on which this Decision takes effect.
(2) The first objective of this Decision is to guide the technical choices made by authorities responsible for planning, constructing, renewing, upgrading and operating the abovementioned infrastructure and rolling stock.
(3) The second objective of this Decision is to update the Annex A of the Commission Decision 2002/731/EC of 30 May 2002 concerning the technical specification for interoperability relating to the control-command and signalling subsystem of the trans-European high-speed rail system referred to in Article 6(1) of Council Directive 96/49/EC (3) .
(4) The third objective of this Decision is to establish a definitive reference of the set of specifications that are to be considered in the context of the control-command and signalling subsystem of the trans-European conventional rail system referred to in Article 6(1) of Directive 2001/16/EC. It does not preclude the need to validate and, if necessary, further amend, update or modify these parameters in the corresponding TSI (TSI CCS-CR), which shall be adopted in accordance with Directive 2001/16/EC. These parameters may also be updated as part of the review of the TSIs provided for in this Directive and considering the opinion expressed in the change control management procedure as provided for in the TSI CCS-HS.
(5) In accordance with Article 2(c) of Directive 96/48/EC, the trans-European high-speed rail system is subdivided into structural or functional subsystems. Each of the subsystems is to be covered by a technical specification for interoperability (TSI).
(6) Decision 2002/731/EC has set up the TSI relating to the control-command and signalling subsystem of the trans-European high speed rail system (TSI CCS-HS).
(7) The Committee set up under Article 21 of Directive 96/48/EC (hereafter the Committee) has appointed the European Association for Railway Interoperability (hereafter the AEIF) as the joint representative body.
(8) The joint representative body shall be responsible for preparing the review and updating of TSIs and making recommendations to the Committee referred to in Article 21 in order to take account of developments in technology or social requirements.
(9) The AEIF has been given a mandate to review the TSI CCS-HS.
(10) As a result of technological evolution as well as of the feedback of the first set of field applications, a major update of the set of specifications included in Annex A of the above mentioned TSI CCS-HS is deemed required. The AEIF has drawn up the draft of the revised Annex A to the TSI CCS-HS.
(11) The draft revised Annex A has been examined by the representatives of the Member States, in the framework of the Committee.
(12) In accordance with Article 2(c) of Directive 2001/16/EC, the trans-European conventional rail system is subdivided into structural or functional subsystems. Each of the subsystems is to be covered by a technical specification for interoperability (TSI).
(13) As a first step, draft TSIs have to be drawn up by the joint representative body under a mandate from the Commission in accordance with the procedure set out in Article 21(2) to the Directive.
(14) The Committee set up under Article 21 of Directive 2001/16/EC (hereafter the Committee) has appointed the European Association for Railway Interoperability (hereafter the AEIF) as the joint representative body.
(15) The AEIF has been given a mandate to draw up a draft TSI for the control-command and signalling subsystem of the trans-European conventional rail system (TSI CCS-CR).
(16) However, in accordance with Article 6(4) of Directive 2001/16/EC, the first stage in developing the abovementioned TSI is to establish the characteristics of its basic parameters.
(17) In accordance with the abovementioned mandate the AEIF has already drafted a complete TSI for the command-control and signalling subsystem of the trans-European conventional rail system (TSI CCS-CR). This TSI will be adopted once the cost-benefit analysis foreseen by Directive 2001/16/EC are developed and after consultation of users organisations and social partners.
(18) The multiplication of ERTMS-related projects for conventional applications both within the European Union and in the accessing countries does press for a reference for conventional rail to emerge. Most of these projects evolve nowadays based on a loose compliance with the current TSI CCS-HS, a situation that could potentially lead to yet another non-interoperable legacy at European level then rooted on different national flavours of ERTMS.
(19) The extension of the high-speed parameters to conventional rail is clearly justified by both market and operational reasons. They range from the scale-effects associated to a uniqueness of solutions between high-speed and conventional rail, to the fulfilment of the operational needs of high-speed trains when they are bound to use the conventional network.
(20) A unique solution for both high-speed and conventional rail is a pivotal concept underpinning ERTMS that has commanded a strong support within the railway sector at large — both by the supply industry and by the railway companies alike.
(21) The revised reference basic parameters for the TSI CCS-HS should therefore be also adopted as the reference basic parameters for the Class A system of the TSI CCS-CR.
(22) The measures provided for in this Decision are in accordance with the opinion of the Committee set up by Directive 96/48/EC,
HAS ADOPTED THIS DECISION:
Editorial Information
X1 Substituted by Corrigendum to Commission Decision 2004/447/EC of 29 April 2004 modifying Annex A to Decision 2002/731/EC of 30 May 2002 and establishing the main characteristics of Class A system (ERTMS) of the control-command and signalling subsystem of the trans-European conventional rail system referred to in Directive 2001/16/EC of the European Parliament and of the Council (Official Journal of the European Union L 155 of 30 April 2004).
Article 1 U.K.
The Annex A to the TSI attached to Decision 2002/731/EC setting up the TSI relating to the control-command and signalling subsystem of the trans-European high-speed rail system is replaced by the table mentioned in the Annex to this Decision.
Editorial Information
X1 Substituted by Corrigendum to Commission Decision 2004/447/EC of 29 April 2004 modifying Annex A to Decision 2002/731/EC of 30 May 2002 and establishing the main characteristics of Class A system (ERTMS) of the control-command and signalling subsystem of the trans-European conventional rail system referred to in Directive 2001/16/EC of the European Parliament and of the Council (Official Journal of the European Union L 155 of 30 April 2004).
F1Article 2U.K.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F1 Deleted by Commission Decision of 28 March 2006 concerning the technical specification for interoperability relating to the control-command and signalling subsystem of the trans-European conventional rail system (notified under document number C(2006) 964) (Text with EEA relevance) (2006/679/EC).
Article 3 U.K.
This Decision is addressed to the Member States.
Editorial Information
X1 Substituted by Corrigendum to Commission Decision 2004/447/EC of 29 April 2004 modifying Annex A to Decision 2002/731/EC of 30 May 2002 and establishing the main characteristics of Class A system (ERTMS) of the control-command and signalling subsystem of the trans-European conventional rail system referred to in Directive 2001/16/EC of the European Parliament and of the Council (Official Journal of the European Union L 155 of 30 April 2004).
ANNEX U.K. ERTMS CHARACTERISTICS
1. DESCRIPTION OF THE PARAMETER U.K.
The unified control/command and signalling subsystem (ERTMS — European rail traffic management system) comprise two elements:
the control/command and signalling element (ERTMS/ETCS — European rail traffic management system/European train control system) covers both the onboard subsystems and track-side subsystems,
the radio and telecommunication element (ERTMS/GSM-R — GSM for railways) is based on the standards applied to the public GSM network and also covers both track-side and onboard equipment. GSM-R is based on ETSI standard GSM phase 2+, including GPRS (global packet radio services), extended to railway-specific applications.
2. CHARACTERISTICS TO BE RESPECTED U.K.
2.1. ERTMS/ETCS: U.K.
The basis for the control-command and signalling subsystem shall be the set of specifications listed in the following table. If deemed necessary, these specifications can be revised and extended in accordance with the TSI revision procedure of Directives 96/48/EC and 2001/16/EC. Such a revision will consider the opinion expressed in the ERTMS Change Control Management procedure, taking into account the fact that a consolidation phase is necessary for the ERTMS specifications, based on the trial sites and the first implementations
ANNEX A U.K. SPECIFICATIONS FOR INTEROPERABILITY
All specifications referred to in this table are mandatory unless they are clearly marked as ‘ informative ’ .
GLOBAL REQUIREMENTS
| a The references of this column are only valid in the case of the TSI CCS-HS. | |||||
| b This is the subject addressed in the paragraph referenced in the TSI. | |||||
| c This is a description of the intent of the standard required to support the TSI. | |||||
| Index No | Control-command TSI paragraph reference a | Subject b | Scope c | European specifications defining basic parameters | Other European specifications |
|---|---|---|---|---|---|
| 0a. | 4.1.1 | ETCS FRS | UIC ETCS FRS Version 4.29 EEIG 99E5362 Version 2.00 | ||
| 0b. | 4.1.1 | GSM-R FRS | EIRENE FRS Version 6.0 | ||
| 1 | 3.2.1 | Safety assurance. | Informative documentation: EN 50128 March 2001 | EN50126 September 1999 EN50129 February 2003 | |
| 2 | RAMS | ||||
| 2a. | 3.2.1 4.1.1 | Safety requirements | Informative documentation UNISIG SUBSET -077-V222 UNISIG SUBSET -078-V222 UNISIG SUBSET -079-V222 (2parts) UNISIG SUBSET -080-V222 (2 parts) UNISIG SUBSET -081-V222 (2 parts) UNISIG SUBSET -088-V222 (6 parts) | UNISIG SUBSET -091-V222 | EN50129 February 2003 |
| 2b. | 3.2.2e | Reliability-availability-requirements. | ERTMS/96s1266- (RAM chapter) to be used as input information. Informative documentation: EEIG 02S1266- Version 6 | Reserved | EN 50126 September 1999 |
| 2c. | 3.2b | Quality of maintenance. | The procedures against which the quality of the maintenance of control-command equipment is to be judged. | Reserved | EN 29000 and EN 29001 |
| 3 | 3.2.5.1.1 4.2.1.2d | Environmental physical conditions. | The minimum requirements upon temperature, humidity, shock, vibration etc. that Control-Command equipment shall respect for use upon the high-speed network. Informative documentation: EEIG 97S0665- Version 5, EN50125-3 October 2003 | Reserved | EN 50125-1 September 1999 and EN 50155 August 2001 |
| 4 | 3.2.5.1.2 | Electromagnetic compatibility: | |||
| 4a. | 3.2.5.1.2 4.2.1.2d | Electromagnetic compatibility | ERTMS/97s0665- to be used as input document. For the purpose of EMC, frequency bands for intentional transmission (Eurobalise, Euroloop, and GSM-R) are excluded from the specifications indicated in this index. Specific requirements for the Eurobalise air-gap are indicated in index 12a. Specific requirements for the Euroloop air-gap are indicated in index 12b. Specific requirements for GSM-R air-gap are indicated in index 12c. | Reserved | For on-board equipment: EN 50121-3-2, September 2000, Tables 4 and 6 in Clause 7. Clauses 4, 5, and 6 are applicable for testing procedures. EN 50121-3-2, September 2000, Tables 7, 8, and 9 in Clause 8. Clauses 4, 5, and 6 are applicable for testing procedures. For track-side equipment: EN 50121-4, September 2000, Clause 5. EN 50121-4, September 2000, Clause 6 |
| 4b | 3.2.5.1.2b 4.2.1.2f | The immunity characteristics of train detection systems. | To ensure that train detection systems are not perturbed by traction current. Input for European specification is contained in the report to TSI CC. | Reserved | (reserved) |
CONTROL COMMAND FUNCTIONS
| a This is the subject addressed in the paragraph referenced in the TSI. | |||||
| b This is a description of the intent of the standard required to support the TSI. | |||||
| Index No | Control-command TSI paragraph reference | Subject a | Scope b | European specifications defining basic parameters | Other European specifications |
|---|---|---|---|---|---|
| 5 | Provision of cab-signalling logic and ATP logic and associated functions. | ||||
| 5a. | 4.1.1 | Normal operation. | Informative documentation: UNISIG SUBSET-050-V200, UNISIG SUBSET-076-0-V222 UNISIG SUBSET -076-2-V221 UNISIG SUBSET -076-3-V221 UNISIG SUBSET -076-4-1-V100 UNISIG SUBSET -076-4-2-V100 UNISIG SUBSET -076-5-3-V220 UNISIG SUBSET -076-5-4-V221 UNISIG SUBSET -076-6-1-V100 UNISIG SUBSET -076-6-4-V100 UNISIG SUBSET -076-6-5-V100 | UNISIG SUBSET-026- V222 UNISIG SUBSET-043-V200 UNISIG SUBSET-046-V200 UNISIG SUBSET-047-V200 UNISIG SUBSET-054-V200 UNISIG SUBSET-055- V222 UNISIG SUBSET -076-5-1-V221 UNISIG SUBSET -076-5-2-V221 UNISIG SUBSET -076-6-3-V100 UNISIG SUBSET -076-7-V100 UNISIG SUBSET -094-0-V100 | |
| 5b. | 4.1.1 | Degraded operation | The system requirements in response to failures. ERTMS/97E832 to be used as input for European specification | UNISIG SUBSET-026- V222 | |
| 6 | 4.1.1 4.1.2.2 | STM management. | The functional and physical requirements on the STM interface to the Class A system. KER compatibility is to be addressed. Informative documentation: UNISIG SUBSET-059-V200 | UNISIG SUBSET-035-V211 UNISIG SUBSET-026- V222 UNISIG SUBSET-056-V220 UNISIG SUBSET-057-V220 UNISIG SUBSET-058-V211 | |
| 7 | 4.1.1 | MMI driver interface functional requirements. | The functional specification for communication between the driver and the onboard assembly. The driver's displays states what is required for driving e.g. cab-signals, warning of intervention. It includes the input functions e.g. train characteristics, override functions, required for interoperable control-command purposes. It also includes the display of text messages. The cab-signals define the minimum range of parameters made available in the cab that together satisfy all the circumstances that could be found upon the railways of the European high-speed network and that therefore make a system common for the whole network feasible. Such parameters would be permitted speed, target speed, target distance, that are the basis of cab-signalling and ATP. Informative documentation: CENELEC WGA9D V21.DOC 12/04/2000 , CENELEC WGA9D V05 DOC 27/03/2000 , CENELEC WGA9D V11.DOC 12/04/2000 , CENELECWGA9D V06.DOC 12/01/2000 , CENELEC WGA9D V08NS.DOC 27/03/2000 and CENELEC WGA9D V04.DOC 27/03/2000 . | UNISIG SUBSET-033-V200 UNISIG SUBSET-026- V222 UNISIG SUBSET-035-V211 | |
| 8 | 4.1.1 | Odometry requirements | The functional requirements of the odometry sub-system required to support the range of performance expected of the equipment providing the Class A interfaces. Location accuracy depends on odometry and the distance between balises. The requirements for speed and distance measurements on an interoperable train. Note relation with index 6, STM | UNISIG SUBSET-041-V200 | |
| 9 | 4.1.1 | Requirements for the onboard recording of operational data | The requirements for the choice of data parameters, regularity, accuracy, validation checks for the purposes of inspecting the proper driving of the train and the behaviour of safety related systems such that the requirements of the legal authorities in all member states can be met. | UNISIG SUBSET-026- V222 UNISIG SUBSET-027-V200 | |
| 10 | r4.1.1 | Vigilance (dead man's) system requirements. | The definition of a vigilance function so that the train can operate acceptably on the European networks. Vigilance ensures that the driver is sufficiently alert (and by implication sufficiently alert to be aware of the signalling). If a timer is used, the timer can be reset by other driver actions on the train controls, traction controller, brakes, cab warning acknowledgement. It can be associated with a need to hold a lever in a given position (dead man function). The functionality required of the vigilance can be modified by the status of ATP and any cab warning system. Vigilance, ATP and cab warning systems are safety related systems in the sense that they support the driver and provide protection to the train in the event of human inadequacy. The level of safety is determined by all these systems, and they are inter-dependent in the sense that the presence or absence of one can affect the functionality of the others. The management of the safety issues is facilitated by considering these systems to be in the scope of control-command. UIC 641 is to be the basis for European Specification. | Reserved | |
| 11 | 4.1.1 4.2.1.2e | Radio. | The definition of the radio system for voice and data communication to and from the trains. | EIRENE SRS Version 14 Test requirements (to be added in the next version of this TSI) | |
INTERFACES BETWEEN ONBOARD AND TRACKSIDE ASSEMBLIES
| a This is the subject addressed in the paragraph referenced in the TSI. | |||||
| b This is a description of the intent of the standard required to support the TSI. | |||||
| c The applicable Up-link and Tele-powering frequency ranges are defined in UNISIG SUBSET-036-V221. | |||||
| Index No | Control-command TSI paragraph reference | Subject a | Scope b | European specifications defining basic parameters | Other European specifications |
|---|---|---|---|---|---|
| 12 | Data transmission interfaces - between the train and the ground. | ||||
| 12a. | 3.2.5.1.2 4.1.2.1 | Balise | Technical compatibility with some Class B systems requires the toggling function as defined in the European specifications. This is to be considered acceptable from the point of view of EMC. | UNISIG SUBSET-036-V221 UNISIG SUBSET-085-V212 | ETSI EN 300330-1, V1.3.1 (June 2001), up to and including Sub-clause 7.2 c . |
| 12b. | 3.2.5.1.2 4.1.2.1 | Loop | Informative documentation: UNISIG SUBSET-050-V200 | UNISIG SUBSET-043-V200 UNISIG SUBSET-044-V200 UNISIG SUBSET-045-V200 Test requirements (to be added in the next version of this TSI) | |
| 12c. | 3.2.5.1.2 4.1.2.1 | Radio | EIRENE SRS Version14 | ||
INTERFACES ONBOARD BETWEEN CONTROL-COMMAND INTEROPERABILITY CONSTITUENTS
| a This is the subject addressed in the paragraph referenced in the TSI. | |||||
| b This is a description of the intent of the standard required to support the TSI. | |||||
| Index No | Control-command TSI paragraph reference | Subject a | Scope b | European specifications defining basic parameters | Other European specifications |
|---|---|---|---|---|---|
| 13 | Onboard data communication interfaces. | The data interfaces between control-command equipment supporting the cab-signalling and automatic train protection functions, and between these functions and the train. | |||
| 13a. | 4.1.2.2 | ERTMS/ETCS Euroradio | UNISIG SUBSET-026- V222 UNISIG SUBSET-034-V200 UNISIG SUBSET-047-V200 UNISIG SUBSET-037-V225 UNISIG SUBSET-093-V226 UNISIG-SUBSET-048-V200 UNISIG SUBSET-092-1-V225 UNISIG SUBSET-092-2-V225 | ||
| 13b | 4.1.2.2 | GSM-R | Informative documentation: O-2475 V1.0 | A11T6001.12 | |
| 13c. | 4.1.2.2 | Train data interface for analysis of operational data recorded onboard | The communications interface, common to the high-speed network, to the data analyser of the data stored in the control-command systems to ensure readability across all parties interested. | UNISIG SUBSET-027-V200 | |
| 13d. | 4.1.2.2 | Odometry interfaces. | ERTMS/97e267 is to be the basis for a European specification A Specification will not be available in the first step. | Reserved | |
INTERFACES AT THE TRACKSIDE BETWEEN CONTROL-COMMAND INTEROPERABILITY CONSTITUENTS
| a This is the subject addressed in the paragraph referenced in the TSI. | |||||
| b This is a description of the intent of the standard required to support the TSI. | |||||
| Index No | Control-command TSI paragraph reference | Subject a | Scope b | European specifications defining basic parameters | Other European specifications |
|---|---|---|---|---|---|
| 14 | Trackside data communication Interfaces between: | ||||
| 14a. | 4.1.2.3 | ERTMS/ETCS Euroradio. | UNISIG SUBSET-049-V200 UNISIG SUBSET-026- V222 UNISIG SUBSET-037-V225 UNISIG SUBSET-092-1-V225 UNISIG SUBSET-092-2-V225 UNISIG SUBSET-093-V226 | ||
| 14b. | 4.1.2.3 | GSM-R | Informative documentation: O-2475 V1.0 | A11T6001.12 | |
| 14c. | 4.1.2.3 | Eurobalise and LEU. | UNISIG SUBSET-036-V221 UNISIG SUBSET-085-V212 | ||
| 14d. | 4.1.2.3 | Euroloop and LEU. | UNISIG SUBSET-045-V200 | ||
| 14e. | 4.1.2.3 | ERTMS/ETCS and ERTMS/ETCS (RBC-RBC-handover). | UNISIG SUBSET-039-V200 | ||
| 15 | 4.2.4 | Key management | UNISIG SUBSET-038-V200 | ||
COMPATIBILITY (NOT EMC) BETWEEN TRAINS AND TRACK-CIRCUITS
| a This is the subject addressed in the paragraph referenced in the TSI. | |||||
| b This is a description of the intent of the standard required to support the TSI. | |||||
| Index No | Control-command TSI paragraph reference | Subject a | Scope b | European specifications defining basic parameters | Other European specifications |
|---|---|---|---|---|---|
| 16 | 4.2.1.2B. | Rolling stock characteristics necessary to be compatible with train-detection systems. | The specification that the rolling stock must respect in order that it will operate the train detection systems correctly. To be completed, e.g., to take into account inductivity in case of axleless wheelsets and minimum axleload. | Reserved | |
DATA INTERFACES BETWEEN CONTROL-COMMAND AND ROLLING-STOCK
| a dsfds | |||||
| b dsfsd | |||||
| Index No | Control-command TSI paragraph reference | Subject a | Scope b | European specifications defining basic parameters | Other European specifications |
|---|---|---|---|---|---|
| 17 | 4.2.1.2E | Train interfaces. | To cover all data concerned by interoperability that may pass between the train and control-command equipment. | UNISIG SUBSET-034-V200 | |
CONTROL-COMMAND PERFORMANCE
| a This is the subject addressed in the paragraph referenced in the TSI. | |||||
| b This is a description of the intent of the standard required to support the TSI. | |||||
| Index No | Control-command TSI paragraph reference | Subject a | Scope b | European specifications defining basic parameters | Other European specifications |
|---|---|---|---|---|---|
| 18 | 4.1.1 4.3 | Performance Required. | Annexes I and IV of Directive 96/48/EC set out performance definitions of the high-speed network. | UNISIG SUBSET-041-V200 | |
VERIFICATION REQUIREMENTS
| a This is the subject addressed in the paragraph referenced in the TSI. | |||||
| b This is a description of the intent of the standard required to support the TSI. | |||||
| c Index number 19 through 31 are intentionally deleted.] | |||||
| Index No | Control-command TSI paragraph reference | Subject a | Scope b | European specifications defining basic parameters | Other European specifications |
|---|---|---|---|---|---|
| 32 c | 6.2 | Onboard assembly integration requirements | This shall be sufficient to ensure that the onboard assembly will operate correctly with the trackside assemblies (subsystem-verification considering the options as indicated in the register of rolling stock). Practical running tests have to be performed after the installation of onboard control-command equipment. Special attention shall be given to electromagnetic compatibility between CC and rolling stock. | UNISIG SUBSET (reserved) | |
| 33 | 6.2 | Trackside assembly integration requirements | This shall be sufficient to ensure that the trackside assembly will operate correctly with the onboard assemblies (subsystem-verification considering the options as indicated in the register of infrastructure). | UNISIG SUBSET (reserved) | |
| 34 | Table 6.1 Table 6.2 | Installation requirements | The engineering rules that apply when installing the control-command assembly onboard and trackside respectively. | UNISIG SUBSET-040-V200 | |
| 35 | Glossary of terms and abbreviations | UNISIG SUBSET-023-V200 | |||
(1)
(2)
(3)
Editorial Information
X1 Substituted by Corrigendum to Commission Decision 2004/447/EC of 29 April 2004 modifying Annex A to Decision 2002/731/EC of 30 May 2002 and establishing the main characteristics of Class A system (ERTMS) of the control-command and signalling subsystem of the trans-European conventional rail system referred to in Directive 2001/16/EC of the European Parliament and of the Council (Official Journal of the European Union L 155 of 30 April 2004).
Options/Help
Print Options
PrintThe Whole Decision
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
See additional information alongside the content
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the EU Official Journal
- lists of changes made by and/or affecting this legislation item
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
Timeline of Changes
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.