Commission Delegated Regulation (EU) No 1062/2010Dangos y teitl llawn

ANNEX IV U.K. Technical documentation

The technical documentation referred to in Article 3(1)(c) shall include:

(a)

the name and address of the supplier;

(b)

a general description of the television model, sufficient for it to be unequivocally and easily identified;

(c)

where appropriate, the references of the harmonised standards applied;

(d)

where appropriate, the other technical standards and specifications used;

(e)

identification and signature of the person empowered to bind the supplier;

(f)

test parameters for measurements:

(i)

ambient temperature;

(ii)

test voltage in V and frequency in Hz;

(iii)

total harmonic distortion of the electricity supply system;

(iv)

the input terminal for the audio and video test signals;

(v)

information and documentation on the instrumentation, set-up and circuits used for electrical testing;

(g)

on-mode parameters:

(i)

the power consumption data in Watts rounded to the first decimal place for power measurements up to 100 Watts, and to the first integer for power measurements above 100 Watts;

(ii)

the characteristics of the dynamic broadcast-content video signal representing typical broadcast TV content;

(iii)

the sequence of steps for achieving a stable condition with respect to power consumption;

(iv)

for televisions with a forced menu, the ratio of the peak luminance of the home-mode and the peak luminance of the brightest on-mode condition provided by the television, expressed as a percentage;

(v)

for television monitors, a description of the relevant characteristics of the tuner used for measurements;

(h)

for each standby or off-mode:

(i)

the power consumption data in Watts rounded to the second decimal place;

(ii)

the measurement method used;

(iii)

description of how the mode was selected or programmed;

(iv)

sequence of events to reach the mode where the television automatically changes modes.