Chwilio Deddfwriaeth

Chwiliad Uwch

Council Regulation (EEC) No 3821/85Dangos y teitl llawn

Council Regulation (EEC) No 3821/85 of 20 December 1985 on recording equipment in road transport

Help about what version

Pa Fersiwn

Help about UK-EU Regulation

Deddfwriaeth yn deillio o’r UE

Pan adawodd y DU yr UE, cyhoeddodd legislation.gov.uk ddeddfwriaeth yr UE a gyhoeddwyd gan yr UE hyd at ddiwrnod cwblhau’r cyfnod gweithredu (31 Rhagfyr 2020 11.00 p.m.). Ar legislation.gov.uk, mae'r eitemau hyn o ddeddfwriaeth yn cael eu diweddaru'n gyson ag unrhyw ddiwygiadau a wnaed gan y DU ers hynny.

Close

Mae'r eitem hon o ddeddfwriaeth yn tarddu o'r UE

Mae legislation.gov.uk yn cyhoeddi fersiwn y DU. Mae EUR-Lex yn cyhoeddi fersiwn yr UE. Mae Archif Gwe Ymadael â’r UE yn rhoi cipolwg ar fersiwn EUR-Lex o ddiwrnod cwblhau’r cyfnod gweithredu (31 Rhagfyr 2020 11.00 p.m.).

Changes to legislation:

There are currently no known outstanding effects by UK legislation for Council Regulation (EEC) No 3821/85. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

  1. Introductory Text

  2. CHAPTER I Principles and scope

    1. Article 1.Recording equipment within the meaning of this Regulation shall, as...

    2. Article 2.For the purpose of this Regulation the definitions set out...

    3. Article 3.(1) Recording equipment shall be installed and used in vehicles...

  3. CHAPTER II Type approval

    1. Article 4.For the purposes of this Chapter, the words ‘ recording...

    2. Article 5.A Member State shall grant EC component type-approval to any...

    3. Article 6.Member States shall issue to the applicant an EEC approval...

    4. Article 7.The competent authorities of the Member State to which the...

    5. Article 8.(1) If a Member State which has granted EEC type...

    6. Article 9.(1) An applicant for EEC type approval of a model...

    7. Article 10.No Member State may refuse to register any vehicle fitted...

    8. Article 11.All decisions pursuant to this Regulation refusing or withdrawing approval...

  4. CHAPTER III Installation and inspection

    1. Article 12.(1) Recording equipment may be installed or repaired only by...

  5. CHAPTER IV Use of equipment

    1. Article 13.The employer and drivers shall ensure the correct functioning and...

    2. Article 14.(1) The employer shall issue a sufficient number of record...

    3. Article 15.(1) Drivers shall not use dirty or damaged record sheets...

    4. Article 16.(1) In the event of breakdown or faulty operation of...

  6. CHAPTER V Final provisions

    1. Article 17.(1) The amendments required to adjust the annexes to technical...

    2. Article 18.(1) The Commission shall be assisted by a Committee.

    3. Article 19.(1) Member States shall, in good time and after consulting...

    4. Article 20.Regulation (EEC) No 1463/70 shall be repealed. However, Article 3...

    5. Article 20a.This Regulation shall not apply until 1 January 1991 to...

    6. Article 21.This Regulation shall enter into force on 29 September 1986....

  7. Signature

    1. ANNEX I

      REQUIREMENTS FOR CONSTRUCTION, TESTING, INSTALLATION AND INSPECTION

      1. I. DEFINITIONS

      2. II. GENERAL CHARACTERISTICS AND FUNCTIONS OF RECORDING EQUIPMENT

      3. III. CONSTRUCTION REQUIREMENTS FOR RECORDING EQUIPMENT

        1. (a) General points

          1. 1. Recording equipment shall include the following:

            1. 1.1. Visual instruments showing:

            2. 1.2. Recording instruments comprising:

            3. 1.3. A means of marking showing on the record sheet individually:...

          2. 2. Any inclusion in the equipment of devices additional to those...

          3. 3. Materials

            1. 3.1. All the constituent parts of the recording equipment must be...

            2. 3.2. Any modification in a constituent part of the equipment or...

          4. 4. Measurement of distance travelled

          5. 5. Measurement of speed

            1. 5.1. The range of speed measurement shall be as stated in...

            2. 5.2. The natural frequency and the damping of the measuring device...

          6. 6. Measurement of time (clock)

            1. 6.1. The control of the mechanism for resetting the clock must...

            2. 6.2. If the forward movement mechanism of the record sheet is...

          7. 7. Lighting and Protection

            1. 7.1 The visual instruments of the equipment must be provided with...

            2. 7.2. For normal conditions of use, all the internal parts of...

        2. (b) Visual instruments

          1. 1. Distance travelled indicator (distance recorder)

            1. 1.1. The value of the smallest grading on the instrument showing...

            2. 1.2. The figures on the distance recorder must be clearly legible...

            3. 1.3. The distance recorder must be capable of reading up to...

          2. 2. Speed indicators (speedometer)

            1. 2.1. Within the range of measurement, the speed scale must be...

            2. 2.2. The range indicated beyond that measured need not be marked...

            3. 2.3. The length of each space on the scale representing a...

            4. 2.4. On an indicator with a needle, the distance between the...

          3. 3. Time indicator (clock)

        3. (c) Recording instruments

          1. 1. General points

            1. 1.1. All equipment, whatever the form of the record sheet (strip...

            2. 1.2. The mechanism moving the record sheet must be such as...

            3. 1.3. For record sheets in disc form, the forward movement device...

            4. 1.4. Recording of the distance travelled, of the speed of the...

          2. 2. Recording distance travelled

            1. 2.1. Every kilometre of distance travelled must be represented on the...

            2. 2.2. Even at speeds reaching the upper limit of the range...

          3. 3. Recording speed

            1. 3.1. Whatever the form of the record sheet, the speed recording...

            2. 3.2. Each variation in speed of 10 kilometres per hour must...

          4. 4. Recording time

            1. 4.1. Recording equipment must be so constructed that the period of...

            2. 4.2. It must be possible, from the characteristics of the traces,...

            3. 4.3. In the case of vehicles with a crew consisting of...

        4. (d) Closing device

          1. 1. The case containing the record sheet or sheets and the...

          2. 2. Each opening of the case containing the record sheet or...

        5. (e) Markings

          1. 1. The following markings must appear on the instrument face of...

          2. 2. The descriptive plaque must be built into the equipment and...

        6. (f) Maximum tolerances (visual and recording instruments)

          1. 1. On the test bench before installation:

          2. 2. On installation:

          3. 3. In use:

          4. 4. The maximum tolerances set out in points 1, 2 and...

          5. 5. Measurement of the maximum tolerances set out in points 2...

      4. IV. RECORD SHEETS

        1. (a) General points

          1. 1. The record sheets must be such that they do not...

          2. 2. The minimum recording capacity of the sheets, whatever their form,...

        2. (b) Recording areas and their graduation

          1. 1. The record sheets shall include the following recording areas:

          2. 2. The area for recording speed must be scaled off in...

          3. 3. The area for recording distance travelled must be set out...

          4. 4. The area or areas reserved for recording the periods referred...

        3. (c) Information to be printed on the record sheets

        4. (d) Free space for hand written insertions

      5. V. INSTALLATION OF RECORDING EQUIPMENT

        1. 1. Recording equipment must be positioned in the vehicle in such...

        2. 2. It must be possible to adapt the constant of the...

        3. 3. After the equipment has been checked on installation, an installation...

        4. 4. Sealing

        5. 5. The cables connecting the recording equipment to the transmitter must...

      6. VI. CHECKS AND INSPECTIONS

        1. 1. Certification of new or repaired instruments

        2. 2. Installation

        3. 3. Periodic inspections

        4. 4. Measurement of errors

    2. ANNEX I B

      REQUIREMENTS FOR CONSTRUCTION, TESTING, INSTALLATION AND INSPECTION

      1. I. DEFINITIONS

      2. II. GENERAL CHARACTERISTICS AND FUNCTIONS OF THE RECORDING EQUIPMENT

        1. 1. General characteristics

        2. 2. Functions

        3. 3. Modes of operation

        4. 4. Security

      3. III. CONSTRUCTION AND FUNCTIONAL REQUIREMENTS FOR RECORDING EQUIPMENT

        1. 1. Monitoring cards insertion and withdrawal

        2. 2. Speed and distance measurement

          1. 2.1. Measurement of distance travelled

          2. 2.2. Measurement of speed

        3. 3. Time measurement

        4. 4. Monitoring driver activities

        5. 5. Monitoring driving status

        6. 6. Drivers manual entries

          1. 6.1. Entry of places where daily work periods begin and/or end...

          2. 6.2. Manual entry of driver activities

          3. 6.3. Entry of specific conditions

        7. 7. Company locks management

        8. 8. Monitoring control activities

        9. 9. Detection of events and/or faults

          1. 9.1. Insertion of a non-valid card ‘’ event

          2. 9.2. ‘ Card conflict ’ event

          3. 9.3. ‘ Time overlap ’ event

          4. 9.4. ‘ Driving without an appropriate card ’ event

          5. 9.5. ‘ Card insertion while driving ’ event

          6. 9.6. ‘ Last card session not correctly closed ’ event

          7. 9.7. ‘ Over speeding ’ event

          8. 9.8. ‘ Power supply interruption ’ event

          9. 9.9. ‘ Motion data error ’ event

          10. 9.9 bis. ‘ Vehicle Motion Conflict ’ event

          11. 9.10. ‘ Security breach attempt ’ event

          12. 9.11. ‘ Card ’ fault

          13. 9.12. ‘ Recording equipment ’ fault

        10. 10. Built-in and self tests

        11. 11. Reading from data memory

        12. 12. Recording and storing in the data memory

          1. 12.1. Equipment identification data

            1. 12.1.1. Vehicle unit identification data

            2. 12.1.2. Motion sensor identification data

          2. 12.2. Security elements

          3. 12.3. Driver card insertion and withdrawal data

          4. 12.4. Driver activity data

          5. 12.5. Places where daily work periods start and/or end

          6. 12.6. Odometer data

          7. 12.7. Detailed speed data

          8. 12.8. Events data

          9. 12.9. Faults data

          10. 12.10. Calibration data

          11. 12.11. Time adjustment data

          12. 12.12. Control activity data

          13. 12.13. Company locks data

          14. 12.14. Download activity data

          15. 12.15. Specific conditions data

        13. 13. Reading from tachograph cards

        14. 14. Recording and storing on tachograph cards

        15. 15. Displaying

          1. 15.1. Default display

          2. 15.2. Warning display

          3. 15.3. Menu access

          4. 15.4. Other displays

        16. 16. Printing

        17. 17. Warnings

        18. 18. Data downloading to external media

        19. 19. Output data to additional external devices

        20. 20. Calibration

        21. 21. Time adjustment

        22. 22. Performance characteristics

        23. 23. Materials

        24. 24. Markings

      4. IV. CONSTRUCTION AND FUNCTIONAL REQUIREMENTS FOR TACHOGRAPH CARDS

        1. 1. Visible data

        2. 2. Security

        3. 3. Standards

        4. 4. Environmental and electrical specifications

        5. 5. Data storage

          1. 5.1. Card identification and security data

            1. 5.1.1. Application identification

            2. 5.1.2. Chip identification

            3. 5.1.3. IC card identification

            4. 5.1.4. Security elements

          2. 5.2. Driver card

            1. 5.2.1. Card identification

            2. 5.2.2. Card holder identification

            3. 5.2.3. Driving licence information

            4. 5.2.4. Vehicles used data

            5. 5.2.5. Driver activity data

            6. 5.2.6. Places where daily work periods start and/or end

            7. 5.2.7. Events data

            8. 5.2.8. Faults data

            9. 5.2.9. Control activity data

            10. 5.2.10. Card session data

            11. 5.2.11. Specific conditions data

          3. 5.3. Workshop card

            1. 5.3.1. Security elements

            2. 5.3.2. Card identification

            3. 5.3.3. Card holder identification

            4. 5.3.4. Vehicles used data

            5. 5.3.5. Driver activity data

            6. 5.3.6. Daily work periods start and/or end data

            7. 5.3.7. Events and faults data

            8. 5.3.8. Control activity data

            9. 5.3.9. Calibration and time adjustment data

            10. 5.3.10. Specific conditions data

          4. 5.4. Control card

            1. 5.4.1. Card identification

            2. 5.4.2. Card holder identification

            3. 5.4.3. Control activity data

          5. 5.5. Company card

            1. 5.5.1. Card identification

            2. 5.5.2. Card holder identification

            3. 5.5.3. Company activity data

      5. V. INSTALLATION OF RECORDING EQUIPMENT

        1. 1. Installation

        2. 2. Installation plaque

        3. 3. Sealing

      6. VI. CHECKS, INSPECTIONS AND REPAIRS

        1. 1. Approval of fitters or workshops

        2. 2. Check of new or repaired instruments

        3. 3. Installation inspection

        4. 4. Periodic inspections

        5. 5. Measurement of errors

        6. 6. Repairs

      7. VII. CARD ISSUING

      8. VIII. TYPE APPROVAL OF RECORDING EQUIPMENT AND TACHOGRAPH CARDS

        1. 1. General points

        2. 2. Security certificate

        3. 3. Functional certificate

        4. 4. Interoperability certificate

        5. 5. Type approval certificate

        6. 6. Exceptional procedure: first interoperability certificates

      9. Appendix 1

        DATA DICTIONARY

        1. 1. INTRODUCTION

          1. 1.1. Approach for definitions of data types

          2. 1.2. References

        2. 2. DATA TYPE DEFINITIONS

          1. 2.1. ActivityChangeInfo

            1. Note for the case ‘ card withdrawal ’ :

          2. 2.2. Address

          3. 2.3. BCDString

          4. 2.4. CalibrationPurpose

          5. 2.5. CardActivityDailyRecord

          6. 2.6. CardActivityLengthRange

          7. 2.7. CardApprovalNumber

          8. 2.8. CardCertificate

          9. 2.9. CardChipIdentification

          10. 2.10. CardConsecutiveIndex

          11. 2.11. CardControlActivityDataRecord

          12. 2.12. CardCurrentUse

          13. 2.13. CardDriverActivity

          14. 2.14. CardDrivingLicenceInformation

          15. 2.15. CardEventData

          16. 2.16. CardEventRecord

          17. 2.17. CardFaultData

          18. 2.18. CardFaultRecord

          19. 2.19. CardIccIdentification

          20. 2.20. CardIdentification

          21. 2.21. CardNumber

          22. 2.22. CardPlaceDailyWorkPeriod

          23. 2.23. CardPrivateKey

          24. 2.24. CardPublicKey

          25. 2.25. CardRenewalIndex

          26. 2.26. CardReplacementIndex

          27. 2.27. CardSlotNumber

          28. 2.28. CardSlotsStatus

          29. 2.29. CardStructureVersion

          30. 2.30. CardVehicleRecord

          31. 2.31. CardVehiclesUsed

          32. 2.32. Certificate

          33. 2.33. CertificateContent

          34. 2.34. CertificateHolderAuthorisation

          35. 2.35. CertificateRequestID

          36. 2.36. CertificationAuthorityKID

          37. 2.37. CompanyActivityData

          38. 2.38. CompanyActivityType

          39. 2.39. CompanyCardApplicationIdentification

          40. 2.40. CompanyCardHolderIdentification

          41. 2.41. ControlCardApplicationIdentification

          42. 2.42. ControlCardControlActivityData

          43. 2.43. ControlCardHolderIdentification

          44. 2.44. ControlType

          45. 2.45. CurrentDateTime

          46. 2.46. DailyPresenceCounter

          47. 2.47. Datef

          48. 2.48. Distance

          49. 2.49. DriverCardApplicationIdentification

          50. 2.50. DriverCardHolderIdentification

          51. 2.51. EntryTypeDailyWorkPeriod

          52. 2.52. EquipmentType

          53. 2.53. EuropeanPublicKey

          54. 2.54. EventFaultType

          55. 2.55. EventFaultRecordPurpose

          56. 2.56. ExtendedSerialNumber

          57. 2.57. FullCardNumber

          58. 2.58. HighResOdometer

          59. 2.59. HighResTripDistance

          60. 2.60. HolderName

          61. 2.61. K-ConstantOfRecordingEquipment

          62. 2.62. KeyIdentifier

          63. 2.63. L-TyreCircumference

          64. 2.64. Language

          65. 2.65. LastCardDownload

          66. 2.66. ManualInputFlag

          67. 2.67. ManufacturerCode

          68. 2.68. MemberStateCertificate

          69. 2.69. MemberStatePublicKey

          70. 2.70. Name

          71. 2.71. NationAlpha

          72. 2.72. NationNumeric

          73. 2.73. NoOfCalibrationRecords

          74. 2.74. NoOfCalibrationsSinceDownload

          75. 2.75. NoOfCardPlaceRecords

          76. 2.76. NoOfCardVehicleRecords

          77. 2.77. NoOfCompanyActivityRecords

          78. 2.78. NoOfControlActivityRecords

          79. 2.79. NoOfEventsPerType

          80. 2.80. NoOfFaultsPerType

          81. 2.81. OdometerValueMidnight

          82. 2.82. OdometerShort

          83. 2.83. OverspeedNumber

          84. 2.84. PlaceRecord

          85. 2.85. PreviousVehicleInfo

          86. 2.86. PublicKey

          87. 2.87. RegionAlpha

          88. 2.88. RegionNumeric

          89. 2.89. RSAKeyModulus

          90. 2.90. RSAKeyPrivateExponent

          91. 2.91. RSAKeyPublicExponent

          92. 2.92. SensorApprovalNumber

          93. 2.93. SensorIdentification

          94. 2.94. SensorInstallation

          95. 2.95. SensorInstallationSecData

          96. 2.96. SensorOSIdentifier

          97. 2.97. SensorPaired

          98. 2.98. SensorPairingDate

          99. 2.99. SensorSerialNumber

          100. 2.100. SensorSCIdentifier

          101. 2.101. Signature

          102. 2.102. SimilarEventsNumber

          103. 2.103. SpecificConditionType

          104. 2.104. SpecificConditionRecord

          105. 2.105. Speed

          106. 2.106. SpeedAuthorised

          107. 2.107. SpeedAverage

          108. 2.108. SpeedMax

          109. 2.109. TDesSessionKey

          110. 2.110. TimeReal

          111. 2.111. TyreSize

          112. 2.112. VehicleIdentificationNumber

          113. 2.113. VehicleRegistrationIdentification

          114. 2.114. VehicleRegistrationNumber

          115. 2.115. VuActivityDailyData

          116. 2.116. VuApprovalNumber

          117. 2.117. VuCalibrationData

          118. 2.118. VuCalibrationRecord

          119. 2.119. VuCardIWData

          120. 2.120. VuCardIWRecord

          121. 2.121. VuCertificate

          122. 2.122. VuCompanyLocksData

          123. 2.123. VuCompanyLocksRecord

          124. 2.124. VuControlActivityData

          125. 2.125. VuControlActivityRecord

          126. 2.126. VuDataBlockCounter

          127. 2.127. VuDetailedSpeedBlock

          128. 2.128. VuDetailedSpeedData

          129. 2.129. VuDownloadablePeriod

          130. 2.130. VuDownloadActivityData

          131. 2.131. VuEventData

          132. 2.132. VuEventRecord

          133. 2.133. VuFaultData

          134. 2.134. VuFaultRecord

          135. 2.135. VuIdentification

          136. 2.136. VuManufacturerAddress

          137. 2.137. VuManufacturerName

          138. 2.138. VuManufacturingDate

          139. 2.139. VuOverSpeedingControlData

          140. 2.140. VuOverSpeedingEventData

          141. 2.141. VuOverSpeedingEventRecord

          142. 2.142. VuPartNumber

          143. 2.143. VuPlaceDailyWorkPeriodData

          144. 2.144. VuPlaceDailyWorkPeriodRecord

          145. 2.145. VuPrivateKey

          146. 2.146. VuPublicKey

          147. 2.147. VuSerialNumber

          148. 2.148. VuSoftInstallationDate

          149. 2.149. VuSoftwareIdentification

          150. 2.150. VuSoftwareVersion

          151. 2.151. VuSpecificConditionData

          152. 2.152. VuTimeAdjustmentData

          153. 2.153. VuTimeAdjustmentRecord

          154. 2.154. W-VehicleCharacteristicConstant

          155. 2.155. WorkshopCardApplicationIdentification

          156. 2.156. WorkshopCardCalibrationData

          157. 2.157. WorkshopCardCalibrationRecord

          158. 2.158. WorkshopCardHolderIdentification

          159. 2.159. WorkshopCardPIN

        3. 3. VALUE AND SIZE RANGE DEFINITIONS

          1. 3.1. Definitions for the Driver Card:

          2. 3.2. Definitions for the Workshop Card:

          3. 3.3. Definitions for the Control Card:

          4. 3.4. Definitions for the Company Card:

        4. 4. CHARACTER SETS

        5. 5. ENCODING

      10. Appendix 2

        TACHOGRAPH CARDS SPECIFICATION

        1. 1. INTRODUCTION

          1. 1.1. Abbreviations

          2. 1.2. References

        2. 2. ELECTRICAL AND PHYSICAL CHARACTERISTICS

          1. 2.1. Supply voltage and current consumption

          2. 2.2. Programming voltage V pp

          3. 2.3. Clock generation and frequency

          4. 2.4. I/O contact

          5. 2.5. States of the card

        3. 3. HARDWARE AND COMMUNICATION

          1. 3.1. Introduction

          2. 3.2. Transmission protocol

            1. 3.2.1. Protocols

            2. 3.2.2. ATR

            3. 3.2.3. PTS

          3. 3.3. Access conditions (AC)

          4. 3.4. Data encryption

          5. 3.5. Commands and error codes overview

          6. 3.6. Commands description

            1. 3.6.1. Select file

              1. 3.6.1.1. Selection by name (AID)

              2. 3.6.1.2. Selection of an elementary file using its file identifier

            2. 3.6.2. Read Binary

              1. 3.6.2.1. Command without secure messaging

              2. 3.6.2.2. Command with secure messaging

            3. 3.6.3. Update Binary

              1. 3.6.3.1. Command without secure messaging

              2. 3.6.3.2. Command with secure messaging

            4. 3.6.4. Get challenge

            5. 3.6.5. Verify

            6. 3.6.6. Get response

            7. 3.6.7. PSO: verify certificate

            8. 3.6.8. Internal authenticate

            9. 3.6.9. External authenticate

            10. 3.6.10. Manage security environment

            11. 3.6.11. PSO: hash

            12. 3.6.12. Perform hash of file

            13. 3.6.13. PSO: compute digital signature

            14. 3.6.14. PSO: verify digital signature

        4. 4. TACHOGRAPH CARDS STRUCTURE

          1. 4.1. Driver card structure

          2. 4.2. Workshop card structure

          3. 4.3. Control card structure

          4. 4.4. Company card structure

      11. Appendix 3

        PICTOGRAMS

        1. The recording equipment may optionally use the following pictograms and...

        2. BASIC PICTOGRAMS People Actions Modes of operation Company Company mode...

      12. Appendix 4

        PRINTOUTS

        1. 1. GENERALITIES

        2. 2. DATA BLOCKS SPECIFICATION

        3. 3. PRINTOUT SPECIFICATIONS

          1. 3.1. Driver Activities from Card Daily Printout

          2. 3.2. Driver Activities from daily VU printout

          3. 3.3. Events and faults from card printout

          4. 3.4. Events and faults from VU printout

          5. 3.5. Technical data printout

          6. 3.6. Over speeding printout

      13. Appendix 5

        DISPLAY

        1. In this appendix the following format notation conventions have been...

        2. characters printed in bold denote plain text to be displayed...

        3. The recording equipment shall display data using the following formats:...

      14. Appendix 6

        EXTERNAL INTERFACES

        1. 1. HARDWARE

          1. 1.1. Connector

          2. 1.2. Contact allocation

          3. 1.3. Block diagram

        2. 2. DOWNLOADING INTERFACE

        3. 3. CALIBRATION INTERFACE

      15. Appendix 7

        DATA DOWNLOADING PROTOCOLS

        1. 1. INTRODUCTION

          1. 1.1. Scope

          2. 1.2. Acronyms and notations

        2. 2. VU DATA DOWNLOADING

          1. 2.1. Download procedure

          2. 2.2. Data download protocol

            1. 2.2.1. Message structure

            2. 2.2.2. Message types

              1. 2.2.2.1. Start communication request (SID 81)

              2. 2.2.2.2. Positive response start communication (SID C1)

              3. 2.2.2.3. Start diagnostic session request (SID 10)

              4. 2.2.2.4. Positive response start diagnostic (SID 50)

              5. 2.2.2.5. Link control service (SID 87)

              6. 2.2.2.6. Link control positive response (SID C7)

              7. 2.2.2.7. Request upload (SID 35)

              8. 2.2.2.8. Positive response request upload (SID 75)

              9. 2.2.2.9. Transfer data request (SID 36)

              10. 2.2.2.10. Positive response transfer data (SID 76)

              11. 2.2.2.11. Request transfer exit (SID 37)

              12. 2.2.2.12. Positive response request transfer exit (SID 77)

              13. 2.2.2.13. Stop communication request (SID 82)

              14. 2.2.2.14. Positive response stop communication (SID C2)

              15. 2.2.2.15. Acknowledge submessage (SID 83)

              16. 2.2.2.16. Negative Response (SID 7F)

            3. 2.2.3. Message flow

            4. 2.2.4. Timing

            5. 2.2.5. Error handling

              1. 2.2.5.1. Start communication phase

              2. 2.2.5.2. Communication phase

            6. 2.2.6. Response message content

              1. 2.2.6.1. Positive response transfer data overview

              2. 2.2.6.2. Positive response transfer data activities

              3. 2.2.6.3. Positive response transfer data events and faults

              4. 2.2.6.4. Positive response transfer data detailed speed

              5. 2.2.6.5. Positive response transfer data technical data

          3. 2.3. ESM File storage

        3. 3. TACHOGRAPH CARDS DOWNLOADING PROTOCOL

          1. 3.1. Scope

          2. 3.2. Definitions

          3. 3.3. Card downloading

            1. 3.3.1. Initialisation sequence

            2. 3.3.2. Sequence for unsigned data files

            3. 3.3.3. Sequence for signed data files

            4. 3.3.4. Sequence for resetting the calibration counter

          4. 3.4. Data storage format

            1. 3.4.1. Introduction

            2. 3.4.2. File format

        4. 4. DOWNLOADING A TACHOGRAPH CARD VIA A VEHICLE UNIT

      16. Appendix 8

        CALIBRATION PROTOCOL

        1. 1. INTRODUCTION

        2. 2. TERMS, DEFINITIONS AND REFERENCES

        3. 3. OVERVIEW OF SERVICES

          1. 3.1. Services available

          2. 3.2. Response codes

        4. 4. COMMUNICATION SERVICES

          1. 4.1. StartCommunication Service

          2. 4.2. StopCommunication service

            1. 4.2.1. Message description

            2. 4.2.2. Message format

            3. 4.2.3. Parameter definition

          3. 4.3. TesterPresent service

            1. 4.3.1. Message description

            2. 4.3.2. Message format

        5. 5. MANAGEMENT SERVICES

          1. 5.1. StartDiagnosticSession service

            1. 5.1.1. Message description

            2. 5.1.2. Message format

            3. 5.1.3. Parameter definition

          2. 5.2. SecurityAccess service

            1. 5.2.1. Message description

            2. 5.2.2. Message format — SecurityAccess — requestSeed

            3. 5.2.3. Message format — SecurityAccess — sendKey

        6. 6. DATA TRANSMISSION SERVICES

          1. 6.1. ReadDataByIdentifier service

            1. 6.1.1. Message description

            2. 6.1.2. Message format

            3. 6.1.3. Parameter definition

          2. 6.2. WriteDataByIdentifier service

            1. 6.2.1. Message description

            2. 6.2.2. Message format

            3. 6.2.3. Parameter definition

        7. 7. CONTROL OF TEST PULSES — INPUT/OUTPUT CONTROL FUNCTIONAL UNIT

          1. 7.1. Message description

            1. 7.1.1. Message description

            2. 7.1.2. Message format

            3. 7.1.3. Parameter definition

        8. 8. DATARECORDS FORMATS

          1. 8.1. Transmitted parameter ranges

          2. 8.2. dataRecords formats

      17. Appendix 9

        TYPE APPROVAL — LIST OF MINIMUM REQUIRED TESTS

        1. 1. INTRODUCTION

          1. 1.1. Type approval

          2. 1.2. References

        2. 2. VEHICLE UNIT FUNCTIONAL TESTS

        3. 3. MOTION SENSOR FUNCTIONAL TESTS

        4. 4. TACHOGRAPH CARDS FUNCTIONAL TESTS

        5. 5. INTEROPERABILITY TESTS

      18. Appendix 10

        GENERIC SECURITY TARGETS

        2. MOTION SENSOR GENERIC SECURITY TARGET

          1. 1. Introduction

          2. 2. Abbreviations, definitions and references

            1. 2.1. Abbreviations

            2. 2.2. Definitions

            3. 2.3. References

          3. 3. Product rationale

            1. 3.1. Motion sensor description and method of use

            2. 3.2. Motion sensor life cycle

            3. 3.3. Threats

              1. 3.3.1. Threats to access control policies

              2. 3.3.2. Design related threats

              3. 3.3.3. Operation oriented threats

            4. 3.4. Security objectives

            5. 3.5. Information technology security objectives

            6. 3.6. Physical, personnel or procedural means

              1. 3.6.1. Equipment design

              2. 3.6.2. Equipment delivery

              3. 3.6.3. Security data generation and delivery

              4. 3.6.4. Recording equipment installation, calibration, and inspection

              5. 3.6.5. Law enforcement control

              6. 3.6.6. Software upgrades

          4. 4. Security enforcing functions

            1. 4.1. Identification and authentication

            2. 4.2. Access control

              1. 4.2.1. Access control policy

              2. 4.2.2. Data access rights

              3. 4.2.3. File structure and access conditions

            3. 4.3. Accountability

            4. 4.4. Audit

            5. 4.5. Accuracy

              1. 4.5.1. Information flow control policy

              2. 4.5.2. Internal data transfers

              3. 4.5.3. Stored data integrity

            6. 4.6. Reliability of service

              1. 4.6.1 Tests

              2. 4.6.2. Software

              3. 4.6.3. Physical protection

              4. 4.6.4. Power supply interruptions

              5. 4.6.5. Reset conditions

              6. 4.6.6. Data availability

              7. 4.6.7. Multiple applications

            7. 4.7. Data exchange

            8. 4.8. Cryptographic support

          5. 5. Definition of security mechanisms

          6. 6. Minimum strength of security mechanisms

          7. 7. Level of assurance

          8. 8. Rationale

        3. VEHICLE UNIT GENERIC SECURITY TARGET

          1. 1. Introduction

          2. 2. Abbreviations, definitions and references

            1. 2.1. Abbreviations

            2. 2.2. Definitions

            3. 2.3. References

          3. 3. Product rationale

            1. 3.1. Vehicle unit description and method of use

            2. 3.2. Vehicle unit life cycle

            3. 3.3. Threats

              1. 3.3.1. Threats to identification and access control policies

              2. 3.3.2. Design related threats

              3. 3.3.3. Operation oriented threats

            4. 3.4. Security objectives

            5. 3.5. Information technology security objectives

            6. 3.6. Physical, personnel or procedural means

              1. 3.6.1. Equipment design

              2. 3.6.2. Equipment delivery and activation

              3. 3.6.3. Security data generation and delivery

              4. 3.6.4. Cards delivery

              5. 3.6.5. Recording equipment installation, calibration, and inspection

              6. 3.6.6. Equipment operation

              7. 3.6.7. Law enforcement control

              8. 3.6.8. Software upgrades

          4. 4. Security enforcing functions

            1. 4.1. Identification and authentication

              1. 4.1.1. Motion sensor identification and authentication

              2. 4.1.2. User identification and authentication

              3. 4.1.3. Remotely connected company identification and authentication

              4. 4.1.4. Management device identification and authentication

            2. 4.2. Access control

              1. 4.2.1. Access control policy

              2. 4.2.2. Access rights to functions

              3. 4.2.3. Access rights to data

              4. 4.2.4. File structure and access conditions

            3. 4.3. Accountability

            4. 4.4. Audit

            5. 4.5. Object re-use

            6. 4.6. Accuracy

              1. 4.6.1. Information flow control policy

              2. 4.6.2. Internal data transfers

              3. 4.6.3. Stored data integrity

            7. 4.7. Reliability of service

              1. 4.7.1. Tests

              2. 4.7.2. Software

              3. 4.7.3. Physical protection

              4. 4.7.4. Power supply interruptions

              5. 4.7.5. Reset conditions

              6. 4.7.6. Data availability

              7. 4.7.7. Multiple applications

            8. 4.8. Data exchange

              1. 4.8.1. Data exchange with motion sensor

              2. 4.8.2. Data exchange with tachograph cards

              3. 4.8.3. Data exchange with external storage media (downloading function)

            9. 4.9. Cryptographic support

          5. 5. Definition of security mechanisms

          6. 6. Minimum strength of security mechanisms

          7. 7. Level of assurance

          8. 8. Rationale

        4. TACHOGRAPH CARD GENERIC SECURITY TARGET

          1. 1. Introduction

          2. 2. Abbreviations, definitions and references

            1. 2.1. Abbreviations

            2. 2.2. Definitions

            3. 2.3. References

          3. 3. Product Rationale

            1. 3.1. Tachograph card description and method of use

            2. 3.2. Tachograph card life cycle

            3. 3.3. Threats

              1. 3.3.1. Final aims

              2. 3.3.2. Attack paths

            4. 3.4. Security Objectives

            5. 3.5. Information technology security objectives

            6. 3.6. Physical, personnel or procedural means

          4. 4. Security enforcing functions

            1. 4.1. Compliance to protection profiles

            2. 4.2. User identification and authentication

              1. 4.2.1. User identification

              2. 4.2.2. User authentication

              3. 4.2.3. Authentication failures

            3. 4.3. Access control

              1. 4.3.1. Access control policy

              2. 4.3.2. Access control functions

            4. 4.4. Accountability

            5. 4.5. Audit

            6. 4.6. Accuracy

              1. 4.6.1. Stored data integrity

              2. 4.6.2. Basic data authentication

            7. 4.7. Reliability of service

              1. 4.7.1. Tests

              2. 4.7.2. Software

              3. 4.7.3. Power supply

              4. 4.7.4. Reset conditions

            8. 4.8. Data exchange

              1. 4.8.1. Data exchange with a vehicle unit

              2. 4.8.2. Export of data to a non-vehicle unit (download function)

            9. 4.9. Cryptographic support

          5. 5. Definition of security mechanisms

          6. 6. Claimed minimum strength of mechanisms

          7. 7. Level of Assurance

          8. 8. Rationale

      19. Appendix 11

        COMMON SECURITY MECHANISMS

        1. 1. GENERALITIES

          1. 1.1. References

          2. 1.2. Notations and abbreviated terms

        2. 2. CRYPTOGRAPHIC SYSTEMS AND ALGORITHMS

          1. 2.1. Cryptographic systems

          2. 2.2. Cryptographic algorithms

            1. 2.2.1. RSA algorithm

            2. 2.2.2. Hash algorithm

            3. 2.2.3. Data encryption algorithm

        3. 3. KEYS AND CERTIFICATES

          1. 3.1. Keys generation and distribution

            1. 3.1.1. RSA keys generation and distribution

            2. 3.1.2. RSA test keys

            3. 3.1.3. Motion sensor keys

            4. 3.1.4. T-DES session keys generation and distribution

          2. 3.2. Keys

          3. 3.3. Certificates

            1. 3.3.1. Certificates content

              1. Notes:

                1. 1. The ‘ Certificate Profile Identifier ’ (CPI) delineates the exact...

                2. 2. The ‘ Certification Authority Reference ’ (CAR) has the purpose...

                3. 3. The ‘ Certificate Holder Authorisation ’ ((CHA) is used to...

                4. 4. ‘ Certificate Holder Reference ’ (CHR) has the purpose of...

                5. 5. Key Identifiers uniquely identify certificate holder or certification authorities. They...

                6. 6. Certificate verifiers shall implicitly know that the public key certified...

            2. 3.3.2. Certificates issued

              1. Notes:

                1. 1. This certificate is 194 bytes long.

                2. 2. CAR, being hidden by the signature, is also appended to...

                3. 3. The certificate verifier shall implicitly know the algorithm used by...

                4. 4. The headerlist associated with this issued certificate is as follows:...

            3. 3.3.3. Certificate verification and unwrapping

        4. 4. MUTUAL AUTHENTICATION MECHANISM

        5. 5. VU-CARDS DATA TRANSFER CONFIDENTIALITY, INTEGRITY AND AUTHENTICATION MECHANISMS

          1. 5.1. Secure messaging

          2. 5.2. Treatment of secure messaging errors

          3. 5.3. Algorithm to compute cryptographic checksums

          4. 5.4. Algorithm to compute cryptograms for confidentiality DOs

        6. 6. DATA DOWNLOAD DIGITAL SIGNATURE MECHANISMS

          1. 6.1. Signature generation

          2. 6.2. Signature verification

      20. Appendix 12

        ADAPTOR FOR M 1 AND N1 CATEGORY VEHICLES

        1. 1. ABBREVIATIONS AND REFERENCE DOCUMENTS

          1. 1.1. Abbreviations

          2. 1.2. Reference standards

        2. 2. GENERAL CHARACTERISTICS AND FUNCTIONS OF THE ADAPTOR

          1. 2.1. Adaptor general description

          2. 2.2. Functions

          3. 2.3. Security

        3. 3. REQUIREMENTS FOR THE RECORDING EQUIPMENT WHEN AN ADAPTOR IS INSTALLED...

        4. 4. CONSTRUCTION AND FUNCTIONAL REQUIREMENTS FOR THE ADAPTOR

          1. 4.1. Interfacing and adapting incoming speed pulses

          2. 4.2. Inducing the incoming pulses to the embedded motion sensor

          3. 4.3. Embedded motion sensor

          4. 4.4. Security requirements

          5. 4.5. Performance characteristics

          6. 4.6. Materials

          7. 4.7. Markings

        5. 5. INSTALLATION OF THE RECORDING EQUIPMENT WHEN AN ADAPTOR IS USED...

          1. 5.1. Installation

          2. 5.2. Sealing

        6. 6. CHECKS, INSPECTIONS AND REPAIRS

          1. 6.1. Periodic inspections

        7. 7. TYPE APPROVAL OF RECORDING EQUIPMENT WHEN AN ADAPTOR IS USED...

          1. 7.1. General points

          2. 7.2. Functional certificate

    3. ANNEX II

      APPROVAL MARK AND CERTIFICATE

      1. I. APPROVAL MARK

        1. 1. The approval mark shall be made up of:

        2. 2. The approval mark shall be shown on the descriptive plaque...

        3. 3. The dimensions of the approval mark drawn below are expressed...

      2. II. APPROVAL CERTIFICATE FOR PRODUCTS COMPLIANT WITH ANNEX I

      3. III. APPROVAL CERTIFICATE FOR PRODUCTS COMPLIANT WITH ANNEX I B

Yn ôl i’r brig

Options/Cymorth

Print Options

You have chosen to open the Whole Regulation

The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

Y Rhestrau you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Mae deddfwriaeth ar gael mewn fersiynau gwahanol:

Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.

Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

Dewisiadau Agor

Dewisiadau gwahanol i agor deddfwriaeth er mwyn gweld rhagor o gynnwys ar y sgrin ar yr un pryd

Close

Rhagor o Adnoddau

Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:

  • y PDF print gwreiddiol y fel adopted version that was used for the EU Official Journal
  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • pob fformat o’r holl ddogfennau cysylltiedig
  • slipiau cywiro
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Close

Llinell Amser Newidiadau

Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.

Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.

Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.

Close

Rhagor o Adnoddau

Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:

  • y PDF print gwreiddiol y fel adopted fersiwn a ddefnyddiwyd am y copi print
  • slipiau cywiro

liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys

  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill

Mae'r data ar y dudalen hon ar gael yn y fformatau data amgen a restrir: