- Latest available (Revised)
- Original (As made)
The Materials and Articles in Contact with Food (Scotland) Regulations 2012
You are here:
What Version
More Resources
Status:
This is the original version (as it was originally made).
Regulation 14(1)
SCHEDULE 1SPECIFIED PROVISIONS OF REGULATION 10/2011
This schedule has no associated Policy Notes
Specified provision | Subject matter |
|---|---|
| Article 4(e) as read with Articles 17 and 18 | Prohibition on placing on the market plastic materials or articles if they do not meet specified compositional and declaration requirements |
| Article 5(1) and Annex I, as read with Article 6 | Requirement, subject to certain derogations, to use only authorised substances in the manufacture of plastic layers in plastic materials and articles |
| Article 8, first sentence | General quality and purity standards that must be observed for substances used in the manufacture of plastic layers in plastic materials and articles |
| Article 9 as read with Annex I | Particular restrictions and specifications for substances used in the manufacture of plastic layers in plastic materials and articles |
| Article 10 as read with Annex II | General restrictions on plastic materials and articles |
| Article 11(1) and (2) and Annex I, as read with Article 11(3) | Specific limits on the degree to which constituents of plastic materials and articles are permitted to migrate into foods |
| Article 12 | Overall limits on the permitted level of migration of the constituents of plastic materials and articles into food simulants |
| Article 13(1),(3),(4) and (5) and Annex I, as read with Article 13(2) | Particular restrictions and specifications for the composition of each plastic layer in plastic multi-layer materials and articles |
| Article 14(1) and (5) and Annex 1, as read with Article 14(2), (3) and (4) | Particular restrictions and specifications for the composition of each plastic layer in multi-material multi-layer materials and articles |
| Article 15 and Annex IV | Requirements that written declaration of compliance for plastic materials and articles, for products from the intermediate stages of their manufacture and for substances intended for the manufacture of those materials or articles should be available at the marketing stages other than the retail stage |
Options/Help
Print Options
PrintThe Whole Instrument
PrintThis Schedule only
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Opening Options
Different options to open legislation in order to view more content on screen at once
Policy Note
Policy Note sets out a brief statement of the purpose of a Scottish Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Scottish Statutory Instrument accessible to readers who are not legally qualified and accompany any Scottish Statutory Instrument or Draft Scottish Statutory Instrument laid before the Scottish Parliament from July 2012 onwards. Prior to this date these type of notes existed as ‘Executive Notes’ and accompanied Scottish Statutory Instruments from July 2005 until July 2012.
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as enacted version that was used for the print copy
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as made version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.