- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
44.—(1) Heating iron, steel or any ferrous-alloy, non ferrous metal or non-ferrous metal alloy, in one or more furnaces or other appliances the primary combustion chambers of which have in aggregate a net rated thermal input of less than 0.2 megawatts, for the purpose of removing grease, oil or any other non-metallic contaminant.
(2) Sub-paragraph (1) does not apply to the removal by heat of plastic or rubber covering from scrap cable or of any asbestos contaminant.
(3) In the case of a process involving the heating of iron, steel or any ferrous-alloy, sub‑paragraph (1) does not apply if that process is related to a process described in any of paragraphs (a) to (h), or (j) to (m), of Part A or paragraphs (a) to (c), or (e) or (f), of Part B of Section 2.1 of Schedule 1 to the 1991 Regulations or an activity described in Section 2.1 (other than in paragraph (d) of Part B) of Part 1 of Schedule 1 to the 2000 Regulations.
(4) In the case of a process involving the heating of any non-ferrous metal or non ferrous metal alloy, sub-paragraph (1) does not apply if that process is related to a process described in any of paragraphs (a) to (g), or (i) or (k), of Part A of Section 2.2 of Schedule 1 to the 1991 Regulations or an activity described in Part A of Section 2.2 of Part 1 of Schedule 1 to the 2000 Regulations.
(5) The secure storage of waste intended to be submitted to heating to which sub-paragraph (1) applies if the waste or, as the case may be, any container in which the waste is stored, is stored on an impermeable pavement which is provided with a sealed drainage system.
(6) In this paragraph, “net rated thermal input” means the rate at which fuel can be burned at the maximum continuous rating of the appliance multiplied by the net calorific value of the fuel and expressed as megawatts thermal.
(7) In this paragraph, “ferrous alloy” means an alloy of which iron is the largest constituent, or equal to the largest constituent, by weight, whether or not that alloy also has a non-ferrous metal content greater than any percentage specified in Section 2.2 of Schedule 1 to the 1991 Regulations, and “non-ferrous metal alloy” shall be construed accordingly.
(8) In this paragraph, “sealed drainage system” has the meaning given by paragraph 45(7).
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Executive Note sets out a brief statement of the purpose of a Scottish Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Scottish Statutory Instrument accessible to readers who are not legally qualified and accompany any Scottish Statutory Instrument or Draft Scottish Statutory Instrument laid before the Scottish Parliament from July 2005 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: