Search Legislation

Advanced Search

Commission Implementing Decision (EU) 2016/1032Show full title

Commission Implementing Decision (EU) 2016/1032 of 13 June 2016 establishing best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council, for the non-ferrous metals industries (notified under document C(2016) 3563) (Text with EEA relevance)

Help about what version

What Version

Close

This is a legislation item that originated from the EU

After exit day there will be three versions of this legislation to consult for different purposes. The legislation.gov.uk version is the version that applies in the UK. The EU Version currently on EUR-lex is the version that currently applies in the EU i.e you may need this if you operate a business in the EU.

The web archive version is the official version of this legislation item as it stood on exit day before being published to legislation.gov.uk and any subsequent UK changes and effects applied. The web archive also captured associated case law and other language formats from EUR-Lex.

Changes to legislation:

There are outstanding changes not yet made to Commission Implementing Decision (EU) 2016/1032. Those changes will be listed when you open the content using the Table of Contents below. Any changes that have already been made to the legislation appear in the content and are referenced with annotations. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the affected provisions when you open the content using the Table of Contents below.

View outstanding changes

Changes and effects yet to be applied to :

  1. Introductory Text

  2. Article 1.The best available techniques (BAT) conclusions for the non-ferrous metals...

  3. Article 2.This Decision is addressed to the Member States.

  4. Signature

    1. ANNEX

      BAT CONCLUSIONS FOR THE NON-FERROUS METALS INDUSTRIES

      1. SCOPE

      2. DEFINITIONS

      3. GENERAL CONSIDERATIONS

        1. Best Available Techniques

        2. Emission levels to air associated with BAT

        3. Averaging periods for emissions to air

        4. Averaging periods for emissions to water

      4. ACRONYMS

      5. 1.1. GENERAL BAT CONCLUSIONS

        1. 1.1.1. Environmental management systems (EMS)

          1. BAT 1. In order to improve the overall environmental performance, BAT is...

            1. Applicability

        2. 1.1.2. Energy management

          1. BAT 2. In order to use energy efficiently, BAT is to use...

        3. 1.1.3. Process control

          1. BAT 3. In order to improve overall environmental performance, BAT is to...

          2. BAT 4. In order to reduce channelled dust and metal emissions to...

        4. 1.1.4. Diffuse emissions

          1. 1.1.4.1. General approach for the prevention of diffuse emissions

            1. BAT 5. In order to prevent or, where this is not practicable,...

            2. BAT 6. In order to prevent or, where this is not practicable,...

          2. 1.1.4.2. Diffuse emissions from the storage, handling and transport of raw...

            1. BAT 7. In order to prevent diffuse emissions from the storage of...

              1. Applicability

            2. BAT 8. In order to prevent diffuse emissions from the handling and...

              1. Applicability

          3. 1.1.4.3. Diffuse emissions from metal production

            1. BAT 9. In order to prevent or, where this is not practicable,...

        5. 1.1.5. Monitoring of emissions to air

          1. BAT 10. BAT is to monitor the stack emissions to air with...

        6. 1.1.6. Mercury emissions

          1. BAT 11. In order to reduce mercury emissions to air (other than...

        7. 1.1.7. Sulphur dioxide emissions

          1. BAT 12. In order to reduce emissions of SO2 from off-gases with...

            1. Applicability

        8. 1.1.8. NOX emissions

          1. BAT 13. In order to prevent NOX emissions to air from a...

        9. 1.1.9. Emissions to water, including their monitoring

          1. BAT 14. In order to prevent or reduce the generation of waste...

          2. BAT 15. In order to prevent the contamination of water and to...

            1. Applicability

          3. BAT 16. BAT is to use ISO 5667 for water sampling and...

          4. BAT 17. In order to reduce emissions to water, BAT is to...

            1. BAT-associated emission levels

        10. 1.1.10. Noise

          1. BAT 18. In order to reduce noise emissions, BAT is to use...

        11. 1.1.11. Odour

          1. BAT 19. In order to reduce odour emissions, BAT is to use...

      6. 1.2. BAT CONCLUSIONS FOR COPPER PRODUCTION

        1. 1.2.1. Secondary materials

          1. BAT 20. In order to increase the secondary materials’ recovery yield from...

        2. 1.2.2. Energy

          1. BAT 21. In order to use energy efficiently in primary copper production,...

          2. BAT 22. In order to use energy efficiently in secondary copper production,...

          3. BAT 23. In order to use energy efficiently in electrorefining and electrowinning...

        3. 1.2.3. Air emissions

          1. BAT 24. In order to reduce secondary emissions to air from furnaces...

            1. Description

            2. Applicability

          2. 1.2.3.1. Diffuse emissions

            1. BAT 25. In order to prevent or reduce diffuse emissions from pretreatment...

            2. BAT 26. In order to prevent or reduce diffuse emissions from charging,...

            3. BAT 27. In order to reduce diffuse emissions from Peirce-Smith converter (PS)...

            4. BAT 28. In order to reduce diffuse emissions from a Hoboken converter...

            5. BAT 29. In order to reduce diffuse emissions from the matte conversion...

              1. Applicability

            6. BAT 30. In order to reduce diffuse emissions from a top-blown rotary...

            7. BAT 31. In order to reduce diffuse emissions from copper recovery with...

            8. BAT 32. In order to reduce diffuse emissions from copper-rich slag furnace...

            9. BAT 33. In order to reduce diffuse emissions from anode casting in...

            10. BAT 34. In order to reduce diffuse emissions from electrolysis cells, BAT...

            11. BAT 35. In order to reduce diffuse emissions from the casting of...

            12. BAT 36. In order to reduce diffuse emissions from non-acid and acid...

          3. 1.2.3.2. Channelled dust emissions

            1. BAT 37. In order to reduce dust and metal emissions to air...

            2. BAT 38. In order to reduce dust and metal emissions to air...

              1. Applicability

            3. BAT 39. In order to reduce dust and metal emissions to air...

            4. BAT 40. In order to reduce dust and metal emissions to air...

            5. BAT 41. In order to reduce dust and metal emissions to air...

            6. BAT 42. In order to reduce dust and metal emissions to air...

            7. BAT 43. In order to reduce dust and metal emissions to air...

            8. BAT 44. In order to reduce dust and metal emissions to air...

            9. BAT 45. In order to reduce dust and metal emissions to air...

          4. 1.2.3.3. Organic compound emissions

            1. BAT 46. In order to reduce organic compound emissions to air from...

            2. BAT 47. In order to reduce organic compound emissions to air from...

            3. BAT 48. In order to reduce PCDD/F emissions to air from the...

          5. 1.2.3.4. Sulphur dioxide emissions

            1. BAT 49. In order to reduce SO2 emissions (other than those that...

          6. 1.2.3.5. Acid emissions

            1. BAT 50. In order to reduce acid gas emissions to air from...

        4. 1.2.4. Soil and groundwater

          1. BAT 51. In order to prevent soil and groundwater contamination from copper...

          2. BAT 52. In order to prevent soil and groundwater contamination from the...

        5. 1.2.5. Waste water generation

          1. BAT 53. In order to prevent the generation of waste water from...

        6. 1.2.6. Waste

          1. BAT 54. In order to reduce the quantities of waste sent for...

      7. 1.3. BAT CONCLUSIONS FOR ALUMINIUM PRODUCTION INCLUDING ALUMINA AND ANODE PRODUCTION...

        1. 1.3.1. Alumina production

          1. 1.3.1.1. Energy

            1. BAT 55. In order to use energy efficiently during the production of...

          2. 1.3.1.2. Air emissions

            1. BAT 56. In order to reduce dust and metal emissions from alumina...

          3. 1.3.1.3. Waste

            1. BAT 57. In order to reduce the quantities of waste sent for...

        2. 1.3.2. Anode production

          1. 1.3.2.1. Air emissions

            1. 1.3.2.1.1. Dust, PAH and fluoride emissions from the paste plant

              1. BAT 58. In order to reduce dust emissions to air from a...

              2. BAT 59. In order to reduce dust and PAH emissions to air...

            2. 1.3.2.1.2. Dust, sulphur dioxide, PAH and fluoride emissions from the baking...

              1. BAT 60. In order to reduce dust, sulphur dioxide, PAH and fluoride...

              2. BAT 61. In order to reduce dust, PAH and fluoride emissions to...

          2. 1.3.2.2. Waste water generation

            1. BAT 62. In order to prevent the generation of waste water from...

              1. Applicability

          3. 1.3.2.3. Waste

            1. BAT 63. In order to reduce the quantities of waste sent for...

              1. Applicability

        3. 1.3.3. Primary aluminium production

          1. 1.3.3.1. Air emissions

            1. BAT 64. In order to prevent or collect diffuse emissions from electrolytic...

              1. Description

            2. BAT 65. In order to prevent or collect diffuse emissions from electrolytic...

              1. Applicability

            3. 1.3.3.1.1. Channelled dust and fluoride emissions

              1. BAT 66. In order to reduce dust emissions from the storage, handling...

              2. BAT 67. In order to reduce dust, metal and fluoride emissions to...

            4. 1.3.3.1.2. Total emissions of dust and fluorides

              1. BAT 68. In order to prevent or reduce dust and metal emissions...

            5. 1.3.3.1.3. Sulphur dioxide emissions

              1. BAT 69. In order to reduce emissions to air from electrolytic cells,...

                1. Description

            6. 1.3.3.1.4. Perfluorocarbon emissions

              1. BAT 70. In order to reduce perfluorocarbon emissions to air from primary...

                1. Description

            7. 1.3.3.1.5. PAH and CO emissions

              1. BAT 71. In order to reduce CO and PAH emissions to air...

          2. 1.3.3.2. Waste water generation

            1. BAT 72. In order to prevent the generation of waste water, BAT...

              1. Applicability

          3. 1.3.3.3. Waste

            1. BAT 73. In order to reduce the disposal of spent pot lining,...

        4. 1.3.4. Secondary aluminium production

          1. 1.3.4.1. Secondary materials

            1. BAT 74. In order to increase the raw materials’ yield, BAT is...

          2. 1.3.4.2. Energy

            1. BAT 75. In order to use energy efficiently, BAT is to use...

          3. 1.3.4.3. Air emissions

            1. BAT 76. In order to prevent or reduce emissions to air, BAT...

              1. Applicability

            2. 1.3.4.3.1. Diffuse emissions

              1. BAT 77. In order to prevent or reduce diffuse emissions from the...

              2. BAT 78. In order to prevent or reduce diffuse emissions from the...

                1. Description

              3. BAT 79. In order to reduce emissions from skimmings/dross treatment, BAT is...

            3. 1.3.4.3.2. Channelled dust emissions

              1. BAT 80. In order to reduce dust and metal emissions from the...

              2. BAT 81. In order to reduce dust and metal emissions to air...

              3. BAT 82. In order to reduce dust and metal emissions to air...

            4. 1.3.4.3.3. Organic compound emissions

              1. BAT 83. In order to reduce emissions to air of organic compounds...

            5. 1.3.4.3.4. Acid emissions

              1. BAT 84. In order to reduce emissions to air of HCl, Cl2...

                1. Description

          4. 1.3.4.4. Waste

            1. BAT 85. In order to reduce the quantities of waste sent for...

            2. BAT 86. In order to reduce the quantities of salt slag produced...

        5. 1.3.5. Salt slag recycling process

          1. 1.3.5.1. Diffuse emissions

            1. BAT 87. In order to prevent or reduce diffuse emissions from the...

          2. 1.3.5.2. Channelled dust emissions

            1. BAT 88. In order to reduce dust and metal emissions to air...

          3. 1.3.5.3. Gaseous compounds

            1. BAT 89. In order to reduce gaseous emissions to air from wet...

      8. 1.4. BAT CONCLUSIONS FOR LEAD AND/OR TIN PRODUCTION

        1. 1.4.1. Air emissions

          1. 1.4.1.1. Diffuse emissions

            1. BAT 90. In order to prevent or reduce diffuse emissions from preparation...

            2. BAT 91. In order to prevent or reduce diffuse emissions from material...

            3. BAT 92. In order to prevent or reduce diffuse emissions from charging,...

            4. BAT 93. In order to prevent or reduce diffuse emissions from remelting,...

          2. 1.4.1.2. Channelled dust emissions

            1. BAT 94. In order to reduce dust and metal emissions to air...

            2. BAT 95. In order to reduce dust and metal emissions to air...

            3. BAT 96. In order to reduce dust and metal emissions to air...

            4. BAT 97. In order to reduce dust and metal emissions to air...

          3. 1.4.1.3. Organic compound emissions

            1. BAT 98. In order to reduce emissions of organic compounds to air...

            2. BAT 99. In order to reduce PCDD/F emissions to air from the...

          4. 1.4.1.4. Sulphur dioxide emissions

            1. BAT 100. In order to prevent or reduce SO2 emissions to air...

              1. Description

        2. 1.4.2. Soil and groundwater protection

          1. BAT 101. In order to prevent the contamination of soil and groundwater...

        3. 1.4.3. Waste water generation and treatment

          1. BAT 102. In order to prevent the generation of waste water from...

          2. BAT 103. In order to reduce emissions to water from battery preparation...

        4. 1.4.4. Waste

          1. BAT 104. In order to reduce the quantities of waste sent for...

          2. BAT 105. In order to allow the recovery of the polypropylene and...

            1. Applicability

          3. BAT 106. In order to reuse or recover the sulphuric acid collected...

          4. BAT 107. In order to reduce the quantities of waste sent for...

      9. 1.5. BAT CONCLUSIONS FOR ZINC AND/OR CADMIUM PRODUCTION

        1. 1.5.1. Primary zinc production

          1. 1.5.1.1. Hydrometallurgical zinc production

            1. 1.5.1.1.1. Energy

              1. BAT 108. In order to use energy efficiently, BAT is to recover...

            2. 1.5.1.1.2. Air emissions

              1. 1.5.1.1.2.1. Diffuse emissions

                1. BAT 109. In order to reduce diffuse dust emissions to air from...

                2. BAT 110. In order to reduce diffuse dust emissions to air from...

                3. BAT 111. In order to reduce diffuse emissions to air from leaching,...

                4. BAT 112. In order to reduce diffuse emissions to air from electrowinning,...

              2. 1.5.1.1.2.2. Channelled emissions

                1. BAT 113. In order to reduce dust and metal emissions to air...

                2. BAT 114. In order to reduce zinc and sulphuric acid emissions to...

            3. 1.5.1.1.3. Soil and groundwater protection

              1. BAT 115. In order to prevent soil and groundwater contamination, BAT is...

            4. 1.5.1.1.4. Waste water generation

              1. BAT 116. In order to reduce fresh water consumption and prevent the...

            5. 1.5.1.1.5. Waste

              1. BAT 117. In order to reduce the quantities of waste sent for...

              2. BAT 118. In order to make the leaching waste suitable for final...

                1. Description

          2. 1.5.1.2. Pyrometallurgical zinc production

            1. 1.5.1.2.1. Air emissions

              1. 1.5.1.2.1.1. Channelled dust emissions

                1. BAT 119. In order to reduce dust and metal emissions to air...

                  1. Applicability

                2. BAT 120. In order to reduce SO2 emissions to air (other than...

        2. 1.5.2. Secondary zinc production

          1. 1.5.2.1. Air emissions

            1. 1.5.2.1.1. Channelled dust emissions

              1. BAT 121. In order to reduce dust and metal emissions to air...

              2. BAT 122. In order to reduce dust and metal emissions to air...

                1. Applicability

            2. 1.5.2.1.2. Organic compound emissions

              1. BAT 123. In order to reduce emissions of organic compounds to air...

            3. 1.5.2.1.3. Acid emissions

              1. BAT 124. In order to reduce emissions of HCl and HF to...

          2. 1.5.2.2. Waste water generation and treatment

            1. BAT 125. In order to reduce the consumption of fresh water in...

              1. Description

            2. BAT 126. In order to prevent or reduce halide emissions to water...

        3. 1.5.3. Melting, alloying and casting of zinc ingots and zinc powder...

          1. 1.5.3.1. Air emissions

            1. 1.5.3.1.1. Diffuse dust emissions

              1. BAT 127. In order to reduce diffuse dust emissions to air from...

            2. 1.5.3.1.2. Channelled dust emissions

              1. BAT 128. In order to reduce dust and metal emissions to air...

          2. 1.5.3.2. Waste water

            1. BAT 129. In order to prevent the generation of waste water from...

          3. 1.5.3.3. Waste

            1. BAT 130. In order to reduce the quantities of waste sent for...

        4. 1.5.4. Cadmium production

          1. 1.5.4.1. Air emissions

            1. 1.5.4.1.1. Diffuse emissions

              1. BAT 131. In order to reduce diffuse emissions to air, BAT is...

            2. 1.5.4.1.2. Channelled dust emissions

              1. BAT 132. In order to reduce dust and metal emissions to air...

          2. 1.5.4.2. Waste

            1. BAT 133. In order to reduce the quantities of waste sent for...

      10. 1.6. BAT CONCLUSIONS FOR PRECIOUS METALS PRODUCTION

        1. 1.6.1. Air emissions

          1. 1.6.1.1. Diffuse emissions

            1. BAT 134. In order to reduce diffuse emissions to air from a...

            2. BAT 135. In order to reduce diffuse emissions to air from smelting...

            3. BAT 136. In order to reduce diffuse emissions to air from leaching...

            4. BAT 137. In order to reduce diffuse emissions from a hydrometallurgical operation,...

            5. BAT 138. In order to reduce diffuse emissions to air from incineration,...

            6. BAT 139. In order to reduce diffuse emissions to air from the...

          2. 1.6.1.2. Channelled dust emissions

            1. BAT 140. In order to reduce dust and metal emissions to air...

          3. 1.6.1.3. NOX emissions

            1. BAT 141. In order to reduce NOX emissions to air from a...

          4. 1.6.1.4. Sulphur dioxide emissions

            1. BAT 142. In order to reduce SO2 emissions to air (other than...

            2. BAT 143. In order to reduce SO2 emissions to air from a...

          5. 1.6.1.5. HCl and Cl2 emissions

            1. BAT 144. In order to reduce HCl and Cl2 emissions to air...

          6. 1.6.1.6. NH3 emissions

            1. BAT 145. In order to reduce NH3 emissions to air from a...

          7. 1.6.1.7. PCDD/F emissions

            1. BAT 146. In order to reduce PCDD/F emissions to air from a...

        2. 1.6.2. Soil and groundwater protection

          1. BAT 147. In order to prevent soil and groundwater contamination, BAT is...

        3. 1.6.3. Waste water generation

          1. BAT 148. In order to prevent the generation of waste water, BAT...

        4. 1.6.4. Waste

          1. BAT 149. In order to reduce the quantities of waste sent for...

      11. 1.7. BAT CONCLUSIONS FOR FERRO-ALLOYS PRODUCTION

        1. 1.7.1. Energy

          1. BAT 150. In order to use energy efficiently, BAT is to recover...

          2. BAT 151. In order to use energy efficiently, BAT is to recover...

          3. BAT 152. In order to use energy efficiently, BAT is to recover...

            1. Applicability

        2. 1.7.2. Air emissions

          1. 1.7.2.1. Diffuse dust emissions

            1. BAT 153. In order to prevent or reduce and collect diffuse emissions...

          2. 1.7.2.2. Channelled dust emissions

            1. BAT 154. In order to reduce dust and metal emissions to air...

            2. BAT 155. In order to reduce dust and metal emissions to air...

              1. Applicability

            3. BAT 156. In order to reduce dust and metal emissions to air...

            4. BAT 157. In order to reduce dust and metal emissions to air...

            5. BAT 158. In order to reduce dust and metal emissions to air...

          3. 1.7.2.3. PCDD/F emissions

            1. BAT 159. In order to reduce PCDD/F emissions to air from a...

          4. 1.7.2.4. PAH and organic compound emissions

            1. BAT 160. In order to reduce PAH and organic compound emissions to...

        3. 1.7.3. Waste

          1. BAT 161. In order to reduce the quantities of slag sent for...

          2. BAT 162. In order to reduce the quantities of filter dust and...

      12. 1.8. BAT CONCLUSIONS FOR NICKEL AND/OR COBALT PRODUCTION

        1. 1.8.1. Energy

          1. BAT 163. In order to use energy efficiently, BAT is to use...

        2. 1.8.2. Air emissions

          1. 1.8.2.1. Diffuse emissions

            1. BAT 164. In order to reduce diffuse dust emissions to air from...

            2. BAT 165. In order to reduce diffuse dust emissions to air from...

            3. BAT 166. In order to reduce diffuse dust emissions from converting processes,...

            4. BAT 167. In order to reduce diffuse emissions from atmospheric and pressure...

            5. BAT 168. In order to reduce diffuse emissions from solvent extraction refining,...

            6. BAT 169. In order to reduce diffuse emissions from electrowinning, BAT is...

            7. BAT 170. In order to reduce diffuse emissions from the hydrogen reduction...

          2. 1.8.2.2. Channelled dust emissions

            1. BAT 171. When processing sulphidic ores, in order to reduce dust and...

          3. 1.8.2.3. Nickel and chlorine emissions

            1. BAT 172. In order to reduce nickel and chlorine emissions to air...

            2. BAT 173. In order to reduce nickel emissions to air from the...

          4. 1.8.2.4. Sulphur dioxide emissions

            1. BAT 174. When processing sulphidic ores, in order to reduce SO2 emissions...

          5. 1.8.2.5. NH3 emissions

            1. BAT 175. In order to reduce NH3 emissions to air from nickel...

        3. 1.8.3. Waste

          1. BAT 176. In order to reduce the quantities of waste sent for...

      13. 1.9. BAT CONCLUSIONS FOR CARBON AND/OR GRAPHITE PRODUCTION

        1. 1.9.1. Air emissions

          1. 1.9.1.1. Diffuse emissions

            1. BAT 177. In order to reduce diffuse PAH emissions to air from...

          2. 1.9.1.2. Dust and PAH emissions

            1. BAT 178. In order to reduce dust emissions to air from the...

            2. BAT 179. In order to reduce dust and PAH emissions to air...

            3. BAT 180. In order to reduce dust and PAH emissions to air...

            4. BAT 181. In order to reduce dust and PAH emissions to air...

          3. 1.9.1.3. Sulphur dioxide emissions

            1. BAT 182. In order to reduce SO2 emissions to air when there...

          4. 1.9.1.4. Organic compound emissions

            1. BAT 183. In order to reduce emissions of organic compounds to air,...

        2. 1.9.2. Waste

          1. BAT 184. In order to reduce the quantities of waste sent for...

      14. 1.10. DESCRIPTION OF TECHNIQUES

        1. 1.10.1. Air emissions

          1. 1.10.1.1. Dust emissions

          2. 1.10.1.2. NOX emissions

          3. 1.10.1.3. SO2, HCl, and HF emissions

          4. 1.10.1.4. Mercury emissions

          5. 1.10.1.5. VOC, PAH, and PCDD/F emissions

        2. 1.10.2. Water emissions

        3. 1.10.3. Other

Back to top

Options/Help

Print Options

You have chosen to open the Whole Decision

The Whole Decision you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources