Directive 2001/82/EC of the European Parliament and of the CouncilShow full title

Article 80 U.K.

[F1 1. The competent authority of the Member State concerned shall ensure, by means of repeated inspections and, if necessary, unannounced inspections, and where appropriate, by asking an Official Medicines Control Laboratory or a laboratory designated for that purpose to conduct tests on samples, that the legal requirements relating to veterinary medicinal products are complied with.

The competent authority may also carry out unannounced inspections at the premises of manufacturers of active substances used as starting materials for veterinary medicinal products, and of the premises of the marketing authorisation holder whenever it considers that there are grounds for suspecting non-compliance with the provisions of Article 51. Such inspections may also be carried out at the request of another Member State, the Commission or the Agency.

In order to verify whether the data submitted in order to obtain a conformity certificate comply with the monographs of the European Pharmacopoeia, the standardisation body for nomenclatures and quality norms within the meaning of the Convention relating to the elaboration of a European Pharmacopoeia (1) (European Directorate for the Quality of Medicines) may ask the Commission or the Agency to request such an inspection when the starting material concerned is the subject of a European Pharmacopoeia monograph.

The competent authority of the Member State concerned may carry out inspections of starting material manufacturers at the manufacturer's own request.

Such inspections shall be carried out by authorised representatives of the competent authority who shall be empowered to:

(a) inspect manufacturing or trading establishments and any laboratories entrusted by the holder of the manufacturing authorisation with the task of carrying out control tests pursuant to Article 24;

(b) take samples including with a view to an independent analysis by an Official Medicines Control Laboratory or by a laboratory designated for that purpose by a Member State;

(c) examine any documents relating to the object of the inspection, subject to the provisions in force in the Member States on 9 October 1981 placing restrictions on these powers with regard to the description of the manufacturing method;

(d) inspect the premises, records and documents of marketing authorisation holders or any firms performing the activities described in Title VII, and in particular Articles 74 and 75 thereof, on behalf of a marketing authorisation holder.]

2. Member States shall take all appropriate measures to ensure that the manufacturing processess used in the manufacture of immunological veterinary medicinal products are completely validated and batch-to-batch consistency is ensured.

[F1 3. The authorised representatives of the competent authority shall report after each of the inspections mentioned in paragraph 1 on whether the principles and guidelines on good manufacturing practice referred to in Article 51 or, where appropriate, the requirements set out in Title VII, are being complied with. The inspected manufacturer or market authorisation holder shall be informed of the content of such reports.]

[F2 4. Without prejudice to any arrangements which may have been concluded between the Community and a third country, a Member State, the Commission or the Agency may require a manufacturer established in a third country to undergo an inspection as referred to in paragraph 1.

5. Within 90 days after an inspection as referred to in paragraph 1, a certificate of good manufacturing practice shall be issued to the manufacturer if the inspection established that the manufacturer in question is complying with the principles and guidelines on good manufacturing practice as provided for by Community law.

In the event of an inspection carried out at the request of the European Pharmacopoeia, a certificate of compliance with the monograph shall be issued, if appropriate.

6. Member States shall enter the certificates of good manufacturing practice which they issue in a Community database managed by the Agency on behalf of the Community.

7. If the outcome of the inspection as referred to in paragraph 1 is that the manufacturer does not comply with the principles and guidelines of good manufacturing practice as provided for by Community legislation, the information shall be entered in the Community database as referred to in paragraph 6.]

Textual Amendments

F1 Substituted by Directive 2004/28/EC of the European Parliament and of the Council of 31 March 2004 amending Directive 2001/82/EC on the Community code relating to veterinary medicinal products.

F2 Inserted by Directive 2004/28/EC of the European Parliament and of the Council of 31 March 2004 amending Directive 2001/82/EC on the Community code relating to veterinary medicinal products.

(1)

[F1 OJ L 158, 25.6.1994, p. 19 .]

Textual Amendments

F1 Substituted by Directive 2004/28/EC of the European Parliament and of the Council of 31 March 2004 amending Directive 2001/82/EC on the Community code relating to veterinary medicinal products.