- Latest available (Revised)
- Original (As adopted by EU)
Commission Implementing Decision (EU) 2016/1032 of 13 June 2016 establishing best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council, for the non-ferrous metals industries (notified under document C(2016) 3563) (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
This version of this Decision was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
BAT-associated emission levels: See Table 46.
The applicability of a bag filter may be limited in the case of low ambient temperatures (– 20 °C to – 40 °C) and high humidity of the off-gases, as well as for the crushing of CaSi due to safety concerns (i.e. explosivity).
BAT-associated emission levels: See Table 46.
BAT-associated emission levels: See Table 46.
a Descriptions of the techniques are given in Section 1.10. | ||
Techniquea | Applicability | |
---|---|---|
a | Wet scrubber in combination with an ESP | Generally applicable |
b | Bag filter | Generally applicable unless safety concerns exist related to the CO and H2 content in the exhaust gases |
BAT-associated emission levels: See Table 46.
BAT-associated emission levels: See Table 46.
BAT-associated emission levels for dust emissions to air from ferro-alloys production
a As an average over the sampling period. | ||
b As a daily average or as an average over the sampling period. | ||
c The upper end of the range can be up to 10 mg/Nm3 for cases where a bag filter cannot be used. | ||
d The upper end of the range may be up to 15 mg/Nm3 for the production of FeMn, SiMn, CaSi due to the sticky nature of the dust (caused e.g. by its hygroscopic capacity or chemical characteristics) affecting the efficiency of the bag filter. | ||
e Dust emissions are expected to be towards the lower end of the range when emissions of metals are above the following levels: 1 mg/Nm3 for lead, 0,05 mg/Nm3 for cadmium, 0,05 mg/Nm3 for chromiumVI, 0,05 mg/Nm3 for thallium. | ||
Parameter | Process | BAT-AEL (mg/Nm3) |
---|---|---|
Dust |
| 2-5a |
Crushing, briquetting, pelletising and sintering | 2-5b c | |
Open or semi-closed submerged arc furnace | 2-5b d e | |
| 2-5b |
The associated monitoring is in BAT 10.
The Whole Decision you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: