- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Gwreiddiol (a wnaed Fel)
There are multiple versions of this provision on screen. These apply to different geographical extents.
The term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
Sometimes the text of a provision is changed, but the change(s) only apply to a particular geographical area. In some limited cases where this happens, the editorial team create a version for each different geographical area. Multiple versions are only created in this way where the change in question is a substitution so that there are different versions of the text for the different extents. Insertions and repeals of text do not give rise to such multiple versions.
There are currently no known outstanding effects for the The Recreational Craft Regulations 2017, Section 54.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
54.—[F2(1) The UK marking must be affixed visibly, legibly and indelibly—
(a)to the product; or
(b)where paragraph (1A) applies, to—
(i)a label affixed to the product; or
(ii)a document accompanying the product.]
[F3(1A) For a period of [F4seven years] beginning with IP completion day, the UK marking may be affixed to—
(a)a label affixed to the product; or
(b)a document accompanying the product.]
(2) Where [F5paragraph (1A) does not apply and] it is not possible or warranted, on account of the nature of a component to affix the [F6UK] marking in accordance with [F7paragraph (1)(a)], the [F6UK] marking must be affixed to—
(a)the packaging; and
(b)the accompanying documents.
(3) [F8Except where paragraph (3A) applies] where the product referred to in paragraph (1)—
(a)is a watercraft, the [F9UK] marking must be affixed to the watercraft builder’s plate and mounted separately from the watercraft identification number; or
(b)is a propulsion engine, the [F9UK] marking must be affixed on the engine.
[F10(3A) For a period of 24 months beginning with IP completion day, the UK marking may be affixed to—
(a)a label affixed to the watercraft or propulsion engine; or
(b)a document accompanying the watercraft or propulsion engine.]
(4) The [F11UK] marking must be followed by the identification number of the [F12approved] body where—
(a)that body is involved in the production control phase of the conformity assessment under Modules A (internal production control), A1 (internal production control plus supervised product testing) or C (conformity to type based on internal production control) set out in [F13Schedule 15]; or
(b)where a post construction assessment set out in Schedule 5 of these Regulations is being used.
(5) The identification number of the [F14approved] body must be affixed—
(a)by the [F14approved] body itself; or
(b)under the instructions of the [F14approved] body by the manufacturer.
Extent Information
E1This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F1Words in reg. 54 heading substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 35(a) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F2Reg. 54(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 35(b) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2; S.I. 2020/1460, reg. 1(4), Sch. 3 para. 20(6)(a)); 2020 c. 1, Sch. 5 para. 1(1)
F3Reg. 54(1A) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 35(ba) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2; S.I. 2020/1460, reg. 1(4), Sch. 3 para. 20(6)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F4Words in reg. 54(1A) substituted (E.W.S) (31.12.2022) by The Product Safety and Metrology (Amendment and Transitional Provisions) Regulations 2022 (S.I. 2022/1393), regs. 1(1), 3, Sch. 2
F5Words in reg. 54(2) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 35(bb)(i) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2; S.I. 2020/1460, reg. 1(4), Sch. 3 para. 20(6)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F6Word in reg. 54(2) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 35(bb)(ii) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2; S.I. 2020/1460, reg. 1(4), Sch. 3 para. 20(6)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F7Words in reg. 54(2) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 35(bb)(iii) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2; S.I. 2020/1460, reg. 1(4), Sch. 3 para. 20(6)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F8Words in reg. 54(3) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 35(bc)(i) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2; S.I. 2020/1460, reg. 1(4), Sch. 3 para. 20(6)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F9Word in reg. 54(3) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 35(bc)(ii) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2; S.I. 2020/1460, reg. 1(4), Sch. 3 para. 20(6)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F10Reg. 54(3A) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 35(bd) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2; S.I. 2020/1460, reg. 1(4), Sch. 3 para. 20(6)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F11Word in reg. 54(4) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 35(be) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2; S.I. 2020/1460, reg. 1(4), Sch. 3 para. 20(6)(b)); 2020 c. 1, Sch. 5 para. 1(1)
F12Word in reg. 54(4) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 35(ba) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2; S.I. 2019/1246, regs. 1(3), 16(a)); 2020 c. 1, Sch. 5 para. 1(1)
F13Words in reg. 54(4)(a) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 35(c) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F14Word in reg. 54(5) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 35(d) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
Commencement Information
I1Reg. 54 in force at 3.8.2017, see reg. 1
54.—(1) The CE marking must be affixed visibly, legibly and indelibly to the product.
(2) Where it is not possible or warranted, on account of the nature of a component to affix the CE marking in accordance with paragraph (1), the CE marking must be affixed to—
(a)the packaging; and
(b)the accompanying documents.
(3) Where the product referred to in paragraph (1)—
(a)is a watercraft, the CE marking must be affixed to the watercraft builder’s plate and mounted separately from the watercraft identification number; or
(b)is a propulsion engine, the CE marking must be affixed on the engine.
(4) The CE marking must be followed by the identification number of the notified body where—
(a)that body is involved in the production control phase of the conformity assessment under Modules A (internal production control), A1 (internal production control plus supervised product testing) or C (conformity to type based on internal production control) set out in Annex II of Decision 768/2008; or
(b)where a post construction assessment set out in Schedule 5 of these Regulations is being used.
(5) The identification number of the notified body must be affixed—
(a)by the notified body itself; or
(b)under the instructions of the notified body by the manufacturer.
Extent Information
E2This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Commencement Information
I2Reg. 54 in force at 3.8.2017, see reg. 1
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
Yr Offeryn Cyfan you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Y Rhestrau you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i Deddfwyd neu y’i Gwnaed): Mae'r wreiddiol fersiwn y ddeddfwriaeth fel ag yr oedd pan gafodd ei deddfu neu eu gwneud. Ni wnaed unrhyw newidiadau i’r testun.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Mae Memoranda Esboniadol yn nodi datganiad byr o ddiben Offeryn Statudol ac yn rhoi gwybodaeth am ei amcan polisi a goblygiadau polisi. Maent yn ceisio gwneud yr Offeryn Statudol yn hygyrch i ddarllenwyr nad oes ganddynt gymhwyster cyfreithiol, ac maent yn cyd-fynd ag unrhyw Offeryn Statudol neu Offeryn Statudol Drafft a gyflwynwyd ger bron y Senedd o Fehefin 2004 ymlaen.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys